Reviews
SMART power supply
It is SMART, compact, and comes with a cable that can be connected to large devices. The price is high. View detail
Solid construction.
Since I use my smartphone as Navigation, I thought I needed a Smartphone Holder and looked at various ones from different Manufacturers. The price is quite high, but the Material:Aluminum, well built and claimed to be 'A fall won't break my phone.' I bought it partly because it was
Installation is very easy.:Since it is Aluminum, it contains a Rubber seal to protect the phone. The rubber seal is cut according to the location where you want to apply it, so all you have to do is to apply it while referring to the Instruction Manual. I think I have been using it for about 3 years and have not needed to replace the rubber yet.
View detail
I bought it to try it out.
I bought it to see what it was like.
I think it had what I needed, I don't remember if Screw lock was included.
Installation is easy and can be done quickly by referring to the Instruction Manual.
I think I have driven about 4000 km using it. At first, I was uncomfortable with the higher position of the phone, it is higher for the thickness of the Rubber part.
The softness makes it difficult to adjust the positioning of the phone. It is also difficult to detach and attach the cell phone. Well, it is a matter of getting used to it.
While driving, you can see that the vibration is mitigated. That said, the screen is not difficult to see.
It is difficult to operate the screen while the Holder is attached. Once you get used to it, it is no problem.
I think the protection of the mobile Camera is working.
It would have been nice if the rubber was a little stiffer. Also, it would have been nice if it could be kept within the length of the Parts before installation.
View detail
A different sense of security.
Since I use my smartphone as a navigation device when touring, the price was much higher than other manufacturers' holders, but I was attracted by the claim that the smartphone would not break even if it fell over.
Material:It is made of aluminum, so it is solidly built and feels like it holds the phone firmly and is firmly fixed to the handlebar. I was worried that the joints of each part might sag due to vibration, but it has been more than 3 years since I started using it and it has never sagged.
Installation is very easy, just follow the instructions in the Instruction Manual, and the Instruction Manual is easy to understand because it includes pictures.
Rubber seals are included to prevent damage to the phone, and are pre-processed to match the shape of the area to be affixed, so all you have to do is check the instruction manual for the area to be affixed and affix it.
For those touring with a smartphone instead of Navigation, the price is high, but the peace of mind is worth the price.
View detail
You can rest assured that there are issues.
Purchased this because I replaced it with an iPhone 13 unbranded. I have never used a Folder from another company, so I can't compare, but personally, it was not as squishy as I expected. I'm not sure if it's because it absorbs vibrations, though. What about the Quad Rock Damper?
I can rest assured, but I think 5,000 yen is a lot of money.
View detail
Durability is unknown.
I don't know if it really works, but I guess it does because my iPhone 11 is not broken. There is a wobble in the feel of use, but I don't mind it myself. 2 years is recommended for Parts replacement, but this is a bit short. View detail
I don't think this is the best shape.
Quantity the phone:Set will deflect by its weight. To begin with, the BUnit determines the angle between A and C. The BUnit is used to determine the angle between A and C, and the squishy Unit is used to make it difficult to position the BUnit. I wish it was easier to change the angle. If the angle is close to horizontal, you can operate the phone just fine, but if you angle it, you can't operate the phone as you want. For such an expensive product, the feel of the product was terrible. View detail
Whether it really works is a mystery.
Vibration is mitigated by sandwiching the Rubber plate between the front and back of the three feet.
It tilts under the weight of the phone, so it may be doubtful how much vibration mitigation capability it actually has if it is tilted by a heavy phone.
The Rubber board is said to be a PARTS that needs to be replaced in about 2 years, but given that the Beacom 5X Speaker is disappearing from bulk sales, it is doubtful how long it will be sold individually.
I hope SYGN HOUSE will not try to sell the same parts even if improved products are released in the future, because it is doubtful that they will be made into the same parts.
If the Rubber plate is hardened, it is still OK, but considering the possibility of deterioration such as tearing off, I wanted the front and back to be connected by a wire to prevent falling off.
Since this is a Type product that mitigates rather than suppresses vibration, it is likely that some Motorcycles will have RPMs that increase the amount of vibration that makes it difficult to see the phone as much as it decreases the amount of microvibration that can be fatal to the phone that is not visible to the human eye.
It can be used for the old product, but it is troublesome because the place to fasten it with Screw adhesive has to be removed.
View detail
A little evolution
I thought it was out of stock for a while, but it came back with a model change.
According to Manufacturer's announcement, the Knob shape and the angle adjustment range are the two large changes, and the latter can be seen in the wider opening of the actual product.
It's not hard to turn the knobs with ArmSingle Body, so what's the point of this change? The question arises. However, when I put it on the body and try to adjust it by reaching out with my hand while riding, it is certainly easy to turn.
I replaced the Arm with a RAM Mount, but the quality is still exceptional, and I think it is a product that gives off a sense of existence even now that the mounting system is no longer a special thing.
View detail
Very good except for the price.
It is one previous model but I installed it on my ADV150.
There is no product listing for the previous model, and the locking Handlebar of the Arm part is only slightly thicker than this model, so I will Review it here.
