Reviews
Fits: YAMAHA XSR900, YAMAHA MT-09 SP, YAMAHA MT-09
Dissatisfied
I purchased this product to prevent Small scratches.
It floats from the edges, either because the size is not right or the adhesion is weak.
After pasting, Meter was difficult to see.
After a few Touring, I felt that Small scratches were better and removed them.
View detail
Easy to use
There were not many options available for the GSX-S1000GT, but I am satisfied with the product. It is easy to adjust.
The shape of the Lever is common, but I personally would have liked the cross section to be more rounded for easier gripping.
View detail
Fits: SUZUKI GSX-S1000, YAMAHA YZF-R6, YAMAHA YZF-R1S, YAMAHA YZF-R1, KAWASAKI Ninja ZX-6R, BMW S1000RR, BMW S1000R, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-S1000F, YAMAHA YZF-R1M, SUZUKI GSX-R1000R, KAWASAKI Ninja ZX-25R, KAWASAKI Z650RS, SUZUKI GSX-S1000GT, KAWASAKI Ninja ZX-4R SE, KAWASAKI Ninja ZX-4R RR, SUZUKI GSX-R1000, SUZUKI KATANA
appearance
It is almost all about looks. Installation is easy, but be sure to follow the tightening Torque. View detail
The classic European Blinker
This is a replacement for an OEM Blinker. I am satisfied with the stylish look. View detail
Fits: HONDA CB400SF VTEC, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR REVO, HONDA CB400SF VTEC REVO
Mounted on NC39
I am satisfied with the OEM color, so there is no sense of discomfort after installation.
Since the paint can be scratched off by stepping stones while driving, it is a good idea to put a protection film or the like on the front end of the car so that you can go touring with peace of mind.
View detail
Reliable Filter
I bought it two years ago and this is the second time. It was not badly stained,
Replaced to prevent carburetor clogging.
It has magnets on it so it will remove rust, etc.
View detail
Yoshimura Bling
I ecpected this to be just another keyring. It is but with Yoshimura quality even down to the packaging its A*. Now I've got rid of the dealer keyring and replaced with this elite keyring. Made from premium materials. Embossed on both sides as well. The actual ring is very rigid and needed quite some effort to mount it to the bike key View detail
Easy upgrade
This item is high quality and is very easy to fit. Its a must to get rid of the restrictive stock air filter with a small surface area and this is a easy cost effective solution. Very well made and low maintenance View detail
A tech under cowl
I ordered this for my 2023 z125. It fits perfectly. Really makes it stand out from the stock look. Love the product. Highly recommend to anyone that's interested. View detail
It's good to have the self-satisfaction of using BremboOEM's Titaniumium pad pin.
[How is it used?
After many years of use, the Coe?? Stainless Steel Pad Pin was experiencing paint peeling due to friction and color change due to baking.
Therefore, we replaced it with this Titaniumium pad pin, which is a Brembo OEM part.
My vehicle has been replaced with NorthLine caliper support, BremboRacing caliper, ZCOO brake pads, and BRAKING 320mm brake rotor.
Was the one you received as per Image?
The dull shine of Titanium was more luxurious than the Image in the picture.
The Brembo is a little lighter than the Brembo. The Brembo is lighter than the Brembo in terms of weight.
Was the installation difficult?
It was not difficult.
Even amateurs can replace them if they have Pliers.
How was your experience with it?
I honestly don't know since the weight reduction is in tens of Grams?
It is good because I can indulge in the self-satisfaction of using Titanium.
[Included Parts:were they on?
Clip to stop Pad pin is included.
(It is in the attached image.)
[Was there anything that disappointed you?
I was not disappointed. I did not expect the weight reduction due to the fact that the parts are small in size.
Installation Point or hang
Tension Spring Tools allow for easy removal and installation without scratching.
Availability and clarity of Instruction Manual
Instruction Manual is not included. It is not a complex component that should be included.
important point
It would be good if you do not neglect to visually check and test run the Clip to make sure it is inserted securely.
Items to buy together
As mentioned above, Tension Spring Tools.
Opinions and requests to Manufacturer
Not particularly
View detail
Design is good, but... It didn't help me prevent buttock pain.
I was looking for a Seat with the primary purpose of preventing OEMSeat buttock pain.
It is a personal feeling, but the conclusion is that it has no effect on preventing buttock pain.
On the contrary, my butt hurt faster than OEM.
The OEM could sit for an hour to an hour and a half, or about 100 km in distance, without discomfort, but with this Seat, by the time an hour passed, I felt discomfort in my buttocks, which soon turned into pain.
Please note that the sensation varies from person to person and is for reference only.
I think the design looks good and the quality of the product is good.
The impression is hard, as you cannot tell by touch if there is any Gel in it.
No change in footing was felt for the 20mm ankle extractor.
What I was looking for was a soft and absorbent Seat, so it is the exact opposite.
I will consider other Seat after using it a little more.
Point that I decided to purchase this time
Price, with Gel, Tuck roll, 20mm Anko (bean paste)
My greatest expectation was for a Gel, but I was disappointed.
(What kind of Gel is in it?)
The effect of footing improvement by 20mm Anko removal is unknown.
Tuck roll design is GOOD.
It would have been a great cosmetic product at this price if it eliminated the buttock pain, but alas.
View detail
Fits: KAWASAKI GPZ900R, KAWASAKI GPZ750R-900R, KAWASAKI GPZ750R
Ideal for Wound and Crack Hiding
Material of this Manufacturer:This was my first purchase of Carbon products and I am very satisfied with the quality.
First of all, it may be a bad point, or perhaps it is unavoidable due to the nature of the material, but you should not expect the fitting to fit the side cover exactly as if it were OEM.
