Reviews
High grip can be caught by Axel in city driving.
Since the Grip is not a perfect circle, I was sometimes caught in the habit of releasing the Grip and putting it back when I hit a traffic light on the street, and I was in a hurry. It is helpful at high speeds on RonTwo. View detail
Thin and snug
I don't know if it's the OEMGrip that's hard or the Position or the vibration, but I'm starting to get pain at the base of my thumb on long distances and I have an extra Point, so I replaced it.
I was thinking about Domino's Turismo, but I still like the slimmer look! But I want earthquake-proof!
So I decided to go this way.
Yes, it fits.
I thought the Size was about the same as the HardGel711 that I am buying Repeat.
It's a quake-resistant Gel, so it feels soft to hold. I am looking forward to seeing how much the pain will be reduced.
I know it says to use Epoxy adhesive for installation, but the grips are too soft and I had a hard time putting them in solidly with Active's Throttle cone.
The Clutch Side was wired without any glue because it was stuck on the Throttle side.
View detail
Rapid wear
I used DAYTONA's PROGRIP for my CBR650F.
This is a replacement from OEMGrip.
Grip prefers Standard to the more eccentric ones that stick out, so we went with this one.
The rubber material is very soft and comfortable to hold. （The rubber is very soft and comfortable to hold.)
On the other hand, it wears very fast, probably due to its softness.
I don't use it much on a daily basis, maybe once or twice a month, but after a little over a year, the surface of the Knurl shape has become thinner and the shreds of rubber, like eraser rubber shavings, are starting to stick to the surface. I think it is worn a little bit every time I use it.
I think that if I go touring once or twice a week, use it for commuting, etc., the wear will increase at an accelerated rate. No Repeat.
View detail
Tight feeling
[How is it used?
Replaced along with Handlebar replacement.
Was the one you received as per Image?
There is no such thing as a Gel to prevent vibration, it is Tight.
Was the installation difficult?
Grip exchange is possible if it can be done.
How was your experience with it?
No problem!
[Included Parts:were they on?
Nothing in particular!
[Was there anything that disappointed you?
Nothing in particular!
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Processing Required
After replacing the handlebar with Other Brand Product, we put on the grip, but the grip was 7mm too long and the hand guard could not be attached, so we cut the end and adjusted it.
I don't think it would have been necessary to cut it if it were an OEM Handlebar.
Light-colored areas will show Black stains after use.
View detail
Goggles with sufficient performance for your needs
[How is it used?
Used in conjunction with Off-Road HelmetVFX-W L
Purchased because my Swan's Talon Goggles were getting old and the Sponge was getting loose in areas that could not be replaced.
Was the one you received as per Image?
It's a safe impression, not too bad, not too bad, not too bad.
Come to think of it, it doesn't seem to fog up.
How was your experience with it?
In the VFX-W LSize, the belt was too short as it was, so we removed the buckle for adjustment.
After removal, it is comfortable with just the right Tension.
[Points to note]
If you use the GogglesFrame without removing the buckle, it will be too tight and may cause damage to the GogglesFrame.
Also, if you use the Goggles in such a way that you raise them up and fix them exactly to the Decoration, they will easily fall into your eyes if you don't raise them up fully.
How did it compare to other products?
Unlike the SwanZtalon Black, I chose the GogglesFrameWhite for this product, so at first glance I thought the field of view would be narrow, but on the contrary it was wide.
Even with expensive Goggles, you can eventually replace the Lens, but not the Frame.
I think these inexpensive Goggles are sufficient for general use.
View detail
In case of Closed end, CRF250L is too short.
When installing on a CRF250LOEM or a closed end throttle tube, the grips are short and there is a gap between them and the switch box.
Also, because it is short, the flange touches the lever when you grip the clutch. In my case, I cut off the point of contact.
I've used it, and my impression is that it's a handful. (around the first joint of the finger) I think that the vibration felt in the "Mere Old Man" is a little less than that of the OEM, but I honestly wonder if it is effective for long hours of touring. ? It is
View detail
even if only a little
I chose MACH because it has a lot of vibration and I wanted to improve it as much as possible.
Do you feel better now?
