Reviews
Fits: YAMAHA AXIS 90, YAMAHA JOG90
Is it the best of what is available?
The screw is installed with a slight twist because there is no grommet and the accuracy is not very good. Also, depending on the fit of the shroud on the engine side, it may be necessary to cut the part where the oil hose passes through, or some other modification may be necessary.:I think Carbon Style is beautiful, and although there are two other products for 3WF available on the international Site, I think it is the best product available as new with manageable and acceptable accuracy. View detail
![AluminumCNCMission drainBolt[Yamaha vehicles].](https://img.webike-cdn.net/catalogue/images/47705/kn-ymdb-rd_01_TS.jpg)
Fits: YAMAHA Axis Treat, YAMAHA CYGNUSZ, YAMAHA BWS125, YAMAHA CYGNUS X, YAMAHA BWS100, YAMAHA GRAND AXIS, YAMAHA GEAR, YAMAHA VOX, YAMAHA VINO, YAMAHA CHAMP, YAMAHA Horizontal TypeJOG50, YAMAHA Active, YAMAHA BJ, YAMAHA JOG APRIO, YAMAHA AXIS 90, YAMAHA AXIS 50, YAMAHA Horizontal TypeJOG90, YAMAHA Horizontal TypeJOG50, YAMAHA Vertical TypeJOG80, YAMAHA Vertical TypeJOG50
Accessory parts are usually invisible.
I wanted orange color, but there is no setting. By the way, the oil cap side has a setting of orange color, but be careful when tightening it because it is aluminum. View detail
No problems
I don't think there is any problem. There is no problem with functionality, but the Cut is a little rough in some areas. View detail
![8, Final Gear Kit [Primary Side + Secondary Side / 13 x 48 + 15 x 32] JOG90 / AXIS90](https://img.webike-cdn.net/catalogue/14762/05180157_5196618a725d0_TS.jpg)
Fits: YAMAHA AXIS90, YAMAHA JOG90
Primary shaft is slightly shorter
This quantity is designed to be used both as a slightly low geared primary/secondary simultaneous replacement and as a slightly high geared secondary only replacement.:The primary shaft seems to have been used for another car model, so the shaft is a little short. It may be possible to slightly reduce the amount of press fitting on the Bearing on the Cover side to increase the amount of shaft applied to the Bearing. View detail
Fits: YAMAHA JOG90, YAMAHA Axis 90, YAMAHA JOG80, YAMAHA JOG-Sports, YAMAHA CHAMP80, YAMAHA Target RS90, YAMAHA Excel, YAMAHA Active, YAMAHA BOXN, YAMAHA JOG, YAMAHA CHAMP, YAMAHA CHAMP RS, YAMAHA SUPER JOG ZR, YAMAHA JOG, YAMAHA APRIO, YAMAHA APRIO type2, YAMAHA APRIOEX, YAMAHA JOG, YAMAHA JOG-Sports, YAMAHA VINO
High turnover type, my favorite.
Even with the additional weight, the gearshift is still very high rpm. I like it because it is Exactly for my current engine characteristics. View detail
Fits: SUZUKI OB50E, SUZUKI love, YAMAHA Axis 50, YAMAHA Axis 50, YAMAHA Axis 90, YAMAHA Excel, YAMAHA gear, YAMAHA gear, YAMAHA gear, YAMAHA champ, YAMAHA try, YAMAHA Grand Axis, YAMAHA Super Jog ZR, SUZUKI GN50E, SUZUKI RG50γ, SUZUKI TS50HUSTLER, SUZUKI ADDRESSV125, SUZUKI WOLF50, SUZUKI CARNA, SUZUKI Shot
perfect fitting!
It was used to restore and refit mufflers I like the perfect fit. The material was good. I want to recommend it. thank you. View detail
Fits: HONDA Dio ZX (Dio), HONDA Dio SR (Dio), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA Sh mode (MODE), HONDA PRESS CUB 50 STD (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 DX (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PCX150 <ABS>., HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA PCX Special Edition, YAMAHA Vino (VINO), YAMAHA Zr SUPER JOG (SUPER JOG), HONDA GROM
NTB Gasket
I was looking for an inexpensive Exhaust Gasket and saw this and bought it. View detail
Fits: YAMAHA Super JOG Z, YAMAHA 7PS JOG Z, YAMAHA Met Inn JOG, YAMAHA Met Inn JOG Sports, YAMAHA Vino, YAMAHA AXIS90 All years, YAMAHA JOG90 90-97, YAMAHA 7PS JOG 91-92, YAMAHA JOG Z 90, YAMAHA Aplio (4JP5), YAMAHA Aplio (4JP7), YAMAHA Aplio (4JP8), YAMAHA Aprio II (4LV3), YAMAHA AXIS90 All years, YAMAHA JOG90 90-97, YAMAHA 7PS JOG 91-92, YAMAHA JOG Z 90, YAMAHA Aplio (4JP5), YAMAHA Aplio (4JP7), YAMAHA Aplio (4JP8)
Not sure how it differs from OEMFilter.
