Reviews
Screen Change
Changed from Smoke Screen to Clear Screen for On boardCamera use.
The replacement is easy, looks good, provides good visibility, and significantly reduces wind pressure on the helmet compared to a normal screen, so it is a recommendation for those with normal screens to replace them.
View detail
disappointing
Wind protection effect is almost the same as NORMAL 。 It is 5 cm shorter than the external one we have been using and the cost effectiveness is Zero. View detail
Fits: HONDA CB400SB, HONDA CB400SB, HONDA CB400SB, HONDA CB400SB
Zerogravity CB400SB
It is very easy to install the windscreen as it has the same fit just like OEM windscreeen. The windshield is not only giving you comfort riding from wind but also has excellent quality of material. I found it is even better over OEM windscreen material. Webike also sent this item to South Korea very quickly. I am very satisfied with this item and Webike delivery service. I highly recommend this one. View detail
It was just like the image.
I was satisfied with the Large model because I had installed it on my previous motorcycle and it was just like the Image in terms of wind pressure reduction and looks when riding.
I asked a motorcycle shop I know to do the installation, and the fitting was perfect!
View detail
Fits: KAWASAKI ZRX400, KAWASAKI ZRX1100, KAWASAKI ZRX1200R, KAWASAKI ZrX1200ZrX1200 DAEG
The appearance of Balance has been improved.
Balance looks better than NORMAL. The Smoke Screen is also very elegant, and there are no floating parts, and the fitting is good. The new room on the meter will allow for an Oil Temperature Meter, clock, shift indicator, etc. View detail
Fits: KAWASAKI ZX-25R SE, KAWASAKI ZX-25R, KAWASAKI ZX-4R SE, KAWASAKI ZX-4RR
Parenthesis good!
Parenthesis good anyway!
[Color] It is a little difficult to see at night because of Smoke, but I don't think there is any Situation to drive through the Screen with your body face down at night, so I don't have any problem.
In a normal position, the wind hits up to the neck area.
If you get the state down a little, there is a good wind protection effect there.
If you get your body completely down in Straight, you are now perfect.
Installation is very easy.
Just remove 6 Screws.
Size is perfect, no Bolt hole Gap.
However, only porting the Rubber Parts from the removed Normal screen is a bit Large strange. You can remove it someday by shifting it diagonally. (^o^)
View detail
It's flimsy.
As others have noted, it is proportionally thinner than OEM.
It will be much better if you put thin Rubber on both sides and plug it in.
Also, it scratches quite a bit, so be careful when wiping.
View detail
Very usefull
Parts received in good condition. Only custom clearance need to paid the duty. Already tested on my bike.Even with high speed, no issue guarantee. Recomended to others. View detail
Fits: HONDA CB400SB, HONDA CB400SB, HONDA CB400SB, HONDA CB400SB
Easily replaced.
Screen was a little dirty and was replaced.
With 2BL-NC42, this is the only Other Brand Product available, Zero gravity. However, I appreciate it.
If we were going to replace it, we wanted something windproof, so we chose this one.
Installation did not take much time.
I have not driven on the highway yet, so the effect will be seen in the future, but I think it is good that the large size is not too large and it is cleaner than expected.
The test ride is good, with no chattering.
View detail
Fits: HONDA CB400SB, HONDA CB400SB EPackage, HONDA CB400SB SE, HONDA CB400SB
Windproof &Styling
With the OEMScreen, even at 165cm tall, the wind was hitting me in the upper chest area, but when I switched to this one, it changed to the Helmet area. When I get down, I feel almost no wind pressure.
I had a hard time deciding between the touring type and the double bubble type, but the design of the double bubble type was too small for my liking, so I decided to go with the double bubble type. I used YouTube as a reference for the installation.
I will post a comparison photo with the OEM.
View detail
Distortion generated in the manufacturing process
The edge bend was distorted and the surface was rough and white.
I was told that they would exchange the product for a more beautiful one if they had it in stock, but I thought it was Out that they were shipping this level of product in the first place.
Screen shape of New Model GSX1300R HAYABUSA (R of the edge is too tight) is it difficult to process?
As expected of US Specification, I have used MRA on my Motorcycle until now and this has never happened to me.
Unfortunately, this time we did not use it and had to deal with the return.
View detail
Looks great! Unobstructed view!
[Design]
Double bubble looks cool from the outside!
