Reviews
Fits: HARLEY-DAVIDSON V-RODFamily, HARLEY-DAVIDSON TOURINGFamily, HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON DYNAFamily
Buckhorn Handlebars
Great product with good workmanship. Bought the dent bar.Have to drill holes for internal wiring when installing the handlebars and does not need to extend the cables from my previous bar. View detail
Fits: HARLEY-DAVIDSON SOFTAILFamily
Just like in description.
Just like in description. Fits fine. Jee jee jippiajee ja niin pois päin..
Tuli nopeesti postilla.
Shovelhead 1973...
----------------------------------------------------------
Just like in description. Fits fine. Yee yee yippieee and off we go..
Came quickly by post.
Shovelhead 1973...
Powered by Google Translator
View detail
Good quality!
I bought a Motorcycle Blinker from a used MotorcycleParts store…only the Lens part was damaged and I kept thinking that the Body was still usable…but I threw it in my tool box for 5 years…. I bought the same size and design and installed it! It fits EXACTLY! The Blinker is of good quality and durability at a low price! I will recommend this product to all my friends! View detail
Fits: HARLEY-DAVIDSON XL1200C SPORTSTER 1200
NeoFACTORY
I have not used it yet, but it is cheaper than OEM and looks durable. View detail
Fits: HARLEY-DAVIDSON 3ΩCoil cars
Smaller processing may be necessary depending on the type of car and the type of coil.
Purchased this product as Ignition wire for BMW.
First of all, the length was long, but that was not a problem, because it could be cut off if it was too long.
The connection terminals on the Ignition coil side were simpler than those of the OEM, and the quality of the terminals varied.
I had no problem because I assumed that I would have to change the connection terminal, but I think that those who use it as it is should check it with caution.
Durability is still to be determined.
View detail
Fits: HARLEY-DAVIDSON Universal
Voltmeters for Motorcycle
Although not particularly necessary, a voltmeter was installed since it is also attached to the car.
White light is also provided, making it easy to see at night.
KITACO for mounting on Mount bar (KITACO) Meter clamp set Motorcycleetc. 672-1126900, etc. required.
Other items in the photo are KIJIMAHandlebar Mount Bracket, Eye PRO ShiftIndicatorAPH8 Red, SP Mukawa Φ48Small DN Tachometer 12500rpm (with Rev indicator)
View detail
Fits: HARLEY-DAVIDSON SPORTSTERFamily
I have not used it yet, but it is cheaper than OEM.
I have not used it yet, but it is cheaper than OEM and looks durable. View detail
Fits: HARLEY-DAVIDSON Vehicles with Filter in Oil tank from 53-83
Just fit
I was worried about whether the product could be used because it is a universal product, but there was no problem at all.
It was Just fit.
The price was low, Packing was included, and it was very easy to just drop it off.
Very convenient for easy replacement.
View detail
Fits: HARLEY-DAVIDSON FX, HARLEY-DAVIDSON FXR, HARLEY-DAVIDSON XL, HARLEY-DAVIDSON FXDC DYNA SUPER GLIDE CUSTOM
Easily revert to OEM Style
I used this to return a 2000 XL883XL1200C SPORTSTER 1200 that had a Custom Tail lamp and License Plate Bracket to Normal style. This year's XL1200C SPORTSTER 1200 has the License Plate mounted on top of the Tail lamp, and I personally like the sloppy style of the Tail lamp. I personally like the sloppy style of the lamp. View detail
For Normal tank installation
Used on a 2000 XL883XL1200C SPORTSTER 1200 which was a Custom vehicle and the Tank had been replaced.Bolt&Nut and thankfulQuantity to be fixed when converting back to the NORMAL 3.3 GallonFuel Tank.:It was a Set. The length is right, but the fit is not quite right, as it seems to use Universal Product such as Rubber packing. However, I am satisfied with it because it fulfills the minimum function and it was easier than buying from Rose. View detail
Parenthesis is good
I'm concerned about some wobble, but I think it's unavoidable due to the structure.