I put it on for a test because it is compatible with the OEM Air Filter.
I heard that it is best to raise the main jet about 5 positions, but I did not change the jet for the time being.
I have replaced the air cleaner box intake with KN Planning's Universal Product, so I think I am getting more air than with the NORMAL filter, but I am not sure of the difference with the Normal filter.
The fuel should be somewhat thin, but I'll ride it some more and see how it goes and check it with Plug burnout.
View detail
Fits: HONDA Dio ZX (Dio), HONDA Dio SR (Dio), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA Sh mode (MODE), HONDA PRESS CUB 50 STD (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PRESS CUB 50 DX (CUB PRESS), HONDA PRESS CUB 50 (CUB PRESS), HONDA PCX150 <ABS>., HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA PCX Special Edition, YAMAHA Vino (VINO), YAMAHA Zr SUPER JOG (SUPER JOG), HONDA GROM
NTBGasket
I purchased this product to install MORIWAKIShortMONSTER S2.
I think the costumes are good
View detail
Fits: YAMAHA JOG90, YAMAHA JOG, YAMAHA AXIS 90, YAMAHA AXIS 50, YAMAHA JOG ZS 3YK1-B YG50Z|ZS|EX|Zr, YAMAHA JOG Z, YAMAHA JOG Zr, YAMAHA JOG APRIO Type 2, YAMAHA MAJESTY125, YAMAHA JOG ZS 3YK1-B [Fitting Information] YG50Z|ZS|EX|ZR, YAMAHA Majesty 125, YAMAHA Axis 50, YAMAHA Axis 90, YAMAHA jog, YAMAHA Jog 90, YAMAHA Jog Z, YAMAHA Jog ZR, YAMAHA Jog Aprio Type 2
It purchased as an object for exchange of a grand axis. Purer [ black ] on a photograph. The bottom is a purchase. Although attachment is OK, die length is a little short. Since there was nothing in a conformity vehicle type, it is natural
It purchased as an object for exchange of a grand axis.
Purer [ black ] on a photograph.
The bottom is a purchase.
Although attachment is OK, die length is a little short.
Since there was nothing in a conformity vehicle type, it is natural.
Since the hand is small, my furniture is good.
I also want the left.
View detail
Fits: YAMAHA vino, YAMAHA JOG Z, YAMAHA JOG Z, YAMAHA JOG90, YAMAHA JOG90, YAMAHA JOG90, YAMAHA JOG90, YAMAHA JOG90, YAMAHA JOG (2Cycle), YAMAHA JOG (2Cycle), YAMAHA APRIO, YAMAHA AXIS 90, YAMAHA AXIS 90, YAMAHA AXIS 90, YAMAHA AXIS 90, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA JOG ZS[YG50ZS] 1992
Although the bolt of normal was a plus screw, in adjusting a weight roller etc. frequently, the screw tended to be licked immediately. After exchanging for this bolt set, the electric torque driver could be equipped with a long 5-mm hexagon, the case
Although the bolt of normal was a plus screw, in adjusting a weight roller etc. frequently, the screw tended to be licked immediately.
After exchanging for this bolt set, the electric torque driver could be equipped with a long 5-mm hexagon, the case could be removed immediately, and setting also became very easy.
Moreover, plating is playing a role also in texture.
Those who make desorption of a pulley case frequent also think that they are the optimal goods also for the direction to dress up.
It is recommended!
View detail
Defective item
The molding of the product is poor, and even when the lid of the box is closed, there is a gap, so the air intake leaks, making the product noisy and unusable. View detail
Fits: YAMAHA JOG, YAMAHA VINO, YAMAHA AXIS 90, YAMAHA GRAND AXIS, YAMAHA SUPER JOG ZR, YAMAHA BJ, YAMAHA BWS100(BWS), YAMAHA BWS50, YAMAHA APRIO, YAMAHA JOG, YAMAHA JOG, YAMAHA JOG90, YAMAHA JOGC, YAMAHA YV50 Z II, YAMAHA JOG Zr, YAMAHA SUPER JOGZ, YAMAHA VINO(2Cycle), YAMAHA Remote controller jogZr
Not very effective in Normal spring.
