Reviews
Fits: HYOSUNG GT 650 COMET R, HYOSUNG GT 650 COMET S, HYOSUNG GT 650 COMET, TRIUMPH TIGER 800 XRX ABS, TRIUMPH TIGER 900 RALLY, TRIUMPH TIGER 800 XRT ABS, TRIUMPH TIGER 800 XCX ABS, TRIUMPH TIGER 800 XR ABS, TRIUMPH TIGER 800 XCA ABS, TRIUMPH TIGER 800 XC ABS, TRIUMPH TIGER 800 ABS, TRIUMPH TIGER 800 XC, TRIUMPH TIGER 800, TRIUMPH STREET TRIPLE 765 RS ABS, TRIUMPH STREET TRIPLE 765 S ABS, TRIUMPH STREET TRIPLE 765 R ABS, TRIUMPH STREET TRIPLE 675 R ABS, TRIUMPH STREET TRIPLE 675 ABS, TRIUMPH STREET TRIPLE 675 R, TRIUMPH STREET TRIPLE 675
Genuine JT Sprockets 14t Front Sprocket for Suzuki SV 650 ABS 2008
This bike came in for a service and a new chain and sprockets fitting. This was purchased along with the rear sprocket just for the job. Have used JT sprockets for many years and know they are brilliant quality and do last a long time compared to some other brands. Easy part to find, I was surprised Webikes stocked them really and quite a few different versions for different models and makes. Price was pretty good. Ordered along with other parts so the shipping was good too. Arrived with no faults or issues. The outer box had been sealed with extra tape to ensure, nothing could fall out or escape during transit. Any empty space was filled with air pockets and bubble wrap so nothing could move too much and damage other more delicate parts in the box. The machining of these sprockets is second to none. The spacing for the bolts is perfect. No problems with anything really. I have not found a sprocket that is of high a quality for the similar price range before. I will stick with JT Sprockets. Have fitted before and know how they go on really easy little job. As I said, great quality parts from a great UK company. Thanks Webike for the great service as always and help with anything I need. View detail
Fits: KAWASAKI Ninja1000, KAWASAKI Ninja1000SX, KAWASAKI Ninja650, KAWASAKI VALCAN S, KAWASAKI VERSYS1000 SE, KAWASAKI VERSYS650, KAWASAKI Z H2, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Z900, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI ZX-25R, KAWASAKI ZX-6R, KAWASAKI 750Turbo, KAWASAKI ER-4n, KAWASAKI ER-4n, KAWASAKI ER-6f, KAWASAKI ER-6n
Stable SUNSTAR
I was not sure about BlackSteel, but I decided that lightness is justice.
I changed from 43T to 42T, but since it is Rear, I don't think it changes anything experientially.
Next time I will change Front as well and see how it goes.
View detail
Fits: KAWASAKI ZXR750R, KAWASAKI ZXR750R, KAWASAKI ZXR750, KAWASAKI ZXR750, KAWASAKI ZXR750, KAWASAKI ZXR750, KAWASAKI ZXR750, KAWASAKI ZXR250, KAWASAKI ZXR250, KAWASAKI ZXR250, KAWASAKI ZXR250, KAWASAKI ZXR250, KAWASAKI ZXR250, KAWASAKI ZXR250, KAWASAKI Z250LTD BELT DRIVE, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI NINJA ZX-7RR
ESTRELLA's crying place.
ESTRELLA's Restore, which has become immobile, maybe the end of the line here.
Just before it became immobile, it was leaking oil frequently, and I was looking for various causes this time while restoring it.
(1) Deterioration of Piston ring → done.
(2) CamTensioner problems→done.
(3) Gasket degradation → done.
I have been repairing the grains in various ways, but there was a blind spot.
There was oil leakage from the root of the oil pipe on the crank side.
Is it Gasket?
I took it off for a test, and as I expected, it was Gasket. I replaced it.
Oil pipe, as the name implies, is a pipe through which oil passes, but why is it attached?
It has to do with oil pumps.
Oil pump
Equipped on the lower front side of the cylinder block and driven in conjunction with the crankshaft.
The OilCleaner sucks up oil accumulated in the oil pan and supplies oil to the sliding parts of the cylinder head and cylinder block. 。
Think of it as gravity, so Oil goes down too, it accumulates in the Oil pan.
The oil pipe is where the oil passes through.
Oil pipe
Oil pipe is a piping that serves as a route to feed engine oil. 。 Engine oil plays a role in lubrication and cooling, and oil leaks can cause seizure and other problems. 。 Also called oil transmission pipe.