[Color] Smoke has a wide field of view and blocks sunlight, so it is better to change to Large.
The Snap is so hard that it is unlikely to come off while driving.
View detail
Fits: HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON DYNAFamily, HARLEY-DAVIDSON V-RODFamily, HARLEY-DAVIDSON TOURINGFamily, HARLEY-DAVIDSON SPORTSTERFamily
Installation is easy
Installation is by OEMTail mounting Screws with Quantity:Just remove and replace the 2pcs. It's easy.
I think it's good for the Beauty Custom...
View detail
Required for OEM Carrier installation
I have a 2000 XL883XL1200C SPORTSTER 1200. I like the OEM Carrier design of this at the time and got the used Parts. However, it requires DOCKINGHARDWARE to install it, and there are almost no Parts available before 2003 model year. Thankfully, NeoFACTORY sells only the docking point, and I also purchased the bolt separately, but it was much cheaper. View detail
I appreciate that InchNut is available in 1pc. units.
I used this product to install DockingHardware on my 2000 XL883XL1200C SPORTSTER 1200. This time I used Nylon nut to prevent loosening, and the price was reasonable. View detail
Fits: HARLEY-DAVIDSON Vehicles with OEM CVCarburetor
Minimum Quantity to Overhaul carburetor:Set
I used this for an under-seat engine hole on a 2000 XL883XL1200C SPORTSTER 1200. The vehicle had been immobile for a long time and the Carburetor rubber parts were hardened and leaking fuel. The beauty of this kit is that it omits the Float, DiaphragmRubber, and other parts, and only requires a minimum quantity of parts.:The Carburetor functions have been restored and I am generally satisfied, but the rubber packing of the Float chamber does not fit perfectly and I am not able to assemble it. View detail
Inch bolt essential for Harley parts installation
I bought this to install parts on my 2000 XL883XL1200C SPORTSTER 1200. harley bolt nuts are inch size and are not sold at Motorcycle supply stores or home centers. I bought this from Quantity:It is very nice to be able to purchase it in 1 pc. This time, the purpose was to attach the DockingHardware to the Seat rail, but the back side is designed to screw directly into the Sub-frame, so the Bolt that is not an Inch Pitch can not be used. View detail
good product
I was able to install it on a 2019 1200Iron with no problems.
I think it's a good product
View detail
PosterInjectionTank exchange
I think the quality was good with no Gasoline leaks! View detail
Fits: HARLEY-DAVIDSON Universal
TE250i for Silencer.
I purchased this Glass Wool because the Exhaust System sound of my TE250i was getting DrumstickDrumstickDrumstickDrumstick noisy.
Silencer removal
↓
Remove 4 Bolt and pull out the contents.
↓
Wrap new Glass Wool and temporarily fix with masking tape
↓
Assemble in reverse order to complete.
(Gloves, Mask and Glasses are required)
After the replacement, the volume became quieter with a thump-thump-thump.
If you are looking for Silencer for KTM/Husk/GasGas system, this productQuantity:The large size can be replaced twice in 1 pc! (I think it costs about 5,000 yen if you buy OEM product)
Now I'm hoping for durability.
View detail
Genuine Continental Fuel Hose
I do have a lot of bikes come in with really bad fuel lines for one reason or another and I always like to have some of this hanging around for just this reason. One bike in particular had the original stock line which was far from good and this bike was literally a few years old, 2020. Really rigid line was replaced with this. I do like Continental fuel hose as it is proven to work exactly as it should and not be too rigid but also has enough flex to be abnle to loop around weird placements. This was well priced from Webike and they also packed my order with great care so not to damage or bend this hose where it should not be bent. It came as a nice loop.The flexibility is excellent. A really nice fit to the clamp fitment too. Very pleased, thanks Webike. View detail