Reviews
It was exactly what I expected!
I used to use a P Company, but it looked like a Tourer from the front because of its height, so I decided to use the OEM+αSR Type.
In my opinion, this was a better fit.
The first delivery date was 5 months away, but it took about 2 weeks.
View detail
Fits: KAWASAKI ZRX400 05-08, KAWASAKI ZRX1100 97-00, KAWASAKI ZRX1200R 01-08
To ZrX1200DAEG
I installed it on my ZrX1200DAEG.
I chose Black, but I think it is windproof.
View detail
I am satisfied with the shape and performance.
I installed this on my 2012 CBR1000RR.
I was troubled with the MRA one, but this time I chose the standard Zero gravity CORSA, and the shape matches the design of the car body, and I think it has improved my parenthesis very much. The shape matches the design of the car body, and I think the parenthesis has been improved very much. As for the performance, I can feel the windproof effect when I lie down, and I have no complaints about the clear screen, which provides good visibility.
Since the CBR1000RR can be replaced without using the Cowletc.Rose, even beginners can easily install it.
On the other hand, the material of the screen is harder than the OEM screen, so there is a possibility that it may break if it falls down.
It seems to be a Screen that can be recommended to a wide range of people, such as those who are dissatisfied with the OEM Smoke Screen and those who want a new Screen for Replace.
View detail
Good quality, the shape of the double bubble is a bit "weird"
Some skills are required during installation. The original three fixed buckles of the windshield can be removed by adding a little detergent to lubricate, otherwise it will be difficult to pull out. The mounting hole closest to the outside is a little off. I don't know if it's a problem with the mold opening or my installation. The other 4 holes are just right, but this one is a little off. -------------------------------------------------- -------- I need some tips when installing. The three fixed deductions of the original wind can be added to add a little washing, otherwise it is difficult to pull down. The installation hole closest to the outside is a little bit, I don't know if the problem is the problem or I installed the problem, the other 4 holes are just right, that is, this is biased. View detail
too high for me
Different uses match different products, if there are only more cities, this one is not suitable for you. It's taller and looks a bit "weird", but I'm sure it will keep the wind out for long trips. -------------------------------------------------- -------- Different uses match different products, if it is just more, this is not suitable for you. Its shape is relatively high, it looks a bit ""strange"", but if you travel long distance, I believe that it is very good to wind. View detail
Looks great! Maybe I need to be careful when I use it?
The original Smoke Screen was replaced by a new one.
Replaced with a Double bubble Screen!
The purpose of this purchase is to reduce fatigue during long touring and long-distance highway travel.
At high speed cruising, the wind would hit the top of Helmet's head and
The wind hits near both shoulders.
Since there is less wind to the head, there is much less strain on the neck and shoulders.
Of course, if you lie down a little, you can cruise at high speed in silence with good visibility and no wind.
If it's more than that, it's a good thing;
This is a non-summer story.
If there is no wind, then the Helmet's Air Intake will not work as well.
This means that it is hot inside the Helmet.
It's hard for the driving wind to hit your body, so it's hot…
Anyway, it's hot from early summer to early autumn.
When I went on a long tour in October, I wore winter gear because I didn't want to be cold.
I got so hot, I felt sick like I had a heat stroke (sweat)
The problem was solved when I ran with the jacket's Fastener half open, but…
It makes you look and feel parenthesis, and it's great for cold weather, but
Be aware that this can easily become a problem in summer and hot weather.
View detail
comfortable screen
I bought this because the mounting Screen was cracked. I don't know how much work it took because I left it to PRO for the car inspection. The windproof effect is getting better. The appearance is also Parenthesis good, and I feel that the visual has become tidy. View detail
I didn't get as much wind as I thought I would.
Buy an Option Cowl from HONDA OEM.
On the way home after delivery, the Vinyl on the OEM Cowl area.
It couldn't stand the wind, or it would have stretched out like a billow.
I had no choice but to look for another manufacturer.
It was hard to find a good one that was...
I chose this product, which seems to have high cost performance.
It was in the price range, though, where it would have been a mistake to
I had no problems at all on the highway.
I think it's thanks to the fact that I was able to install it securely.
I'd like to take a ride on the Large.
View detail
good
The larger the size, the less wind is definitely there.
But because of the size, there is a little shaking when driving
This part seems to be unavoidable.
The material is not weak or has any scratches or anything like that.
Fits well and works well
Next time I will order a smaller one
------------------------------------------------------------ -------- The size is large enough for the wind.
But because of the size, there is a slight tremble in the time of driving
This part seems to be inevitable.
