Reviews
![Universal Windshield [A601] (Medium-Sized)](https://img.webike-cdn.net/catalogue/10079/47719_01_TS.jpg)
I appreciate the size and the Brown.
Universal Product, so it has a high degree of freedom of installation. It has a good large size and brown color. [Color] The Smoke level is also exquisite, providing protection from the driving wind without interfering with visibility.
The product was exactly what I expected
View detail
![Tank Lock [MT505]](https://img.webike-cdn.net/catalogue/images/27457/94562_TS.jpg)
The convenience of Tank Lock is retained, and it goes in rather well.
I had been using Tank Lock for a while, but ordered this because my Fastener broke.
The capacity is just right for a touring mapple, a glasses case, a memo pad, etc.
The only thing that bothered me was that when closing with the fastener, there was a buckle in the middle of the fastener that got stuck.
Why is there a Buckle in the middle?
It's strange
View detail
GIVI indeed.
The B47 boasts the largest capacity of all the Mono-lock cases, and it does not look out of place on a large motorbike.
The capacity is sufficient for my needs, and I have a Helmet + a bag of tools + documents.
Side case is also available, but this one is usually sufficient.
View detail
Fits: SUZUKI DL1000 V-STROM650, SUZUKI DL1000 V-STROM1050
Easy to attach and detach!
To install, remove the three bolts from the tank cap and attach the attachment.
Simply place it on top and installation is completed with a "Snap" sound.
To remove it, simply pull the lever on the side to unlock it.
Installation and removal are very easy.
Note that Attachment is set for each car model and cannot be installed with this product alone.
Capacity is sufficient for my use.
There is also a hole for the cable to pass through, so the phone can be charged from the USB power supply on the car body.
However, the holes on the underside had to be drilled by myself.
Instead of a smartphone pocket at the top, a 1,000 bill is placed in it when passing through toll roads where ETC is not available.
Included Parts:Shoulder belt and Rain Cover.
When you leave the Motorcycle, you can use it like a Shoulder bag.
View detail
![[Repair Parts] Universal Base Repair Parts](https://img.webike-cdn.net/catalogue/images/129441/31335_TS.jpg)
I never thought Base would break.
I bought this to replace the Base I had been using because it broke.
The claw that holds the rear box in place broke,
The Box is no longer fixed. I never thought this place would break.
Base must be replaced on a regular basis.
Depending on the condition of use, it is expected to be Large sturdy for 4-5 years.
View detail
Genuine Givi Small Universal Screen fitted to XSR900
I was going to go for a different make but have read a lot of great reviews for this one. The Givi Small Universal Screen. A brand I have not had much dealings with but a few customers have had these brand of screens. They are reasonably priced and the fitment is perfect with what I have read. With a few other items in my basket and this screen meant that the shipping was really good value because if you have a few smaller parts this cuts down on shipping individually.Some of the other parts were always going to be an issue in case they scratched the screen. Webike think of all this and pack your items accordingly. The screen was packed in a loveley thick bubble wrap and taped closed. The rest of the parts in my order were all padded and therefore, no damage could occur during transit. Webike even tape theentire box closed. EMS fast service is what I chose, the cost was so good and all my items were delviered in 5 days.The screen arrived with me in perfect condition and I am not surprised by the amount of bubble wrap that was surrounding it. The screen has a bit of flex which of course yo need, all the bolts and fixings are present and I used these to affix to the XSR900 I had sat in teh garage. It did take a little modding but eventually fitted. It really is a lovely retro looking screen which is what I was aiming for anyway. Not really much else to say about it until I actually take a ride out but the smoke colour does add a nice touch to the whole look of the bike now. All together, I am very pleased with how it looks and how it all went together. Not a tough job for anyone. So, thank you Webike for the great services. View detail
![[Repair Parts] Security Key (1pc.) [GIVI SL101]](https://img.webike-cdn.net/catalogue/images/74127/1_145759900864171600_m_890uz_l_TS.jpg)
Fits: Others OBK58/42 : V56 : TRK52 : V46 : TRK46/33 : B33NMK : V47 : V40 : B47 : E470 : E450 : B37 : E370 : E350 : E340 : B33NML : E300N2 : E260 : E230 : OBK48/37 : V35 : B27N : B360 : E250
for Replacement
I used to buy a GIVI 45LiterBox and used it for years, but one day the key suddenly stopped turning. After using it for a while, it stopped closing at all, so I decided to replace it.
I was worried because I did not know how to replace it, but I saw a video manual on DAYTONA's site before I purchased it that showed how to replace it, so I decided I could do it myself.
If you are anxious, it may be a good idea to watch the video manual in advance before purchasing the product, because you can actually replace the product by following the manual video.
View detail
parts shortage
The product was very well made, but the screws to attach the top case were not included. View detail
![Special Rack [SR1168]](https://img.webike-cdn.net/catalogue/images/91664/19703_01_TS.jpg)
Simple construction
[How is it used?
Used to install a GIVI Box.
Was the one you received as per Image?
The Pipe diameter was thick and strong enough, just like the Image.
How was your experience with it?
GIVIMono-lock basePlate was also fixed firmly and was simple and well made.