Used in 4jp5APRIO
I was considering whether to use a stiffer center spring when I remembered this product, so I purchased it.
I thought that if I put the BearingSlider in before stiffening the Sensep, I would be able to apply a little more load to the Spring than in the OEM condition.
I'm not sure how effective it is, but I think it will be useful when I replace the Sensep and make it harder, because I think it will absorb the twisting.
As for the quality and texture, well, there is a slight BALI on the processed finish, so I lightly removed the BALI with sandpaper before injuring my hand.
The precision of the ball in the Slide section was also gurgling when turned by hand with load, so I put a few drops of Bell Hammer Gold on it and turned it by hand until it became accustomed to it.
The gurgling feeling is almost gone, but I think it is better to degrease the oil thoroughly before assembling because it may fly out.
I don't think it is necessary to add oil to the parts since they are not usually high-revving parts.
View detail
Fits: YAMAHA BWS (Bewith), YAMAHA BWS (Bewith), YAMAHA Apprio, YAMAHA Apprio, YAMAHA Apprio, YAMAHA gear, YAMAHA jog, YAMAHA Jog (2 cycle), YAMAHA Jog (2 cycle), YAMAHA Jog (2 cycle), YAMAHA Jog (2 cycle), YAMAHA Jog (2 cycle), YAMAHA Jog (2 cycle), YAMAHA Jog ZII, YAMAHA Jog ZII, YAMAHA jogpochet, YAMAHA jogpochet, YAMAHA jogpochet, YAMAHA Super Jog ZR, YAMAHA vino
0.It's a product for determining RollerSetting in 25g increments.
I was looking for a roller with 0.25g increments to fill a Weight RollerSetting and found this product.
5.0g×3 pieces 4.5g×I was running with 3 Settings, but I wanted to go a little heavier, so I changed 4.5g to 4.75g.
Scooter is fun to use, even with a total 0.75g increase, it changes the way it runs!
Durability has not been tested yet, but it would be great if it doesn't wear out as much as OEM.
View detail
Fits: SUZUKI birdie, YAMAHA jog, YAMAHA jog, YAMAHA jog, YAMAHA jog, YAMAHA jog, YAMAHA jog, YAMAHA jog, YAMAHA Cygnus, YAMAHA Cygnus, HONDA APE 50, HONDA GORILLA, HONDA SUPER CUB 50 (AA04), KAWASAKI KDX125/SR, KAWASAKI KDX250SR, SUZUKI LETSG, SUZUKI LETS4, SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI ADDRESS V100
A little darker, but brighter than NORMAL!
[How is it used?
Normal headlight was dark and to replace it with a brighter one, we purchased this Valve, which was inexpensive and had good reviews.
How was your experience with it?
It was not as bright as expected, but it was brighter than NORMAL, so that was good.
How did it compare to other products?
If you are looking for brightness, we recommend switching to expensive LED Type or H4Type from other companies.
[Points to note]
It would be better to replace it without much expectation.
▼Blue color reflection on the Reflector improves the appearance of Parenthesis.
View detail
Fits: KAWASAKI AR50/S, KAWASAKI KS-1, KAWASAKI KS-2, SUZUKI ADDRESS110, SUZUKI STREET MAGIC, SUZUKI STREET MAGIC 110, SUZUKI LETS L Combination brakes(CA1KA all models), SUZUKI LETS L Combination brakes (CA1PA all models), SUZUKI LETS ZZ (CA1PB ), SUZUKI LETS Combination brakes(CA1KA all models), SUZUKI LETS Combination brakes (All CA1PA models), SUZUKI LETS II (2Cycle), SUZUKI LETSG, SUZUKI VERDE, YAMAHA BWS100(BWS), YAMAHA DT50, YAMAHA RX50, YAMAHA RZ50, YAMAHA TDR50, YAMAHA YSR50
Engine response increased.
I wrote this last time, but I would like to add.
Used on APRIO4jp5 Lead Valve and replaced with OEM.
The OEM Lead Valve is a Stainless Steel plate, but this Material:By switching to Carbon, the intake resistance of the Piston is reduced compared to the OEM, and more air mixture can be sucked in.
As a result, the engine revved up immediately after starting from a standstill, and we were able to experience an increase in response.
I think it is a good part to consider when reviewing the intake and exhaust.