Engine oil not only lubricates the engine, but also cools it.
If the engine is air-cooled, the engine oil cooling effect is even more important.
And if the oil as an auxiliary role for cooling does not circulate correctly due to leakage, .......
→If the amount of engine oil is less than the proper amount, a strange noise may occur while driving, or the engine sound may become louder than usual. 。 In addition, low engine oil reduces the natural lubricating effect of the engine, causing a risk of engine seizure in some cases.
In my case, I don't know why it didn't burn out... I was able to manage to ride it while adding oil... now that I think about it, it's scary (laughs).
Gasket replacement.
Procedure
Remove the oil pipe from the cylinder head side, the carburetor side, and the crankcase side.
↓
(2) Gasket of rubber is confirmed at the tip of the pipe on the crankcase side. 。
↓
Replace (3).
↓
Assemble in the order of ? ?→?.
[After exchange]
◎Oil leaks are completely gone 。
◎A little test drive made it run Smooth.
This completely fixed the Oil leak. 。
Regardless of the year, it is a part that comes in contact with oil, so deterioration is to be expected. If you feel oil leakage even a little, it may be a good idea to suspect this part. 。
It seems that ESTRELLA has many examples of repairs here (laughs).
The only thing left to do is to adjust Tappet.
View detail
![ZVM-X2SeriesChain 525ZVM-X2 Gold [Crimp(ZJ)Joint included].](https://img.webike-cdn.net/catalogue/images/116443/525g_TS.jpg)
Fits: SUZUKI GSX-S750, YAMAHA YZF-R6, YAMAHA YZF-R1M, YAMAHA YZF-R1, YAMAHA XSR900, YAMAHA XSR700, YAMAHA TRX850, YAMAHA TDM900, YAMAHA TDM850, YAMAHA MT-10, YAMAHA MT-10, YAMAHA MT-09 To Racer, YAMAHA MT-09, YAMAHA MT-07, YAMAHA FZR400, YAMAHA FZ8, YAMAHA FZ8, TRIUMPH TT600 (TRIUMPH), TRIUMPH TIGER800XC, TRIUMPH TIGER800
DID for peace of mind
Because OEMChain is Steel as it is, it becomes dirty soon, it exchanges it though it is still less than 2000 km.
My previous Motorcycle also DID use VZM-X,
I liked it so much that I decided to go with its successor MODEL VZM-X2 in Repeat.
We also replaced the Sprocket with a new one, which looks better and Large is satisfied with the new look.
View detail
![VR46 Series Chain 525VR / 46 Silver & Gold [Caulk (ZJ) Joint Included]](https://img.webike-cdn.net/catalogue/images/89180/525VR_46_2_TS.jpg)
Fits: DUCATI 998S, DUCATI 998S, DUCATI SPORT1000, KAWASAKI NINJA H2, HONDA CBR600F, HONDA CBR400RR, HONDA CBR400RR, HONDA CBR400R, HONDA CBR400F, HONDA CBR400F, HONDA CBR400F, HONDA CBR400F, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CB500 ( S ) 01-05, HONDA CB600F, HONDA CB600F, HONDA CB650F, HONDA CB750, HONDA CBF500
Everything arrived on time, I'm happy with the parts. I ordered a chain, the quality is excellent. Thank you.
My long-awaited purchase, the DID VR46 chain has been in my sights for a very long time. Vestb goods arrived on time. I am satisfied with the product, the quality is excellent. -------------------------------------------------- -------- My long-awaited purchase, the DID VR46 chain has been in my sights for a very long time. Vestb goods arrived on time. I am satisfied with the product, the quality is excellent. Powered by Google Translator View detail
![[Stock Lever] Brake Master Cylinder Kit [Horizontal Type 5/8" / Tank Separate Body Type]](https://img.webike-cdn.net/catalogue/images/105373/61738_TS.jpg)
Fits: HONDA CBR400F, HONDA CBX750F, HONDA CB1100F, HONDA CB1100R, HONDA CB900F, HONDA CBR1000F, HONDA CBR600F, HONDA CBR750, HONDA VF400, HONDA VF750F, KAWASAKI KR-1/S/R, KAWASAKI Z750FXII/III, KAWASAKI ZR-7/S, KAWASAKI ZRX1100, KAWASAKI ZRX1100II, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX400, KAWASAKI ZRX400II, KAWASAKI ZX-7R
NisshinBrake master cylinder kit (Horizontal Type)
I wanted to finish bleeding the air out of the brake fluid in one go, so I replaced it together with the brake hose replacement. The touch of the brake also worked better than before, and I am satisfied with the large change. I recommend everyone to dress-up the front area! View detail
![ZVM-X2SeriesChain 525ZVM-X2 Silver [Crimp(ZJ)Joint included].](https://img.webike-cdn.net/catalogue/images/116443/525s_TS.jpg)
Fits: SUZUKI GSX-S750, YAMAHA YZF-R6, YAMAHA YZF-R1M, YAMAHA YZF-R1, YAMAHA XSR900, YAMAHA XSR700, YAMAHA TRX850, YAMAHA TDM900, YAMAHA TDM850, YAMAHA MT-10, YAMAHA MT-10, YAMAHA MT-09 To Racer, YAMAHA MT-09, YAMAHA MT-07, YAMAHA FZR400, YAMAHA FZ8, YAMAHA FZ8, TRIUMPH TT600 (TRIUMPH), TRIUMPH TIGER800XC, TRIUMPH TIGER800
First Chain replacement at 30,000 km
It has about 30,000km on the OEMChain and was replaced along with the front and rear Sprocket to refresh it in conjunction with the Engine's OH.
