Reviews
Hard one to review: great tank, great fit, paint so-so
Ok this review is in a few sections: Shape: The tank is an excellent copy of the original tank. Very happy with that aspect. Fit: It fits the bike perfectly and all the parts fit on it fine as well. Its a well executed copy for sure. Paint: This is where it goes off the rails a bit. This is a A$260ish paint job so its hard to be too picky i guess? Anyway... Its what a local high quality paint shop called 'an 80% job'. Its ok, but there are some marks in the clear and its a bit orange peely. The painted 'decal stripes' are well done and it looks good from a few paces. Colour: Its not OEM. The maroon should be much more red and the white pearl is very 'champagne'. I kinda like it, but it not the clean bright version you might expect. Delivery: It got damaged on the underside edge of the seam during the shipping as the box was only the one used for a tank in primer and very little extra packing was used, this is rare for a part from Japan to be honest. Sadly, I didnt notice this until almost a year was passed and i went to use it so i was stuck with the problem. I did ask the company who did the paint (using the webike message service) for information about the paint in the hope of having some mixed locally and theyt refused to share that information. This was very dissapointing as i am left with a tank with a 10c piece sized chip from its lower seam and a bad taste in my mouth. Summary: the paint is A$260 and you get what you pay for, the base tank is excellent. View detail
Fits: YAMAHA RZ350, YAMAHA RZ350R, YAMAHA RZ350, YAMAHA RZ350R
Hard-to-find Yamaha Parts - fast delivery to the US
I want to thank you for offering parts for older bikes that exist only when they are dismantled and offered on auction sites. Also, delivery was extremely fast, and it was exactly the part advertised and what was necessary to complete my engine build. Thanks so much. I will be returning to your site constantly for parts and informstion avasilsble nowhere else on the web. Thanks. 1974 Yamaha RZ350 View detail
Fits: HONDA CB900, HONDA CB750F, HONDA CB1100F
The best
I was very pleased with the purchase of the Zess tube. View detail
Fits: HONDA CB1100
Check the compatibility carefully!
A little to the sound of MORIWAKIShort Tube
I felt like I was missing something.
I bought a zess tube.
The product arrived quickly.
The packaging is also beautifully done.
It was very good.
Zess tube is Center Stand:○
The oil filter can be replaced.
The maintenance part after installation is taken into consideration.
I think it's perfect
Regarding installation.
I'm working on replacing the MORIWAKIShort Tube with a zess tube.
But even as a very novice (first time) person, I was able to see the difference.
It took about an hour and a half to do.
In the time it took to order and receive the zess tubes.
What should I prepare for Others on youtube?
If you do it by checking what you need to pay attention to.
I think I can do it perfectly.
(Long live Youtube.)
What is the problem?
Points that a layman might notice later (Petit important)
My year is a 2017 model, so
The OEM has a Dual Exhaust System.
The Exhaust System is equipped with an O2 Sensor.
(What is an O2 sensor?) It measures the amount of exhaust gas in the exhaust system and measures the amount of gas in the exhaust system.
(A role like letting Injection adjust the fuel = Large thing)
The Dual Exhaust System has a quantity of O2 sensors.:Pair (for Left and Right) one place each
Total Quantity:2pc. It comes with a set.
MORIWAKIShort Tube is also a collective tube, but
The O2 sensor was modified so that it can be installed in two places.
Only one part of the zess tube is machined.
The O2 sensor for one location is wrapped with Vinyl Tape.
You can fix it to the bottom of the frame.
Exhaust Gas from one side of the O2 Sensor as described above.
The Engine will change its tune as it becomes unable to take measurements.
Also, the Lamp on the Engine warning light sometimes stays on.
There are quite a few. (I'm running and I'm worried about Brown's pain.)
Regarding sound
Since the Baffle can be removed
You can hear the sound of straight pipes (be prepared for a lot of things if you want to run).
Everyone in the town turned around at the sound of the fighter jet level.
If you take the Sound-absorbing Mat and use it, you can get a lot of sound deadening material.
Sounds a bit like a naughty boy.
You can hear the sound at high rpm.
This part of the story alone sounds good to me.
As for sound quality, MORIWAKIShort Tube is 1000% better!
I noticed the elegance of the sound quality.
And this is the part I regret the most.
Sound quality was good, Japanese Vehicle Inspection Correspondence and O2 Sensor was fine.
Engine is also doing well.
If that's the case, I thought MORIWAKIShort Tube was definitely the way to go!
(*This is my personal opinion.)
I want to stand out with my sound! I want to make a sound that roars through the city!
This is a good choice for such people.
(*Zess tubes are sold as "for Race.")
So,
Use Situation completely [Circuit] [Circuit] [Circuit
Effect? Judge by the volume. It works.
The work-sukill is [Beginner
Design is [Normal] Is not it?
Sound and sound quality are [Normal] I made it.