[Points to note]
Quantity:Pair (for Left and Right) The two symmetrical parts were aligned at the back center and bolt-tightened.
The screw holes on the tire house side were a little difficult to align, so we installed it by picking up the four screw holes little by little.
How did it compare to other products?
No comparison was made.
▼Other than that... I tried to install KIJIMA's back support item number:210-4963.
The Shock absorber side of the OEM Carrier has a thin wall on the inside of the Shock, while the Shock absorber side of the OEM Carrier has a thin wall on the outside of the Shock.
The GIVI rack is thick-walled, and the thick flat washer on top of the Shock is removed and tightened with a cap nut.
The thickness of the plate on the Cap Nut side of KIJIMA's back support eliminates the screw space for the Cap Nut to stop.
It could not be installed.
View detail
In the meantime, if you're having trouble, this shade might suit you.
I have been using the same Case for a long time, and I removed it before I gave it away.
The black reflective material on the rear of the box is also black, and it is a nice touch to tighten up the color scheme.
Two days and one night in terms of the Large size of the box. (Hotel stay) If you buy souvenirs or other items, you will be quite full, so if you use a fanny pack or courier service, you will have a little room to spare.
View detail
Sufficient capacity
[How is it used?
Commuting to Day Touring
Was the one you received as per Image?
Large enough as shown in the Image
How was your experience with it?
I used to use a 26-liter GIVIBox.
This 32-liter box is sufficient for your needs.
[Points to note]
Since the inside of the box is made of bare plastic, it is designed to absorb shocks as the luggage goes wild inside the box.
Shock absorption measures are required.
How did it compare to other products?
No comparison was made.
Other items that would be helpful
Installation Point or hang
Items to buy together:Special rack [SR1168]
Brand：GIVI:GIVI Item number:19703
View detail
Parenthesis OK
I have not installed it yet, so I gave it 3 stars for ease of installation and feel. However, I like the fact that the shape is a little different from the so-called Top case, and I think it will look good on my motorcycle. View detail
![Mono Lock Case [E30TN2]](https://img.webike-cdn.net/catalogue/images/15075/94145_O01_TS.jpg)
Once you use it, you feel inconvenienced without it.
It is a must-have item to increase loading capacity.
Once used, it is so convenient that Parenthesis becomes secondary.
With a capacity of 30L, it is sufficient for touring for one to two nights.
Luggage can be thrown in for now, and especially in rainy weather, there is no need for a Rain Cover, so it is very convenient.
Without any other luggage, a System helmet in Size XL can also be accommodated.
View detail
![Fitting for Monorack [7707FZ]](https://img.webike-cdn.net/catalogue/images/91664/18890_01_TS.jpg)
Mounted on 250DUKE
I was thinking of adding a Carrier in terms of style, but I thought it could be a substitute for a Carrier without a Top case, and also I thought it would be too much of a fussy thing, but I guess it is not so much once you get used to it.
It went on the 250DUKE with no problem, as it should.
When installing, there should be no problem if the entire unit is temporarily assembled while tightening it at the end.
However, it can't be helped that it is Steel, but I think GIVI's Bracket is quite prone to rust in the smallest details.
View detail
Parenthesis OK
I bought it because I like the fact that it is not a so-called "top case". I haven't installed it properly yet, but I'm looking forward to it. View detail
Easy installation
Simply remove and replace the 6 Bolts around the fuel supply port.
The vSTROM800DE is not compatible, but it arrives without problems.
View detail
![[Replacement Parts] Inner Mat for B32 Series [PB32N]](https://img.webike-cdn.net/catalogue/images/75563/16011.PT01_TS.jpg)
GIVI Inner Mat
I installed the Inner Mat on my GIVI commuter scooter. I am satisfied with the size and quality of the mat. View detail
![TREKKER OUTBACK [OBK37PACK2] Aluminum Mono Key Side Case](https://img.webike-cdn.net/catalogue/images/126869/98492_TS.jpg)
GIVI is as it should be.
I am satisfied with both the usability and quality. It is very easy to attach and detach, and I look forward to long touring. View detail
![CAM Pannier Holder [PL3112CAM]](https://img.webike-cdn.net/catalogue/images/91664/96665_01_TS.jpg)
Fits: SUZUKI V-STROM650, SUZUKI V-STROM650XT
Just fit Suzuki V-Strom 650 XT 2023
After several communications with Customer Support regarding fitment, I was able to confirm the fitment and purchased the product. Just fit the car body and I am satisfied. View detail
Use only LED Lighting Parts
Purchased to add High Mount Stop Lamp to GIVIRear box.
Various parts are included in the kit, but only LED Lamp parts are used.
Installation is easy from the BoxReverse side, and I extended the wiring myself with an Extension Cord to the bottom of the Seat. The wiring does not look good, but it is not visible from the outside.
It is an exclusive product, but the price was a bit high for just the Lamp component.
Reference and
The color of the Base of the BoxBody is more than Red. [Color] Smoke is more noticeable when lit.
Around Lamp (Inside) The reflective material was stretched over the
A hole of approximately 7mm is drilled in an inconspicuous location at the bottom of the Box.
View detail