[Color] Smoke doesn't hurt visibility either!
【attachment】
Very easy to install, but does not come with anti-vibration Rubber.
Must be attached to the tip.
OEM Product can be diverted, but it is better to have a slightly thicker anti-vibration Rubber separately. ←Important!
(because the Screen is thinner than OEM)
If this is not installed, it will shake when driving.
Other people's Reviews have talked about vibration, but this is almost certainly the cause.
It is a regrettable Point that the anti-vibration Rubber is not included.
View detail
Fits: HONDA CB400SB, HONDA CB400SB, HONDA CB400SB, HONDA CB400SB
Style and windproof performance are as expected!
Regarding SUPER BOLDOR's wind protection on the highway, I found the OEM Screen to be less effective than I had hoped, as the only 2BL-NC42 compatible with it was the Zero gravity one, which has the most wind protection. "Sports touring" You have selected the
I was worried that it might be a little too large in the product introduction photo, but when I actually installed it, I found that it is not so large and the style is not bad at all. The impression from the front is that it is not too large, but from the side, the screen stands up like a tourer. [Color] The color of Smoke looks a little darker when compared to OEM, but I think Zero gravity has higher transparency, etc.
As for the crucial windproof performance, it will be much improved.
It was considerably reduced even when driving at legal speeds on ordinary roads, and it changes Larger on highways.
I still have the impression that the Screen is standing up, which reduces the roll-in.
I'm just under 5'5" and feel like I can feel the wind from Helmet's mouth.
The only installation procedure is to remove the Mirror and the 6 screws on the back of the Mirror, and then remove the screw pedestal from the Screen while floating the Cowl a little. I did not feel any Chatter even at high Idling RPM in winter.
The texture is a bit cheap compared to OEM, but I am satisfied with the high visibility and wind resistance.
Also, the Smartphone Holder attached to KIJIMA's Handlebar Mount Bracket can be covered without popping up, which increases the sense of security when driving at high speeds.
View detail
As per Image.
[How is it used?
Street Riding Main
Was the one you received as per Image?
Image
Was the installation difficult?
it's simple
How was your experience with it?
Street driving is not a problem.
I don't think it is suitable for touring.Sports driving
Normal screen to ImeChain, the [Color] Perfect for those who like Smoke!
I am a [Color] I bought this because Smoke likes Large!
Dark smoke is slightly transparent in the sun.
I bought this one because I was concerned about the height of the touring screen when looking at the vehicle from the side.
View detail
I feel like it's not rigid enough…
I took it off because I was worried that it was shaking plumbly to the extent that I was driving on the highway, it looks good but ….
Compared to other companies' 3mm thick products, it is lightweight, so it is good for driving down the road.
View detail
Some difficulty in installation
The product has a 6" hole, but it did not fit at all. It did not fit at all.
The Lock Heart Screen had an 8? hole in it, so I used a Drill to drill the hole.
When we extended the system, we were able to install it without any difficulty.
I would like to see it built with a little more Well, since it is an Exclusive Design.
View detail
Replacement from OEM. Effective.
Windproofing performance would change considerably compared to OEM.
Since it is a Touring Main, it seems to contribute a lot to reducing fatigue due to wind protection.
View detail
Fits: KAWASAKI ZX-14R, KAWASAKI ZZR1400, KAWASAKI HIGH GRADE
Tight and Parenthesis good
Installed on a ZX-14R, no gap at the bolt position, easy installation, well nut is not included, so you need to remove the OEM screen or buy OEM parts. The old well nuts are hardened and will not fit, so I bought new ones.
I think the style is tight and parenthesis is good. Depending on the individual's physique and position, the running wind will just hit the shield, and the wind cutting sound has become larger.
View detail
Fits: HONDA CB400SB, HONDA CB400SB, HONDA CB400SB, HONDA CB400SB
Maybe it's what I expected.
I have only driven once at high speed, but I could feel the effect. I had felt that cruising at 110 km/h was the limit at normal speeds, but now I can cruise at the full 120 km/h limit with ease. If you are a small person, you may not feel it at all. I wish there was a product with a few more inches of height to make it easier to use.
Installation is easy. The build quality is in line with the price and does not have the high quality feel of an OEM product.
View detail
Zero gravityScreen
I bought the double bubble and it is perfect for touring. On highways, it is easy to drive because the wind hardly hits the car when it is slightly down. View detail