KIJIMA Motorcycle Reviews - Webike Thailand

Filter

Write a review and get Webike Points!

Reviews

KIJIMA Clear all

KIJIMA

22 Feb 2024

Power Air Cleaner

Fits: YAMAHA SR400, YAMAHA Cerro 250, YAMAHA TW200, YAMAHA TW225E, YAMAHA SR400, YAMAHA Cerro 250, YAMAHA TW200, YAMAHA TW225E

Japanese Webike user

5/5

Cost and Performance

Power Filter, the standard Tune for intake and exhaust, Powerful.
The Power Filter makes the air flow smoother and provides air without stress to the throttle work, making the engine more responsive and increasing torque and power.
Throttle response when opening the axel has also been improved, and you will be surprised at the difference in the comfortable start.

Setting the carburetor and injector is essential for installation. After the carburetor and injector are installed, the power of the carburetor and injector can be experienced, but there are also Merit and Demerit.

Merit to be replaced by Power Filter
[Merit1] Power up The shorter the intake pipe is and the rougher the filter is, the more air resistance can be reduced by replacing it with an air cleaner. 。 Most OEM filters that use filter paper, etc., have low airflow per area and large intake resistance, whereas the mesh Power Filter has much lower intake resistance. 。 When the intake resistance is reduced, the negative pressure resistance when the piston is lowered during the engine intake process is also reduced, so both power and response can be increased. 。 The higher the RPM, the more air intake per hour, the larger the benefit will be, and as long as the fuel condition is well controlled, the power can be increased by replacing the power filter. 。

[Merit2 Sound change The Merit of replacing with the Power Filter is that the intake sound becomes easier to hear. 。 Normal air cleaner box is designed to reduce intake noise, so intake noise is barely audible 。 The bare power filter directly emits the sound of the engine intake, and this alone creates a sporty atmosphere. 。

[Merit3 Space-saving By eliminating the air cleaner box, which occupies a large volume of space in the motorcycle, the available space can be effectively utilized. In addition, it contributes to weight reduction. 。 Mopeds with less loading Space can increase their loading capacity, albeit slightly, by installing an Accessory Case! 。

It seems to be a Power Filter full of good things, but there is also this Demerit.

Power Filter Demerit

[Demerit1] When replacing the noisy Power Filter, not only the intake sound but also the blasting sound of the Engine and even the Mechanical Noise can be heard.
The air cleaner also serves as a silencer, and replacing it with a power filter will significantly reduce the silencing performance of the intake system, etc., so when the RPM is increased, the noise may be greater than the exhaust noise. 。 I like it (laughs).

[Demerit2] Low-speed Torque becomes thinner and harder to ride. 。 The Power Filter and direct carburetor certainly increase power by reducing intake resistance, but precisely this is only the result of the TorqueBand shifting to a higher RPM side. Therefore, the starting acceleration may seem weak, or the TorqueBand may lack the feeling of Torque when the Throttle is slightly opened, and the motorcycle may become difficult to handle.

[Demerit3] If the Power Filter has a nipple to install the blowby hose, there is no problem if the hose can be inserted there. However, it is illegal to release the blowby gas discharged from the engine to the large airflow because there is no installation point for a blowby hose. 。 Blowby gas is sucked out by the negative pressure of the intake air and is discharged because the replacement of the Power Filter or opening of the large air intake does not provide enough negative pressure as the OEMAir cleaner box does, and blowby gas cannot be sucked out as efficiently, The increase in the internal pressure of the engine crankcase prevents the piston from moving, resulting in power loss. 。 While replacing with a power filter will increase power by reducing intake resistance, it may also cause power loss by reducing blowby gas discharge efficiency.

Based on Merit and Demerit, I purchased KIJIMA's Power Filter this time, and it is not bad relatively speaking. In a word... it runs well (with Carburetor setting).

good point
◎Filter capacity, well treated joints, and durable performance.

◎Cheaper than K&N.

After Fire will not appear.

A bad point
◎ Cannot be used on rainy days. →Because it absorbs water.

◎Intake noise became annoying.

◎Carburetor setting is required.

◎Engine characteristics become closer to high rpm. →If I say that it has come to revolve, it does (laughs).

◎Cleaning will be necessary for the blisters.

Some people do not have the Merit to install the Power Filter from Demerit, but it depends on how you use it and the form you want to use it in.
The purpose is to set the intake and exhaust to match the current running conditions. 。 In such cases, we think the Power Filter is a logical part. View detail

KIJIMA

20 Feb 2024

LED Taillight Kit

Fits: HONDA SUPER CUB 50PRO, HONDA SUPER CUB 50, HONDA CROSS CUB50, HONDA SUPER CUB110PRO, HONDA SUPER CUB110, HONDA CROSSCUB110, HONDA SUPER CUB110, HONDA CROSSCUB110

NO NAME

3/5

Does not fit 23 year old JA56 products

I ordered several parts from We Bike and installed the ones that fit.
Surprisingly, there are too many incompatible parts.
It does not fit the JA56 model, which is an officially imported product from Korea.
Machining is required when installing. Please keep this in mind when purchasing from Korea.
-------------------------------------------------- -------- We are ordered by ordering various parts from Webike, but there are too many parts that are unexpectedly compatible. It is not suitable for the JA56 model, the official imported product of Korea. When mounted, processing is required. Please refer to the purchase of Koreans. Powered by Google Translator View detail