View detail
Defective item
No performance or anything can be installed.
First of all, the shape of the mating part with the cylinder is different. When I inquired about it, I was told to put a Gasket in between or paint a Liquid Gasket.
In the meantime, I put on two layers of Gasket that I had.
The second cylinder side can be installed, but it is too tight.
The first cylinder side cannot even be installed because of the shape of the welded flange or because the angle of the welded flange is different.
I am currently in the process of applying for a return, but I hope for a quick response.
I don't know why I checked the fit when I ordered it.
I am very disappointed.
View detail
Fall TypeCook fits into OEM Side cover
Replaced carburetor with PWK28.
It's a little closer to the top of the left side, but it fits in the hole of the side cover without any problem.
It would be better if it had an OEM look, but the location is inconspicuous, so it's perfectly fine.
One thing I'd like to see improved is that the Yamaha OEMs at the time were lower ⇒ later ⇒ upper, but this one is lower ⇒ front ⇒ upper, which is a bit confusing to the senses.
View detail
Mirror for RZ (Mizuno Motor)
I bought the Right Side Reverse Thread Type, but the part that adjusts the angle of the Mirror is loose, and it easily changes direction while driving. It is not practical. I have requested to return it.
The other one I bought had a rattle in the attachment between the MirrorBody and the shaft, which also vibrated while driving, making it impractical.
There is a 66% chance of defective products.
It is the epitome of "cheap" and "bad".
View detail
Fits: YAMAHA RZ250R, YAMAHA RZ350R, YAMAHA RZ250R, YAMAHA RZ350R
SP Tadao JackalRSChamber's Spring Exactly!
SP Tadao JackalRSChamber's Spring 1pc. is now gone.
I searched to see if there was a Spring that would fit somewhere.
Euzo Chamber by Zess [RZ250R I bought it because it seemed to fit my needs.
I installed it and Exactly!
It looks exactly the same, so I recommend it!
View detail
Fits: KAWASAKI Zephyr 400, KAWASAKI Zephyr X
OEM same etc. performance. This is Large cut.
At the time of purchase, the Clutch was slipping due to a defect and became an instant Overhaul.
In that case, I asked the Motorcycle shop to replace it here at Parts for a little less money.
Point is that the performance of OEM same etc. and the cosmetic is good.
good point
I've been running it normally for a couple of years.
It's cheaper than OEM.
Supply is faster than OEM.
It is also durable.
A bad point
It's a good idea to have a Motorcycle shop do the replacement.
It's scary because you don't know what's inside a used car, even if it looks beautiful on the outside.
There is also the Habit of the rider, but Clutch should be noted. This is a Recommendation because it can be replaced inexpensively.
View detail
Used on ChamberTZr250 for R1Z
TZr250RightQuantity:It's 2pc and Material.:I was looking for a Stainless Steel Chamber and decided on this one.
To install, I just replaced the bracket with a 1cm longer one.
Material:I'm glad I bought this Sound at this price for Stainless Steel.
View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI z1000 (air cooled, kz) ltd, KAWASAKI Z1
Looks and sounds good
42.The 7-pipe exhaust pipe has a good parenthesis of heavy pressure when viewed from the side of the vehicle! View detail
Street chamber for Mizuno Motor RGRG250
I installed it as soon as I could, and I had no problem fitting it. I have not driven it today because of the rain, but I am satisfied with the sound and appearance. View detail
Acceleration is good!
I installed it on my CHAPPY 50.
It's completely pimped out.
Acceleration from around 40km is much better than OEM.
But the low speed has no power.
The sound is better than OEM.
There is a sense of Custom.
View detail
Fits: HONDA CB900, HONDA CB750F, HONDA CB1100F
CB900F rider.
[How is it used?
Riding in town on holidays, Touring
Was the one you received as per Image?
As you can see in the image, when I opened the package after arrival, there was a dent in the Exhaust End, and I had to return and exchange it immediately.
View detail
Mizuno is good.
For the record: The X-Cess baffle fit the Mizuno systems. I wasn't sure by the e-mails received and the measurements but they do. My Mizuno exhaust came with a 29.5mm. Which was good. But a litle restrictive for The ECU tune in my 2014 CB1100. This 40.5mm seems just right. Free flowing, LOUD but not not too loud. Just right for when you want to be heard without any rasp of a straight racing exhaust. I am happy with my purchase. For record: The X-Cess baffle fits the Mizuno system. I didn't know from the emails I received and the readings, but it certainly is. My Mizuno exhaust was 29.5mm. It was good. However, my 2014 CB1100 ECU tune has some restrictions. This 40.5mm seems to be just right. Free-flowing, loud, but not too loud. Perfect when you want to listen without using any straight racing exhaust. I am happy with my purchase. View detail
Fits: KAWASAKI KH250
350SS (S2) It goes around to the top with almost no setting.
