Reviews
subtle
The exhaust leak was so bad that other reviewers said that the exhaust leak was Defferential Gearォ. When I ran with the exhaust leak, oil leaked and adhered to the pipe and it was difficult to clean up.
Be careful not to over-tighten or the Flange will quickly bend.
It is very light compared to normal muffler.
The vibration that comes to the Right foot is amazing because it is tightened together with the footpeg.
The Left Side Chamber mounting bolt is longer than the OEM bolt, so you will need a slightly shorter one.
The bottom of the Chamber scraped when I rode two people over a bump.
View detail
Fits: SUZUKI INAZUMA1200(GSX1200FS)
It can be used for GS1200SS.
I bought this one to make my GS1200SS Short Tube Style.
Unlike the cheap ones, the welds are strong and the paint is durable.
It has a good, dry sound that only iron can produce.
If you like Short Tube, you'll love this.
View detail
Fits: Others
It muffles the sound considerably.
Compared to the inside, it has a much better sound deadening performance.
The bore is too small for GS1200SS.
It would be good if you are concerned about the residential area and the neighborhood.
LimitThe car did not pass inspection.
View detail
Fits: YAMAHA RZ250, YAMAHA RZ250R, YAMAHA RZ350, YAMAHA RZ350R, YAMAHA RZ250, YAMAHA RZ250R, YAMAHA RZ350, YAMAHA RZ350R
RZ Exhaust Gasket
It is the one inside the Exhaust Gasket of RZ.
It's a great help because I trade it every once in a while.
View detail
Fits: YAMAHA RZ250, YAMAHA RZ250R, YAMAHA RZ350, YAMAHA RZ350R, YAMAHA RZ250, YAMAHA RZ250R, YAMAHA RZ350, YAMAHA RZ350R
RZ250 Exhaust Gasket
It is very helpful because I change it every time when I remove the Exhaust Gasket Exhaust System of RZ. View detail
RZEngine gasket
It helps when you remove the cylinder and expose the clutch side of the RZ.
This time I bought it as Spare
View detail
Fits: YAMAHA RZ250, YAMAHA RZ350, YAMAHA RZ250, YAMAHA RZ350
Rounded eyes of MT-25
It's a great product, I just had to cut it down a little because it was interfering with my Main switch. View detail
Fits: YAMAHA RZ250, YAMAHA RZ250R, YAMAHA RZ350, YAMAHA RZ350R, YAMAHA RZ250, YAMAHA RZ250R, YAMAHA RZ350, YAMAHA RZ350R
usually
I replaced the Clutch because it was ruined. Made abroad?
With Gasket is grateful.
It's not a Reinforced Clutch, so it's easy to ride around town.
I don't know how durable it is, but it looks like it will be safe to ride for a while.
View detail
ParaGunOwner should be considered a priority purchase.
First of all, it is light.
I had a Normal chamber with a Daytonasilencer and it was over 2kg lighter than that.
This means a weight reduction of more than 4kg for two bottles.
Thanks to this, the handling has become lighter.
As for the performance, it has more torque at low speed and easier to start. (Lighter weight may also have helped?).
The sound is also, well, good.
Also, for some reason, it started better.
Since you're driving the Chamber section pretty far inward, do you have a bank angle? (Will the footpeg ground before that …)
Another Merit is the ParaGun (or VGun?). You can be free from the exhaust leak which is the trouble of the owner.
It's a mainstream Bolt 3-tightening system, so if the pitch is right, you can use other models or Universal Product.
There was an opinion that it interferes with Tandem Footpeg, but it is not such a thing at all.
There is enough Clearance.
However, because my unit has been replaced with the Radiator of the type 2, the lower part of the Radiator interferes with the Spring of the Exhaust pipe, and the vibration of the Engine makes the imprint sound.
ParaGunOwner is definitely better off buying a Zestian instead of buying a ridiculously expensive OEM Exhaust System on Yahoo!
In recent years, ParaGun parts in Ok. "I think you've got the wrong number of Zeros. And that's the price.
The only drawback is that the silencer is thin and short, so it doesn't have much power (it's a matter of taste …)
View detail
Quantity:Pair (for Left and Right) Compared to Single Silencer
Quantity of the same Stainless Steel:Pair (for Left and Right) I also used Single Silencer's Zess Chamber about 6 months ago.
The sound is the same Stainless Steel, so I can only say it sounds good.
But for some reason, this one has more ground clearance.
Quantity:Pair (for Left and Right) The Single Silencer is CROSSed and the expansion chamber on the Right Cylinder side sticks out to the lower side like a large one, so it rubs only when banking lightly.