No, it's good enough if you consider Grip alone.
View detail
Vibration reduction?
I bought the same one as the previous owner was wearing because it was getting sticky with age and I wanted something with vibration reduction for the Grip under the Grip heater. I think it's a good product, but it doesn't reduce vibration for the price. Has the vibration been reduced? I am not sure if it is a good idea or not. There are other vibration-reducing grips that are oval-shaped and thick, so I think it would be better to buy those if your goal is to reduce vibration. I think it is better to buy that one if you are looking for vibration reduction. (This is a friend's story. My friend rides a CT110 HUNTER CUB) I don't mind because I wrap the Grip heater around the top, but I think the design is a little uncool. View detail
Wash for Vehicle products
The representative of the for Off-Road products that are often lost and come out sooner or later.
I bought it because I thought it would be hard to lose it with the prominent color of red and white, and it is safe so far.
View detail
For cloudy or rainy days
Don't consider buying this for sunny days.
[Color] My eyes hurt as much as they did with Clear.
On the other hand, we had good visibility on cloudy and rainy days.
Even if it's cloudy. [Color] Clear is a good choice for people whose eyes hurt after a day of running.
Best of all, it's cheap!
View detail
I can hold Lever firmly.
Lever grip is a pain to install every time.
It's a common method, but I use detergent to install it.
It is Large strange to put the head part in every time, but once it is in, it is Large strong.
However, if you struggle with it too much there, it will dry out and the second half won't glide and you'll end up with a thousand pieces.
However, the grip feeling when gripping the lever is completely different between having this and not having it.
View detail
Fits: その他
It's so thick!
[How is it used?
As for Replace for VANVAN. Because the Pro grip which was attached before was worn out.
Was the one you received as per Image?
The quality of the product is perfect.
Was the installation difficult?
It went in easily with a mist of soapy water.
How was your experience with it?
The outer diameter is a bit thicker than I expected, more like a Harley 1 inch bar. I think it is not suitable for VANVAN. The anti-vibration performance itself is excellent. If you have small hands, this is not for you.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
The outside diameter is too thick. The previous Pro grip was a normal thickness, but this one... I wish they would include the outer diameter in the About section of the product, because it's so different.
I was not expecting the large outer diameter, but the comfort and anti-vibration performance is excellent, so I can push it to those who are looking for such a thing.
View detail
It's neither good nor bad
OEM Product is outdated and replaced.
I bought this because I like the Design, but I would like it to be thicker.
That said, it's naturally more comfortable to grip than the worn-out OEM Product, and it also reduces vibration.
View detail
It is a good item
I've used the same Grip before, and when I replaced the Handlebar
New.
It is resilient and the vibration does not cause hand fatigue.
View detail
I need a little more durability.
I replaced them in the hopes of reducing vibration, but after about 9 months the surface was worn out.
The soft texture was nice to use, but the durability is 1 star.
View detail
That's the Pro grip!
I use it for Harley.
I thought it would ease the vibration, but I wondered if it eased the feeling when driving at high speeds. Level.
However, it seems to be thinner and easier to grip than the OEM.
The drawback is the Gold genus lid of the Bar End section? It is easy to remove it when you click on the Bar End.
Of course, that's not true while driving. LOL!
View detail
My impression is that it's just an ordinary Grip.
It's a grippy, not too much or too little. I guess it's so soft that the beans don't seem to make it.
I haven't run for a long time since I put these on, so it's hard to tell, but in short distances it's pretty normal.
View detail
I think it's something like this.
I replaced it as a vibration countermeasure. It looks better, but it didn't do much to prevent vibration, which is the key factor.
It can be replaced relatively quickly if you use the parts cleaner, Bond was procured from Homsen! But it feels good to use.
View detail
Are you sure it's Goggles compatible with Glasses?
These are Goggles that are compatible with Glasses, but the width is narrow and it presses the Glasses considerably
In addition, the Band's tightness makes the nose pad bite into your face
Goggles aren't suitable for glasses in the first place...
By the way, you won't get into SHOEI's HORNETADV
Technically, you can force your way in, but it's impossible to wear the glasses The glasses will break
View detail