We chose DID, which we have used and trusted on another motorcycle.
I had a hard time deciding on the color, but this time I went with silver. I guess there are different tastes in this area.
The Sprocket fraction has not been changed, so it is Exactly at 106 LINK.
Durability is yet to be determined, so we have set it at 3.
View detail
Fits: KAWASAKI KDX250SR, YAMAHA DT230 LANZA, YAMAHA DT230 LANZA, HONDA VTR1000F VTR1000F FIRESTORM, HONDA VTR1000F VTR1000F FIRESTORM, HONDA VTR1000F, HONDA VT250 SPADA, HONDA VTR1000F, HONDA VT250 SPADA, HONDA VT250FXELVIS, HONDA VT250FXELVIS, HONDA VT250F2H, HONDA Shadow750, HONDA ShadowSLASHER, HONDA SL230, HONDA ST1100, HONDA VFR400Z, HONDA VRX400R100 ROADSTER, HONDA VFR400Z, HONDA VFR400SE
Is there a problem with being thinner than OEM?
I'm sorry I couldn't provide a photo, but when I used it on my NINJA2 Helmet 50RSL, I compared it with the OEM one, and the shaft part that holds the pad is clearly thinner,
The measurements were taken from the OEM, so they should be the same diameter." This was the case
I have a question for those who are familiar with Brake, is there any particular problem with the thin shaft part?
Has anyone who bought the same Stainless Steel Pad Pin had a similar case? I would like to hear your opinion. Thank you in advance.
View detail
Fits: SUZUKI BOULE VARD 400, KAWASAKI ZX-14R, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI XN85TURBO, SUZUKI GS650G, SUZUKI GSX-R750SPR, SUZUKI GSX-R750W, SUZUKI GSX-R750R, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX750RR, SUZUKI GSX750R, DUCATI M1200 STRIPES, DUCATI M1200 S
It was the best Size for W800.
I replaced the previous Type, and the size seems to have changed. I thought it was Large and sturdy.
It was the best size, completely covering the front and rear tiers with the Center Stand hanging down.
Moreover, it was exquisite that the Limit did not stick to the ground.
The fabric seems to follow the fabric from the previous MODEL, so there seems to be no concern about waterproof and durability.
The sealing tape at the seams seems to be firm, but in the past I have handled it roughly and the tape almost peeled off, so I try to handle it carefully, especially when taking it on and off.
Also, the bike is used in a covered parking lot where there are gusty winds, and the side cover has been scratched when the cover flaps.
Nevertheless, Balance's performance and price, which provide long-term protection under the current conditions, are unparalleled in quality.
The lower part of the cover can be adjusted to a very narrow range, and the belt near the center can be securely fastened, so that flapping can be suppressed to some extent.
As described above, the basic functions as a Cover are perfect, and it is made to be less prone to defects.
The black fabric does not stand out, and the color-coded lock holes on the front and back are designed for ease of use and security.
The cover is well made and is useful as a cover with waterproof function, protection, strong fabric, durability, and security effect.
View detail
Fits: KAWASAKI BALIUSI, KAWASAKI ZEPHYR400 χ, KAWASAKI ZX-7RR, KAWASAKI ZX-7R, KAWASAKI , KAWASAKI XANTHUS, KAWASAKI ZXR400, KAWASAKI ZXR750, KAWASAKI ZXR250, KAWASAKI ZRX400
For future maintenance
Purchased in anticipation of future maintenance using the Maintenance Stand.
Installation is as simple as tightening the bolt.