But the installation work is done by Quantity:Pair (for Left and Right) It's a RightDual Silencer, so even if you don't have the Instruction Manual, you can still figure out which is which because of the weird shape. The only thing is that the mounting point is not Quantity:Pair (for Left and Right) It is different in
CROSS the right cylinder side to OEM position and CROSS the left cylinder side to co-fasten with footpeg.
Is this really Exclusive Design? I had a hard time to install it.
I will tweak it later at a brighter time.
View detail
Fits: KAWASAKI ZEPHYR750
Cis tube
Design, volume, sound quality, all are Large strange satisfaction. View detail
Fits: HONDA CB750
Inner silencer-like processing is done, but it is almost a straight pipe.
The inner silencer is not attached, but the silencer part is processed like inner silencer. The volume is a little quieter than Short Tube. (When Idling) It's a blast when you turn it. (Lol)
The sound quality is very good thanks to the long length and the inner silencer at the back. The sound quality is long and the inner silencer is processed.
The performance doesn't feel any faster. (Lol)
It is made in two pieces, and the insertion port is ragged, so it is necessary to process it if you are worried about it.
If you can't handle the noise, you need an inner silencer.
I think it is safer to change to a different bracket because the back bracket is probably dangerous.
Maybe not for the nervous because of the dirty after weld?
This is my favorite exhaust system I've ever bought because it sounds and looks great.
View detail
Fits: その他
CB750 rc42 Mizuno MotorSpenser tube installed on 70 pie
Because the Baffle is not attached to the Spenser tube, I installed the medium Baffle of another manufacturer, but the volume is too small, so I bought the Mizuno MotorLargeBaffle. The sound quality is a little thicker and I think it became the bass like Large type vehicle. I think, but the volume did not change with the above medium Baffle and Large. Afterwards, the production is sundry! (The same applies to Spenser tubes) It is not suitable for people who are nervous about appearance. It has a slight rattle, so it makes a chattering sound, so countermeasures are necessary. I was not satisfied with the volume, so I ordered an additional LargeBaffle. By the way, when I use Spenser tube as a straight tube, it makes a super heavy bass sound in the low-mid speed range and a powerful high sound in the mid-speed range. It is not suitable for the person who is nervous because there is a rattle. View detail
Fits: Others
Short TubeInner silencer
I bought the Inner silencer with the narrowest exit for the car inspection, and it passed the inspection in one shot. View detail
Fits: KAWASAKI Z1, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1, KAWASAKI Z2 (750RS/Z750FOUR)
For bulk purchases
Anyway, it's cheap!
I buy them in bulk because I change the oil every 3000km and I change the oil 3 or 4 times a year.
I have no complaints about the quality or feel of the product.
I hope that the supply will remain stable.
View detail
Fits: HONDA CB750
Pitch and all on the install, it was perfect! Sounds pretty good too, supremely happy with it!
I got it aligned perfectly, including the mounting Pitch!
Great sound, great design, I'm happy with it!
View detail
I'm a little nervous about the rigidity.
The rigidity was still a little unsatisfactory compared to the OEM.
I felt that the curve is very large and twisted.
View detail
Mizuno for Honda
If any bad to report it would be the heat treated paint finish. Very thin coat of paint. I noticed this and ceramic coated my Mizuno. As for quality the exhaust fits well. The quality of the bends are good. As for the sound it is VERY loud. The bike screams. Even with the 29.5mm baffle it is still loud. The look of the exhaust is beautiful. I love it. Quality for the price is ok. If Mizuno used a better finish like ceramic it would be perfect. View detail
Fits: YAMAHA RZ250, YAMAHA RZ250R, YAMAHA RZ350, YAMAHA RZ350R, YAMAHA RZ250, YAMAHA RZ250R, YAMAHA RZ350, YAMAHA RZ350R
RZ250 Mizuno Motor Exhaust Gasket
I purchased this product as a consumable when replacing the Exhaust System.
I chose this product because the quality is almost the same as OEM and the price is cheaper than OEM.
If the function is comparable to OEM, such as a non-reusable gasket like Exhaust Gasket, you can choose the cheaper one.
I am satisfied with this product.
View detail
Fits: YAMAHA RZ250, YAMAHA RZ350, YAMAHA RZ250, YAMAHA RZ350
I put STD Type Handlebar Mount Polishing for ZES RZ250.
The Handlebar was damaged by a fall and I bought this to repair it.
OEMParts are still available, but they were over 10,000 yen, so I went through them.
In Universal, I thought about the cheap Made by HURRICANE, but the details of Handlebar were hard to understand and there was uneasiness of interference etc., so I chose this Manufacturer which is famous for Restore parts of RZ.
It was painted in frosted Black and had a nice texture.
I couldn't compare it with NORMAL, but Position was almost the same as before, no problem.
It was not a problem because it was the part which was hidden by Switchetc. though the place where Garbage seemed to be attached when painting partly was seen.
View detail