The material is weak or scratched or not. /> I am using well and use
Next time I will order a little smaller
View detail
Emphasis on appearance
If the OEM's Screen [Color] Because it was Clear. [Color] Purchased for the purpose of making Smoke.
I was originally going to buy the OEM Long Screen, but since it was sold out, I bought this one which was my second choice.
The wind blocking effect may be the same as OEM or slightly inferior due to the thinness (in my opinion).
The appearance is Large satisfaction. Screen design itself is thin(?), so it makes the whole body look more slender.
If you are looking for a windproof effect, the Sports touring is the best choice.
View detail
Fits: KAWASAKI ZX-25R SE, KAWASAKI ZX-25R, KAWASAKI ZX-4RR, KAWASAKI ZX-4R SE
It's tightened up!
Black body is tightened up with Smoke Screen!
Parenthesis is good!
View detail
Fits: HONDA CB400SB, HONDA CB400SB, HONDA CB400SB, HONDA CB400SB
Very effective for high speed wind protection.
It is CB400SB, but if it is compared with SF, the windbreak is not so bad.
I bought this because I wish I had more protection.
Installation is as simple as removing the Mirror and replacing the Screen.
Even on the open road, the wind was a little weaker at over 50 km/h, and
The effect was clear once I hit 80 kilos.
Sports touring type is good for high speed driving and long touring.
I bought it because you said so, and I'm glad I changed that because it worked.
Maybe I'll be less than half as tired.
As a reminder. [Color] I should have used Smoke, but if I had put Film for Light on the car...
[Color] Become Smoke.
View detail
Fits: KAWASAKI ZX-14R, KAWASAKI ZZR1400, KAWASAKI HIGH GRADE
quality standard height screen
Running the dark smoke for street riding which is fine , but limits vision for certain riding conditions such as night riding prone . The screens are well manufactured as you would expect , been relying on zero gravity screens from the 90's for various bikes I have owned . The clear screen is perfect for track use , the half smoke is great for street and also okay for track use . View detail
Fits: HONDA CB400SB, HONDA CB400SB, HONDA CB400SB, HONDA CB400SB
The effect will be worth it.
Was the installation difficult?
It's simple:Quantity:Pair (for Left and Right) Remove the Mirror from the OEMScreen, pull out the
Install the Screen.
How was your experience with it?
The effect of wind protection is hudrill at over 70km.
I think that's a good thing at low speeds.
[Included Parts:were they on?
There is no attachment.
[Was there anything that disappointed you?
The fact that I bought transparent and OEM. [Color] I think Smoke was slightly in there.
[Color] I thought I should have used Smoke.
[Demerit, or rather, caution]
Wind resistance is definitely reduced, but that makes it easier to get Speed out and
I thought it was necessary to pay attention to the speed.
View detail
Fits: KAWASAKI ZX-14R, KAWASAKI ZZR1400, KAWASAKI HIGH GRADE
Screen for Zero gravity ZX14R
When I had a ride on 1400GTR, I raised the movable Screen to the maximum and I didn't feel the wind pressure while driving. So I installed the Large type Screen for the winter.
However, since the installation was in September, I don't know if it will be a measure against the cold, but the windproof effect was felt enough (laughs).
It is easy to install because it only fastens with Screw.
The dust did not fit as well as it did on the original Puch Screen, but it wasn't too bad.
View detail
Fits: KAWASAKI NINJA H2 SX SE, KAWASAKI NINJA H2 SX
Same level as OEM
[Color] I bought it for the purpose of making it smokier and slightly more windproof.
Size is almost the same as OEM, and the windproof effect in normal Position
There was no change. Windproofing when down is good, as per manufacturer's comments.
[Color] Smoke's got a nice density to it though. [Color] Clear degree is fine Scratch
It has a sense of quality, and it is a quality that is often found in foreign products.
View detail
Refreshing design with no waste
[Usage]
Street riding, touring, mountain passes
Was the one you received as per Image?
MRADouble bubble that I have been using. [Color] Smoke is not bad, but I didn't like the design of Screen's step in my Image, so I decided to use SR Type's [Color] I thought that Smoke was something close to my Image.
Was the installation difficult?
If you don't fasten the bolt temporarily on the diagonal line, the bolt hole will not be even etc. and you can't install it. Also, the Washer under the Bolt is a Black Material.:I replaced it with a new one from Plastic.
How was your experience with it?
I think the design and the way it looks depending on the riding posture are perfect.
・ [Color] Smoke, but I don't think it's a problem for ETC.
[Included Parts:were they on?