View detail
Fits: KAWASAKI KDX250SR, YAMAHA DT230 LANZA, YAMAHA DT230 LANZA, HONDA VTR1000F VTR1000F FIRESTORM, HONDA VTR1000F VTR1000F FIRESTORM, HONDA VTR1000F, HONDA VT250 SPADA, HONDA VTR1000F, HONDA VT250 SPADA, HONDA VT250FXELVIS, HONDA VT250FXELVIS, HONDA VT250F2H, HONDA Shadow750, HONDA ShadowSLASHER, HONDA SL230, HONDA ST1100, HONDA VFR400Z, HONDA VRX400R100 ROADSTER, HONDA VFR400Z, HONDA VFR400SE
More rust-resistant than OEM Product
I used this for an overhaul of a very old OEM Caliper. The previous owner had maintained it to some extent and it was not so badly worn, but I wanted to assemble it in a new and clean condition if I was going to overhaul it. I chose it because I wanted to assemble it in a brand new and clean condition. View detail
Fits: KAWASAKI ER-6F, KAWASAKI ER-4N, KAWASAKI Z250, KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1100/ZX-11, KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1100II, KAWASAKI Z750S (water-cooled), KAWASAKI Z750 (water-cooled), KAWASAKI Z750 (water-cooled), KAWASAKI Z1000 (water-cooled), KAWASAKI Versys 650, KAWASAKI Ninja 650R, KAWASAKI Ninja 650, KAWASAKI Ninja 250R, KAWASAKI Ninja 250, KAWASAKI Ninja 1000 (Z1000SX), KAWASAKI ER-6N, KAWASAKI ZX-6R, KAWASAKI ZX-7R
Misleading product photo
The photo shows the connecting kit for a universal handlebar type, although the motorcycle fitment list showed only certain variants of Kawasakis. This led me to believe the listed Kawasaki models used a mounting method that would be compatible with universal handlebars, or that different connecting kit options would be available in the package. None are, and there are no other places to order a connecting kit for these bar ends other than some small shop in Taiwan. As a result these bar ends are now an incredibly expensive paper weight for me. View detail
Fits: KAWASAKI Z 1000 SX , KAWASAKI Z 1000 SPECIAL EDITION , KAWASAKI Z 1000 ABS SPECIAL EDITION , KAWASAKI Z 1000 ABS SPECIAL EDITION , KAWASAKI Z 1000 ABS R EDITION , KAWASAKI Z 1000 ABS , KAWASAKI Z 1000 ABS , KAWASAKI Z 1000 ABS , KAWASAKI Z 1000 ABS , KAWASAKI Z 1000 , KAWASAKI Z 1000 , KAWASAKI Z 1000 , KAWASAKI Z 1000 , KAWASAKI VERSYS 1000 ABS SPECIAL EDITION , KAWASAKI VERSYS 1000 ABS SE , KAWASAKI VERSYS 1000 ABS , KAWASAKI VERSYS 1000 ABS , KAWASAKI NINJA ZX-7 RR , KAWASAKI VERSYS 1000 ABS , KAWASAKI NINJA ZX-9 R
Genuine JT Sprockets Rear for Ninja ZX-9R
I had previously purchased the front sprocket for this bike but had forgotten to order the rear. My bad. Finding the right JT sprocket was not hard and once found added to my basket. I have used JT sprockets for many years and on all kinds of bikes I have owned and fitted to customers bikes. They are top quality and last a long time compared to some brands in this price range. My order was shipped along with a few other parts and arrived promptly in 5 days from being shipped from Webike warehouse. My parts were all superbly packed and there was no damage during transit. The sprocket itself came in the standard JT sprocket packet and was all ready to fit. The teeth on these sprockets are super clean. Fitting took literally minutes on this bike and once all fitted, I test rode it for myself. Excellent. Thank you very much Webike for taking the care with my orders. View detail
Fits: HONDA GYROUP, HONDA GYRO CANOPY, HONDA GORILLA, HONDA ELSINORE 250(MT250), HONDA APE TypeD, HONDA XR50 MOTARD, HONDA TL125IHATOVO(TL125S), HONDA XR400 Motard, HONDA XR250MOTARD, HONDA XR250, HONDA XR230MOTARD, HONDA XR100MOTARD, HONDA XR230, HONDA XLX250, HONDA XLR250, HONDA XL500, HONDA XLR250, HONDA XL400R, HONDA XL250, HONDA XL125
ALCAN hands iGrip
I have used it for VTR250 and MT-03, and I bought it again this time. The color is Orange red to match the body color, and it is a good accent for the handlebar. When I installed it, I used a small amount of glue to prevent shifting and decided not to use wiring. View detail
