Reviews
Fits: KAWASAKI NINJA250R, KAWASAKI NINJA400 (2014-)
Fits a 2020 NINJA2 Helmet 50R
2020 NINJA2 Helmet50R (EX250P) attached to the
This is not necessary when you remove the Mirror, but it is one point.
It's a bit pricey for a Mirror Hole Cover, so I think the cost is a bit low.
It's well made, so I guess it can't be helped.
View detail
Perfect for PetitCustom
The weight and aluminum anodized finish makes it look more luxurious than OEM. The only thing is that the price is a little bit expensive, so if you can reduce the price a little bit, it would be better. I am satisfied with the product. View detail
Fits: SUZUKI GSX-S125, SUZUKI GSX-R125, SUZUKI GSX-S125, SUZUKI GSX-R125
It's great for Clutch2Finger!
[How is it used?
This is a conversion from OEM.
Was the installation difficult?
For the Clutch Side, you will need to remove and install the Cable.
How was your experience with it?
It's a short bar, so it's especially good for those who grip the Clutch Side with two fingers, index and middle.
[Notes]
There are some models that cannot be installed, so please check before purchasing.
View detail
It is safe.
[How is it used?
I installed it the other day.
Was the one you received as per Image?
Yes. Just like the picture.
Was the installation difficult?
It is easy to raise it with Rear stand and fix it with Hexagonal Wrench in accordance with STAND.
How was your experience with it?
It increases stability and is easy to stop even on gravel.
[Included Parts:were they on?
Body、Screw、Instruction Manual
[Was there anything that disappointed you?
Just a little hit will scratch it and make it a little more noticeable.
View detail
Fits: KAWASAKI NINJA ZX-10R, KAWASAKI NINJA ZX-6R, KAWASAKI NINJA1000, KAWASAKI Z1000, HONDA , SUZUKI , DUCATI , KAWASAKI Z800, BMW S1000RR, TRIUMPH DAYTONA675
Good-looking and practical
When using the maintenance stand to lift up, I used the V-brake on my previous motorcycle, but with the ninja 1000, the Normal muffler would interfere with the V-brake, so I used the L-brake.
This time, I bought Stand Hook because I could finally use the V receiver after replacing the Exhaust System.
There is no instruction manual, you just put it on with a hexagon, but it is easy to loosen by vibration, so I used screw lock agent. 5 minutes is all it takes.
I selected it because of the Red color in the insert, but it is very well made.
It is also effective for Dress-up.
View detail
Fits: HONDA CBR650R, HONDA CBR650F, HONDA CB650R, HONDA CB650F
Not supported after 2021 MC
After the 2021 MC, the Right Side will be attached at one point, but the Left Side will not.
Has the shape changed slightly with the SlippersAssistClutch?
View detail
Necessary and sufficient
The quality is more than enough for the price.
The good point of this product is not only the quality but also the fact that the suspension mounting part is made of SUS to keep enough strength and the outside color is Anodized Finishing Aluminum.
The mounting nut of the rear suspension is a point where I want strength and reliability, so it was the right choice for that one point alone.
View detail
It's perfect!
The color and shape are perfect.
When you install the screw, it is better to apply the heat resistant liquid Gasket to the screw to prevent the screw from loosening.
Otherwise, oil leakage may occur.
If possible, it is safer to tighten the screw size with the specified torque.
View detail
It's perfect!
The color and shape are perfect.
When you install the screw, it is better to apply the heat resistant liquid Gasket to the screw to prevent the screw from loosening.
Otherwise, oil leakage may occur.
If possible, it is safer to tighten the screw size with the specified torque.
View detail
It's perfect!
The color and shape are perfect.
When you install the screw, it is better to apply the heat resistant liquid Gasket to the screw to prevent the screw from loosening.
Otherwise, oil leakage may occur.
If possible, it is safer to tighten the screw size with the specified torque.
View detail
wedging oneself in
Dress-up and counteracts the softening of the Asphalt under the hot sun and the ground that is easy to sink into.
I was very pleased with the color.
If you have two people, one to raise the car and one to install, it is easy to install.
View detail
Fits: KAWASAKI NINJA ZX-10R, KAWASAKI NINJA ZX-6R, KAWASAKI NINJA1000, KAWASAKI Z1000, HONDA , SUZUKI , DUCATI , KAWASAKI Z800, BMW S1000RR, TRIUMPH DAYTONA675
No problem
It can be used for maintenance and dress-up.
It has a nice color.
View detail
Fits: HONDA MONKEY125, HONDA GROM, HONDA GROM
Stable Lidea
Even if I put my finger on the Lever, I do not feel uncomfortable because of the smooth Curve. I have used three Lever of Lidea with this, and I cannot return to the square Lever any more. View detail
It looks cool.
It was well made and left on.
I tightened it by hand, but I was worried about Torque, so I tightened it with Torque wrench, but I tightened it too much and Screw was damaged.
Be careful when tightening as it is shaped like a Nut.
View detail
MONKEY125Head side cover installation
I was troubled with SpinnerCylinder Head Side Cover, but this one was the right choice because it interferes with Engine slider. View detail
Fits: HONDA MSX125 (GROM), HONDA MONKEY125
Used for MONKEY125
It doesn't come with an adjuster, but you can fine tune the lever position and extend it. I like the Logo and Two-tone color of RIDEA. View detail
It is easy to install.!
Just remove the Bolt at the base of the Suspension, replace it with the product in question, and tighten it with the Hexagonal Wrench, so you can complete the installation in 10 minutes.
I installed it because I plan to use the maintenance stand when I do chain maintenance, and I like it because it matches the body color better than I expected.
View detail
Fits: YAMAHA YZF-R25 ABS, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA YZF-R3
It may be recommended for Dress-up.
This is the Impression of the one that the former Owner used to wear.
Currently in use
There are a lot of color variations, and it has an adjust mechanism so it can be short or long. I think it is a product that is also Foldable and safe in case of emergency.
However, when running with a slingshot, the number of functions does not become Advantage.
The stiffness of the lever is not good due to the adjustment mechanism and it hinders the quick lever operation. In addition, the vertical grooves on the Lever cause discomfort to the fingers beyond the Gloves, and the corners of the Lever itself cause pain during long touring. Especially, the step of the Adjust part produces pain.
Lever is scheduled to be replaced along with the MASTER replacement.
Dress-up effect is high, so I can recommend it in that respect.
View detail
Fits: YAMAHA YZF-R25 ABS, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA YZF-R3
It may be recommended for Dress-up.
This is the Impression of the one that the former Owner used to wear.
Currently in use
There are a lot of color variations, and it has an adjust mechanism so it can be short or long. I think it is a product that is also Foldable and safe in case of emergency.
However, when running with a slingshot, the number of functions does not become Advantage.
The stiffness of the lever is not good due to the adjustment mechanism and it hinders the quick lever operation. In addition, the vertical grooves on the Lever cause discomfort to the fingers over the Gloves, and the corners of the Lever itself stand up, causing pain when touring long distances.
Lever is scheduled to be replaced along with the MASTER replacement.
Dress-up effect is high, so I can recommend it in that respect.
View detail
Fits: YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA YZF-R3
Solid construction
The Grab Bar and Bracket are both well made and very rigid.
I was able to install it without any modification, but the Nut fell into the Rear cowl and I had to spend some time retrieving it.
It is advisable to allow plenty of time for the work to be done.
The gap between the Tandem seat and the rear cowl will become larger with the Bracket installed.
I think we need to take measures against flooding.
View detail