It's not bad, but when you match one point of chili to another point of chili, the other point may not match, or there are parts where there is inevitably a gap when laminating with Double-sided Tape, … Level is not a concern if you move a little away from the car body.
The first good point is that it looks cool.
This is the best way to hide NINJA's unique side cover cracks.
Our Side cover also had a cracked One Side, but it was hidden by Beauty.
The Instruction Manual was also in color and the content was very clear and helpful.
And the warranty is generous even for such a small product!
De Fault comes with a one-year warranty, which shows A-TECH's commitment to manufacturing.
In the future, if Material:I wanted to make A-TECH my first choice when looking for Carbon products.
View detail
Wide MotorcycleBoots
I have a wide foot and usually wear 4E-5E, but I was having trouble finding wide MotorcycleBoots. But the width was still too tight, so I used my ShoeKeeper to widen the part of the boot that hits the foot. Also, because I made them one size too large, I had some soreness on my heel, but I put a commercially available support pad on it to make it fit. I am now using them mainly for short distance touring. I have extremely wide feet, so it can't be helped, but I am grateful to WildeWing for providing me with wide 4ESize MotorcycleBoots. I will take my time to acclimate them in the future. View detail
The uses are unlimitedLarge!
I used it to secure the sub-computer on my Ninja 250SL, but I had some left over so I used it on the screen door of my front door! The adhesive is strong and does not come off, yet it is easy to put on and take off! This is really convenient! I think it can be used anywhere as long as it does not get wet! It is easy to install because you just need to remove the grease and stick it on! It is the most convenient product! View detail
Fits: Others , YAMAHA Tracer900, DUCATI SS900, SUZUKI DL1000 V-STROM1050, SUZUKI DL1000 V-STROM650, SUZUKI V STROM250SX
Good, including storage when not in use.
Installation was easy and stable.
Back Cover had to be bunted to keep it loose or the Cover would flop around a bit while driving!
Even the slop on the bottom of the Back was removed with a quick wear!
When stored, it flattens out to save space.
View detail
At One point.
OEM Product quality is a must.
I don't think you will see this in FOR JAPAN MODELSEA BASS
View detail
First SMARTDisplay
[How is it used?
Used for city driving and touring.
I use it with Apple CarPlay.
Was the one you received as per Image?
In fact, when you hold it in your hand, it is surprisingly small.
The screen size is 5-inches, which is almost the same size as X-ADV's Meter.
Was the installation difficult?
It was easy to install as it can be powered from a USB port.
Wiring from Battery is also possible.
How was your experience with it?
I am still using it only for city driving, so I wonder if it is convenient? I am not sure if it is useful or not.
Is the Navigation screen easier to see?
[Included Parts:were they on?
The Mount in Included Parts:was easy to install.
A simple instruction manual is included.
Download the PDFFile from Kijima's website for connection and use.
[Was there anything that disappointed you?
We are not yet in full operation. "Honestly, is this how it's going to be?" That's my impression.
It may be due to my usage environment, but sometimes the music gets cut off or I can't hear it.
The connection method is called Smartphone&arrarr;SMARTDisplay&arr;Income, but I can't grasp where the cause is.
I'm using IncomeB+COM SB6X, but I'm not experiencing any interruption in SMARTDisplay and Pairing, so I'm going to wait and see how it goes a bit more.
【Review】
I chose Kijima's Display considering AfterCare and FOR JAPAN MODEL certification because it is sold by JapanManufacturer, although products with the same spec. are sold at a lower price.
Price-wise, the same type of product without KijimaLogo would be considerably cheaper.
It does not have air pressure management or DreEveRecorder like other companies' products, but it may be worth buying if the display alone is sufficient for your needs.
I'm worried about my phone running out of heat in the coming season, so I'm looking forward to seeing how long I can use it.
View detail
Fits: KAWASAKI ZX-14, KAWASAKI ZX-14R, KAWASAKI ZZR1400
I changed the look to a more modern look.
After 9 years of purchase, I changed the Blinker from Orange bulb to LED + Clear cover to match the LED + Clear cover of the Tail lamp. The price is a bit expensive at 10,000 yen, but it comes with Relay, so I guess that's about the same.
when Blinker is not attached. [Color] Clear is clean and Refreshing and I am satisfied with the aim.
ZX14R is very troublesome because the cowl has to be removed from both Front and Rear to replace the blinker valve, but I am used to this after installing other parts many times, so I can forgive it. (Plug replacement is the real work from here, and it is a very large change.)
It might be a bit challenging for someone removing Cowl for the first time?
It was worth the effort to replace it.
View detail
Not available for 2023GROM
I purchased this product because it was indicated that it could be installed on a 2023 GROM, but the type of the Air Cleaner Box has changed from the previous model and it cannot be installed immediately.
There is an intake on the Engine side at the far end, which is inaccessible. It might be possible to install the unit if all the ducts were loosened and removed, but I decided not to do so because it would take too much time.
It was a waste of time, so I installed it in the intake of the box in front of the Air Filter.
Does it seem to be effective from where it is installed? Or not?
I would like to believe that there is.
View detail
Tuck roll
I drove about 300km and I wished I had bought it earlier because it didn't hurt my butt so much and looked better than the OEMOPHigh seat.
Seat back is also almost like OEMSeat, inside front side. (where Gel Zab and Sponge are located) The "Seat" is also waterproof, which I thought was well thought out. A tool was also attached to the back.
When installing it, it feels a little too snug and a little tight.
(Archi, it's in long tail).
I had a hard time putting on the Tandem belt by myself… I have a grip strength of about 52kg, but it was tough to fix the bolt while pulling it.
View detail