Fits: KAWASAKI ZXR400R, KAWASAKI ZXR400R, KAWASAKI ZXR400, KAWASAKI ZXR400, KAWASAKI ZXR400, KAWASAKI ZX-9R, KAWASAKI ZXR400, KAWASAKI ZXR400, KAWASAKI ZXR400, KAWASAKI ZXR400, KAWASAKI ZRX1200S, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900, KAWASAKI Z800, KAWASAKI ZXR400R, KAWASAKI ZXR400R, KAWASAKI ZXR400R, KAWASAKI ZXR400R, KAWASAKI ZXR750
Sunstar racing steel sprocket
Item received safely.my third order in two month.really satisfied with webike.packing was super awesome.very professional.overall great service.highly recommended.no regret to shop at webike.thank you webike View detail
Fits: HONDA 400X, HONDA 400X, HONDA BROSProduct1, HONDA BROSProduct2, HONDA CB-1, HONDA CB-1 TYPEII, HONDA CB1000R, HONDA CB1000R, HONDA CB1000SF, HONDA CB1000T2, HONDA CB1100, HONDA CB1100SE, HONDA CB1100EX, HONDA CB1100BLACKSTYLE, HONDA CB1100RS, HONDA CB1100E Package, HONDA CB1100RS Final Edition, HONDA CB1100EX Final Edition, HONDA CB1300 SUPER TOURING, HONDA CB1300SF
Good cosmetics, old standby.
[How is it used?
It has been a standard consumable for a long time. I use this Filter every time.
How was your experience with it?
The quality is stable and reliable. I am satisfied with the quality of the product and have had no problems with it.
[Points to note]
Even if you use Filter wrench, you may choose to use Wrench because it is a Type without corners. I have never had a problem because I stick the Driver in and remove it.
How did it compare to other products?
It is comparable to the OEM Product, and I don't think there are any problems. There is no visible difference in performance, but it is a good consumable item for periodic replacement due to its good cost performance.
View detail
Fits: KAWASAKI AR125S, KAWASAKI AR125S, KAWASAKI AR80-II, KAWASAKI AR80-II, KAWASAKI AR80-II, KAWASAKI BALIUS, KAWASAKI BALIUS, KAWASAKI BALIUS, KAWASAKI BALIUS, KAWASAKI BALIUS, KAWASAKI BALIUS, KAWASAKI BALIUS-II, KAWASAKI BALIUS-II, KAWASAKI BALIUS-II, KAWASAKI BALIUS-II, KAWASAKI BALIUS-II, KAWASAKI BALIUS-II, KAWASAKI BALIUS-II, KAWASAKI BALIUS-II, KAWASAKI BALIUS-II
Oil seal
Project bike, one of most difficult to work on as need to disassemble exhaust to access. Easy to replace once old one removed. Love OEM parts at good price View detail
Fits: HONDA LEAD 50, HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA LEAD 50, HONDA LEAD 50, HONDA NS50F, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgman Type S
Purchased wrong size
I bought the wrong size. I'm thinking of buying it again. View detail
Fits: SUZUKI BOULE VARD 400, KAWASAKI ZX-14R, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI XN85TURBO, SUZUKI GS650G, SUZUKI GSX-R750SPR, SUZUKI GSX-R750W, SUZUKI GSX-R750R, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX750RR, SUZUKI GSX750R, DUCATI M1200 STRIPES, DUCATI M1200 S
I knew this was easy to use.
The fabric is thicker and has some stiffness compared to the Simple made by DAYTONA, which I bought last time, but I prefer this one because it feels more protective.
It is easier to have a belt sewn to the cover to prevent it from being rolled up.
The size is a little bit oversized around the rear, but I think the 3L size is good because it can wrap around the entire motorcycle.
View detail
Fits: HONDA 400X, HONDA 400X, HONDA BROSProduct1, HONDA BROSProduct2, HONDA CB-1, HONDA CB-1 TYPEII, HONDA CB1000R, HONDA CB1000R, HONDA CB1000SF, HONDA CB1000T2, HONDA CB1100, HONDA CB1100SE, HONDA CB1100EX, HONDA CB1100BLACKSTYLE, HONDA CB1100RS, HONDA CB1100E Package, HONDA CB1100RS Final Edition, HONDA CB1100EX Final Edition, HONDA CB1300 SUPER TOURING, HONDA CB1300SF
Cost performance！
It is a normal oil filter, no oil leakage and comparable to OEM. Cost performance is good. View detail