【attachment】
I thought it would be impossible to install the taper handlebar because it is a tapered handlebar that gets more compressed from the center to the apex, but I was able to fix it firmly in the middle part. Since then, it does not shift or shake.
【Texture】
It is very high. As for the aesthetics, Level is clearly an eye-catcher.
[Function]
You can freely adjust the position and angle, and install and remove the phone in an instant.
【Review】
I think this is an unusually high price for a Smartphone Holder.
I think I also bought it on the spur of the moment and flippantly called it some kind of reward.
However, the thing is so good that it seems to be a fortune if you think that you will use it for all the motorcycles you ride in the future.
If the Handlebar sutra changes, you only need to add the Handlebar Clamp.
It's a luxury item, no doubt, but it's not a Type thing you'll regret buying.
As someone who has wasted a lot of money on a lot of things, I don't feel like this product is a waste of money and I'm happy with it.
View detail
Fits: Others H4 Valve,HS1Valve DC12V lighting Minus common car
High beam not lit in a little over a year
It's been less than a year since I bought it for Hokkaido, but
I can't ride in the winter, so the High beam is now unlit, even though it's only been in use for a net of six months.
The Controller was mounted in a location that was not affected by heat, so it appears to be a durability defect on Valve's part.
It was a shoddy product.
View detail
The product is a good one, but...
You all wrote in the impresario, but I'm not happy with the way the Body is mounted either.
The Elastic band and the parts used for mounting were useless and I ended up securing it to the Handlebar with Tie Wrap.
It's a necessary improvement.
View detail
Design and texture
I am satisfied with the design and texture of this product I can have it
As for the price, it might be a bit high ^^^;
View detail
More expensive, but also more light
It is used for HeadlightPosition balls of MT-07Second Type Model I did
It's taller than the normal Valve, but it just barely fits in
The light level is so high that the car in front may be annoying
(That's how bright it is.)
One point, it's hard to see in the photo, but because of the directionality and the tallness of the Valve
The unevenness of the brightness in the Light case is very large
I'm generally satisfied, and I can't complain if the price is a little lower
View detail
it was the au TORQUE G04 Limit!
High! W!
It's an Aluminum Cut-out, so I don't have a choice..
It can be easily removed, including the arm part, so be careful of theft
the au TORQUE G04 was Limit...Out
0.The protruding part of the black area around the Camera is not thick enough If you don't mind it's really a little bit, it's Large sturdy if you don't mind
View detail
Just right for a goo GRUPixel 3a
I was using the same SYGN HOUSE MountA-44 smartphone, but I was using the same SYGN HOUSE smartphone I just replaced the GOOGLE Pixel 3a with the BodyRight Side phone I replaced it with the latest A-45 because it interfered with the Button and became difficult to use
The A-45 holds One Side at the edge of the Smartmobile Body, so the Pixel3a Exactly In addition, the fingerprint part of the reverse side can be touched without any problems
The overall construction is good and upscale, but the drawback is the high price
View detail
Purchase Repeat
The previous generation had a charging problem after about 3 years of use, and I had to buy the same MODEL again
The first one is KIJIMA's USB Charger (https://www.webike.net/sd/23367011/) I was going to use it, but I saw a review that said my iPhone wouldn't charge, and I was relieved to see that it didn't charge I decided to buy the same MODEL for
USB3.0 from DockConnector to USB3.0 in accessory Cable of iPhone in comparison with the predecessor, but does not seem to change in design and performance Design and performance do not seem to change as much as the accessory Cable changed from DockConnector to USB3.0
Installation was done by connecting it to the front's always-on Accessories power supply
There is no problem with its operation, and iPhone can be charged It seems to be useful when I want to use a GoPro etc. at the same time in the future because the power supply has the maximum 3 places of Charge! It is
Unfortunately, I don't see any improvements to the Rubber that comes with it for installation
I'm not sure it's strong enough, and I don't think it's a great installation method, so I'd like to see some improvements That's where
View detail
If it is a bit cheaper..
Although I was hesitating to exchange because it is a type of car that I get an error when I use bad LEDs but I tried it with a new product.
Although it seems that there is not written a description about the error, since I had a vehicle on the image posted on Manufacturer HP, I thought that Large is durable and purchased.
There was also a counterpart of other Manufacturer, but I was concerned about the appearance and durability of the luminescent part, but I think that the design of this item is good. (Although there is a slightly bad feeling, the Position sphere looks like this)
As a whole there was no error and light quantity was satisfactory product.
View detail
It is as expected
Position was also purchased as LED due to Headlight LEDization.
As described, 6500 K pure white color is familiar with LED Headlight and I am very satisfied..
View detail
Rebuilt as you transfer
I used Power cableKit even in the previous car, but I bought a new Power cable 2 again as I changed transfer. I am asking Shop to install at delivery.
Since there are three power supply ports, I think that there is not much to think when considering the extensibility when buying ActionCam etc. from now on. There is of course not Trouble such as charging failure even if it is used.
Although the performance of the product is satisfied, there is only one unhappy point. That is the fixing method when fixing Body to bar is Elastic band. Rubber deteriorated for less than a year at the time of the preceding car, and it became impossible to fix, so I fixed it with Tie Wrap. As usual it is a fixing method by the Elastic band so we want you to consider another fixing method in the future.
View detail