View detail
Fits: YAMAHA Super JOG [Jog] ZR 3YK1-A, YAMAHA Super JOG [Jog] ZR 3YK1-9, YAMAHA Super JOG Z 3YK1-A, YAMAHA Super JOG [Jog] Z 3YK1-9, YAMAHA VINO [Vino] 5AU1-8, YAMAHA JOG 90 [JOG] 3WF All models, YAMAHA JOG [JOG] Sport 3RY All models, YAMAHA JOG [JOG] Z, YAMAHA JOG [Jog] Z 3RY All models, YAMAHA JOG [JOG] EX, YAMAHA JOG (JOG) 3YJ All models, YAMAHA JOG [JOG] 3KJ All models, YAMAHA AXIS 90 [AXIS] Profoot 3VR All models, YAMAHA AXIS 90 [AXIS] 3VR All models, YAMAHA AXIS [AXIS] Profoot 3VP All models, YAMAHA AXIS [AXIS] 3VP All models, YAMAHA APRIO [APRIO] type 2 4LV3, YAMAHA APRIO [APRIO] EX 4LV3, YAMAHA APRIO [APRIO] 4JP8, YAMAHA APRIO [APRIO] 4JP7
Air cleaner replacement
My wife bought a 1998 jogAPRIO4JP 24 years ago when she was single, and it has been running very well and we have not changed the air cleaner in 5 years. I will continue to maintain it Large and Diligent. View detail
Fits: YAMAHA Super JOG Z, YAMAHA 7PS JOG Z, YAMAHA Met Inn JOG, YAMAHA Met Inn JOG Sports, YAMAHA Vino, YAMAHA AXIS90 All years, YAMAHA JOG90 90-97, YAMAHA 7PS JOG 91-92, YAMAHA JOG Z 90, YAMAHA Aplio (4JP5), YAMAHA Aplio (4JP7), YAMAHA Aplio (4JP8), YAMAHA Aprio II (4LV3), YAMAHA AXIS90 All years, YAMAHA JOG90 90-97, YAMAHA 7PS JOG 91-92, YAMAHA JOG Z 90, YAMAHA Aplio (4JP5), YAMAHA Aplio (4JP7), YAMAHA Aplio (4JP8)
AXIS 90
I would say it is neither good nor bad.
I don't think the service life is very long. It is advisable to inspect it once a year. If left unchecked, the sponges will become worn out and cause problems with the carburetor or other equipment. It is a product that is readily available, so I think it is good for those who inspect it frequently.
View detail
Fits: YAMAHA Zr SUPER JOG (SUPER JOG), YAMAHA Vino (VINO), YAMAHA Vino (VINO), YAMAHA Vino (VINO), YAMAHA TW200E, YAMAHA TW200, YAMAHA TW200, YAMAHA TW200, YAMAHA Town mate 80 (TOWN MATE), YAMAHA Town mate 80 (TOWN MATE), YAMAHA Town mate (TOWN MATE), YAMAHA Town mate (TOWN MATE), YAMAHA Town mate (TOWN MATE), YAMAHA SR125, YAMAHA SR125, YAMAHA SEROW XT225 (SEROW), YAMAHA SEROW XT225 (SEROW), YAMAHA RZ50, YAMAHA RZ50, YAMAHA Mate/Mate DELUXE (MATE/MATEDELUXE)
I used it for YamahaBRONCO.
We chose it because it was cheaper than OEM.
Regarding Brake Performance
I don't see any difference between OEM and Large.
For durability, see ・・・・?
I don't know as it is after installation. I guess we will see the result at the next exchange.
View detail
Fits: その他 , YAMAHA MT-09, YAMAHA NMAX, HONDA XR50Motard, HONDA NSRMini, SUZUKI GSX-R125, SUZUKI GSX-R125, SUZUKI GS125 KATANA, SUZUKI GN125E, SUZUKI RGV250γ SP, SUZUKI Gixxer 150., KAWASAKI Z250FT, SUZUKI RGV250γ-SPII, SUZUKI RGV250γ-SP, SUZUKI RGV250γ, SUZUKI RGV250γ, SUZUKI RG250 γ, SUZUKI RG250 γ, SUZUKI RG250 γ, SUZUKI NZ250S
Touring destination security.
When parking in the open air at a touring destination, it is possible to cover the car so that the type of car is not identified.
It is very compact and can be placed in a corner of your bag.
A rope to hook onto a footpeg or other device to prevent it from flying away in the wind is also included.
View detail