It was only this product. I'll check at the next inspection if I don't need the molding on the edge when I inspect the car.
[Was there anything that disappointed you?
The bottom part of the Screen of MRA has Gradation, and the area around the Meter was not visible. [Color] This is Smoke, but you can see the bottom of the Meter.
[Opinions and requests to Manufacturer
I want LogoSealZEROGRAVITY to be able to retrofit without putting it on Screen.
View detail
Fits a 2020 NINJA2 Helmet 50R
2020 NINJA2 Helmet50R (EX250P) attached to the
NORMAL is [Color] It's clear, so I wanted to change the look to dark smoke.
It's not transparent at all, so if you don't like that [Color] We recommend Smoke.
The replacement is just to remove the 4 bolts of Mirror, so anyone can do it.
Zero gravity products have 5 patterns.
I'm very confused.
View detail
Fits: HONDA CBR250R (2011-), HONDA CBR300R, HONDA CBR250R (2011-), HONDA CBR300R
The effect is Large, but the production is a foreign product.
In order to improve the appearance and windproof performance from the OEMScreen of the '14 MC41 CBR250RSecond Type Model, the Double bubble [Color] Buy Smoke.
I couldn't decide between the CORSAScreen made by the company and the Racing Screen made by PUIG, but I decided on this one because of its appearance and the fact that I got it cheap.
The product [Contents] It contains a body, an Instruction Manual, a Large Sticker, and two Large Stickers, which are the same size as the ones on the Screen side. (Apart from the included Sticker, the Sticker is pre-pasted on the ScreenBody)
I bought it a long time ago for my 03'ZX-6R and it came with a protective molding for the Screen, but it wasn't included in the package because of Cost reduction.
The product looks like Image, not too dark. [Color] It's like Smoke, and at a quick glance it's a beautiful product with no particular rough edges.
It has good accuracy of installation with the car body, and the position is perfectly set without any processing.
…However, if you look closely, you can see that the cut surface is not well processed, and the mounting holes that should be open are not open. (Lol)
The installation itself is simple because originally it removes OEMScreen, transplants Well nut and Rubber Bush for installation from OEMScreen, and installs it, but in the case of MC41, Side cowl removal, Meter panel removal, Upper cowl& However, in case of MC41, it is troublesome because it is necessary to detach Side cowl, Meter panel, Upper cowl & detach Headlight unit.
It is necessary to open it by Drill&Fileetc. because the hole which inserts and fixes the projection of Meter panel at the time of the installation of Plus mentioned above is not opened.
I've seen your blog on the Net. (That means it's not only our product …) If installed without this work, a gap will be created between the Screen and Meter panel, which will look awkward.
It is about the windproof effect, but in the usual riding posture, with OEM, both shoulders as well as the upper part of the chest is almost exposed to the wind, but after the replacement, there is no change in the wind pressure on both shoulders, but from the chest up to the lower half of the Helmet, you can feel the windproof effect from about 60-70km/h.
In a considerable speed range, there was a feeling that Helmet was shaken by a little change of the air flow until now, but whether the rectification effect of Screen was effective or not, the wind contact became soft and the feeling of being shaken also disappeared. To be honest, it was a happy miscalculation because I did not think it would change so much.
It is the distortionlessness of the field of vision that the manufacturer claims when it is put down, but in the shape of the Double bubble, without any distortion … is impossible.
There is no unnatural distortion of vision due to the Rose of thickness, but if you are concerned about it, I think CORSA is better.
It also increases the height of the Screen and [Color] With the Smoke, Meter visibility during the day is also better depending on the angle of the sun.
However, the presence of the Screen in the field of vision by increasing the height is bothering at first. … but you will get used to it after a day of riding.
I think that there are pros and cons about the appearance, but the custom feeling comes out at once. It's a good product with good cost performance in that sense.
I think that the Rubber parts of the Screen fixation are deteriorating in the age, so I think that it is good to Refresh this opportunity.
Personally, if you can tolerate a little bit of processing, this is a recommendation for a good cosmetic Custom.
View detail
ZEROGRAVITY Zero gravity Screen [CORSA]
I chose this product because I wanted a Screen that was more windproof than OEM.
The OEM was hard to hit the wind when driving at high speed unless it was quite down, but it became much easier after changing.
It doesn't look unnatural, and if you don't look carefully, you won't feel any discomfort at all.
I was able to install it without adjusting the hole position. However, I prepared the OEM new Well nut.
As others have commented, there is nothing on the front of the Screen, so you can see the back of the Meter. I put some Black Seal on it to make it look OEM.
View detail