I bought it for KH250 to install it in my wife's 350SS (Initial ModelS2). It was able to be installed perfectly.
It's cool and I'm happy with the Design.
I'm going to write what I think. It's long.
1. Installation
【It was good point】
The installation did not require any special hangs, and it went on the 350SS easily.
Because I don't know KH250, I was not prepared to attach the bracket of Rear, but it was attached without modification.
No matter how careful I was when I installed it, the flange kept falling down from the exhaust pipe, scraping the paint.
If you are replacing the exhaust system, you may have this problem.
It was
[Areas for improvement
Nothing special. I don't know how you can make a profit at this price with this build.
[Others]
As is true for all integrated pipes, when installing them, they will inevitably hit the frame, so please make sure to install them properly beforehand.
And cured the exhaust pipe side and around the rear with thick Towel and curing Tape.
Gasket is thicker OEM Product and heat resistant liquid Gasket is applied to Both Sides (Wako's GM-T).
Because the exhaust pipe does not hit the seat straight due to the way the exhaust system is made, the Gasket is a copper type.
I went with the thicker one instead of the thinner one. I used OEM Product (number:110091992). Also Gasket
In addition to the above, apply liquid Gasket to both the engine side and exhaust pipe side, and let the engine sit overnight after installation.
The engine has been started. I have run it repeatedly and so far there is no waste leak at all.
2. Performance and functions
After installation, I adjusted the Point and synchronized each carburetor with the air flow meter.
As for tuning, I think you should do it because it changes the way the exhaust flows. It was Gap as expected, so I had to align it exactly.
I've done it. I've seen a lot of 2-stroke cars that don't do anything around here, just put on a set and sound like RoseRose or have a bad rpm drop.
I'm about to do this regularly for Point, so I'll take the opportunity to re-match it and use the Carburetor setting for the ha
It doesn't matter.
(Good points and impressions, etc.)
It runs well with almost no setting, and I raised only Main to 82.5→87.5.
Idling, low speed range
The Idol range felt denser, so I stabilized it with only the Air Screw adjustment.
The low speed start is also no problem without any concern.
●Partial range
I haven't boiled it down to perfection, but it cruises normally.
High rpm and high speed range
Of course, it's a 2-stroke with a collective tube, so the thumping power from 7,000 will be Mild.
The OEM Exhaust System is the best.
●Sound
This is Psycho~. The 2-stroke set is decidedly”sound” the best part. It's a brain juice!
No!
What I want to see improved.
If I were to be selfish, I would like the inner silencer to be a trumpet type and reflect the inside of the exhaust system like the Zensin silencer.
I would like to see a Type that can be used. I'm not sure how well it will work:・・・・
I think it's OK if Cost goes up a bit for this.
3. quality and price
【It was good point】
Cheap. There are various sets of various manufacturers, but it is the cheapest.
I am a complete amateur, but I thought the welding was beautiful.
It was easy to install without any modification.
What I want to see improved.
I would like to say that I wish you could shift the rear rotation a few more centimeters to the outside to make it compatible with the Center Stand.
It's been a long time.
I think it's good to sell it for 350SS, I don't know if it's for S2A or later model, but it's perfect for Initial Model.
It is
View detail
Fits: HONDA CB1100
Style is good.
I am very happy with the product. I bought it considering the design and the cost. However, it is necessary to be careful in Corner of Right Side, and if it lays down, it will rub the lower part surely. My own is also rubbed and dented. View detail
FCR28 used Carburetor Packing For FCR Carburetor
I am using a chemical oil in FCR28 This product is the same as the original factory. Can be installed directly, no need to modify Need to buy it again It can be installed directly, no modification is required, and will be purchased again if necessary View detail
It's the savior of out-of-print cars.
I got a used front fork of CB750FC, but the oil leak didn't go away even I changed the oil seal because of point rust.
However, Honda has already discontinued the production and there is no stock and OEM Product is not available.
So I decided to replace it with an Inner pipe made by Mizuno Motor, a ThirdParty product.
There seems to be no problem in the quality because it is only used for Overhaul in the specialty store.
The Fork pipeSleeve is not included in the kit, so I ordered the OEM product separately and assembled it.
I tried to run after the exchange, but there is no problem at all, such as sliding condition and oil leak.
View detail
Fits: KAWASAKI ZEPHYR1100
clear sound
The manufacturing accuracy of the Exhaust System is high, and installation was able to be done smoothly without any difficulty. MischiefSound.
However, the exhaust release is too good, or the After Fire when Axel is put back is not so good, and Carburetor setting is necessary.
Also, it is a thing that I knew, but even if I don't drive aggressively at all, it is likely to accumulate Frass Traytion by rubbing Exhaust System with RightCorner. Well, to enjoy the atmosphere and pleasant sound which is not in the NORMAL tube, the price was cheap and it was good to buy it.
View detail