Grip Heater GH10 with Built-In Switch Grip Length 120mm

KIJIMA

14 Feb 2024

Grip Heater GH10 with Built-In Switch Grip Length 120mm

Fits: HONDA SH125, HONDA NX250, HONDA XR650L, HONDA LEAD125, HONDA XR250L, HONDA CBR900RE, HONDA DIO110, HONDA CRF230M, HONDA CBR900RR, HONDA CRF230L, HONDA CB900F, KAWASAKI Z1000, HONDA CB600F, HONDA CB1300 SUPER FOUR, HONDA Spacy110, YAMAHA YZF-R3, YAMAHA XMAX300, YAMAHA NMAX155, HONDA Forza300, HONDA CB150R

Japanese Webike user

4/5

Useful for cold season commuting

[How is it used?
installed
Was the one you received as per Image?
Grip is Slim and good.
Was the installation difficult?
Left Side Grip is difficult to install. How do we get there?" I struggled with it for about 15 minutes. I hit it with a board and tapped it in with a plastic hammer, but the Motorcycle shop advised me not to do it as much as possible because it could be damaged.
How was your experience with it?
The product Single Body is warm, but it is even more effective if you use Knuckle guard, Cover, or other devices to protect it from the driving wind.
[Included Parts:were they on?
Everything was in place.
[Was there anything that disappointed you?
Sufficient performance is not a problem. View detail

KIJIMA

14 Feb 2024

Mount Bar Bracket

Fits: HONDA SUPER CUB 110

Japanese Webike user

4/5

Good to use with Windshield.

[How is it used?
SUPER CUB110 has a Handlebar covered by a Cover, so a Smartphone Holderretc. cannot be attached as it is, so it is used to make a place for the Handlebar.
(I guess you could put it on Mirror if you don't use Windshield)

Was the one you received as per Image?
The color and texture are as per Image. I thought it was quite heavy, but it is better than chubby.

Was the installation difficult?
Before installation, it was necessary to remove the body of the WindshieldCUB-F3, which was already attached to the Motorcycle. Also, the four screws originally attached to the Motorcycle were tightened so tightly that it was a little difficult to remove them. I bought my Motorcycle only four months ago, so it might be better.
When I first installed it, there was almost no gap between the lower part of the Windshield and the Shield (see the first photo), and I was worried that if I drove with the Shield in place, there would be contact between the two on bumps and noise would be heard. After changing the position of the Bolt and Bracket of the Shield, I was able to open a gap where there is no contact and there is no noise.

How was your experience with it?
The KaEdia KDR-M28 Smartphone Holder is attached. The thickness of the bar is 22.2mm, and the clamp of KaEdia is 22.0mm (when Attachment is attached), but I was able to attach it.
I used it for about a week and went touring twice during that time, about 2 hours each way, and had no problems with it coming loose.

[Included Parts:were they on?
You need to prepare your own tool to tighten the Hexagon Bolt. I used the one that came with the for Motorcycle portable tool.

[Was there anything that disappointed you?
None in particular

Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Nothing in particular, since I wrote most of it above. If I had to say something, I would say that the price is too high for a Mount Bar Bracket, but I don't want the quality to be lowered, so maybe this is okay. View detail

Foot Shaped Brake Pedal Cover for Grom / Monkey / DAX

KIJIMA

09 Feb 2024

Oil Resistant Hose

Fits: Others

Japanese Webike user

5/5

For those who feel more comfortable seeing what's inside.

[How is it used?
I purchased this product to refresh the hose around the fuel cock and carburetor of a vehicle I have owned for many years, as they have begun to harden over time, while keeping costs down.
Thanks to the fact that the same parts were used in vehicles up until recently, OEM parts are available for hoses, but they are a bit expensive, and the price is a bit high. CostCut" "Where commercial products can be used, CostCut uses commercial products." So I checked Webike and found that KIJIMA's Hose was cheaper this time, so I bought it.
Was the one you received as per Image?
The familiar Clear pink Fuel Hose, a supple and flexible Fuel hose, which is natural since it is brand new.
Incidentally, the OEM fuel hose we had been using up until now had no cracks, but it had deteriorated over time and was in a bad shape, making us glad we replaced it.
How was your experience with it?
We replaced the above-mentioned CaChicatiHose with this flexible product and everything is better.
The part used is a Carburetor drain hose, and the new one is good.
[Points to note]
Several different sizes of HoseLineup are available in the same package, so be sure to check the inside diameter of the hose you want to replace and order the size that fits.
How did it compare to other products?
I have only used KITACO and KIJIMA products, but I think they are both similar products and there is no problem no matter which one you buy.
I feel that the pink clear type fuel hose hardens a little faster than the black rubber hose, etc. If you do not neglect daily maintenance, there is no problem, but for a lazy person like me, it is better to check it once a year or so. I felt it would be better for a lazy person like me to check it once a year.
Other items that would be helpful
Point and hang of installation
I am not sure if I am doing it the right way, but if I apply a small amount of silicon grease during installation and insert it into the cook, it works Smoothly.
As a matter of course, let's pass the Clip through the hose first before jointing the hose.
The most Large-picture work may be to insert it firmly and prevent it from coming loose with a firm hose band.
[ITEMS TO BUY TOGETHER
The inside diameter of the hose from the fuel cock and the hose around the carburetor may be different, so be sure to check the inside diameter of the hose that was originally installed before purchasing the appropriate product.
If the Fuel Hose is replaced with a new one, it may be better to purchase a new Hose clip (Hose Band) as well, considering its deterioration over time.
[Opinions and requests to Manufacturer
Please continue to sell this product as long as possible, as it is necessary to replace the fuel hose on older motorcycles. View detail