Reviews
What is conformity…
Is this the right size? It's a small size at Level.
I've stretched and fixed it, but at least it's not for beginners.
You may have simply pulled a HaGap, but I wouldn't recommend it.
View detail
fraudulent product
ImageYou will receive something completely different from the image.
The one I received is also halfway in size and is a useless Garbage.
I never thought Webig would do this kind of business, so I was Large strange disappointed.
View detail
Fits: HONDA Today, HONDA Today, HONDA DIO(4Cycle), HONDA DIO(4Cycle)
Exchange from OEM
OEMSuspension by DioFit.
After 24 years, he must have passed away;
So I chose this as an inexpensive replacement part.
Just remove the Air cleaner and SeatBox and you're good to go.
There will be a slight rattle on the lower mounting part.
I think the Point is to bite one Washer.
View detail
UniversalLamp
The Meter Bulb was out, so I bought this for Replacement.
It lasted 6 months, but I would buy it again.
View detail
It's a place with Addressv125.
I used it on my Addressv125.
The last time I did this, I made it 16?
The drive system is NORMAL.
The Torque feeling was better with the 16? but the acceleration on flat ground was better with the 15?
View detail
Firm Spring force.
The spring is very firm and connects the joints of the exhaust pipe, it is convenient to use for repair and the price is cheap and the quality is good. View detail
As a Leg shield for CUB PRESS
It's deformed a lot on the inside, and in the winter, the wind will be stronger against your knees.
I installed each part with temporary fixation, but the position of the hole did not match, so I had to process the long hole and
I had to drill new mounting holes.
But for less than half the price of OEM, it's good enough for Cost performance!
I'm not angry because I imagined this much from the beginning (hole misalignment and deformation).
I think anyone can install it if they can drill the holes.
Best of all, it's much better than wearing OEM rags!
View detail
Fits: HONDA DIO(4Cycle), HONDA DIO(4Cycle)
If you're okay with it, you can buy it.
[Intended use]
The exterior of AF68 DIO that I got from an acquaintance was tattered, so I took a chance and bought it.
[How is it used?
1000km since I bought it.
Was the one you received as per Image?
The exterior Parts of the Other Brand Product were as Image in a bad way.
I had heard stories about how the dust didn't fit.
First of all, there were many White scratches on the surface even before I took the product out of the DanBall. The BALI of the mounting holes is also terrible.
Was the installation difficult?
The mounting holes do not match by any stretch of the imagination.
There are a few places here and there where there are no holes when compared to OEM.
On top of that, I got a triple Combo:no Instruction Manual.
If the hole doesn't fit by any means, I use Tie Wrap to stop it.
How was your experience with it?
The surface could be put on like that, so I'll give it a minimal circle.
[Included Parts:were they on?
None
Bolts have to be diverted from OEM.
[Was there anything that disappointed you? Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
[Availability and clarity of the Instruction Manual
I can't talk about it because it's not attached in the first place lol.
[Point and hang of installation].
You have to install it with your spirit.
If the hole doesn't fit, Tie Wrap it!
[Opinions and requests to Manufacturer
I doubt the quality of the manufacturing. I wonder what kind of dimensional instructions they put in to make such a terrible product.
View detail
Universal Product? Where is it? Worst Product
How about selling a product that fundamentally cannot be installed as a Universal Product?
It's a shame because I trusted Shop. I'll give up as a throwaway.
I just received it and threw it in the Garbage bin. Should avoid buying it!
View detail
Fits: HONDA Super Cub 90, HONDA Super Cub 90, HONDA SUPER CUB70, HONDA SUPER CUB70
I don't feel any different.
I found out that the HondaOEM Product will be torn down by IonCrack in 7~8 years, so I decided to replace the Front Fender for the second time with the Other Brand Product which is about 1/3 the price. There is no strange distortion, and other than the slightly darker color, there is no sense of discomfort like this, and I am satisfied.
All you need to do is to remove the front tire and 4 screws, so you can do it in 30 minutes.
The front fender sticker of the moped 2 class that was not attached to Honda OEM was attached from the beginning, and it was saved. Well, the way to put it was a little messy.
View detail
Fits: HONDA LEAD 100, HONDA LEAD 100, HONDA LEAD 50, HONDA LEAD 50
It's not OEM Product!
This product is not an OEM Product.
It certainly does not say OEM in the product description.
I had my doubts about the Gold amount, as it was quite low.
I think that should be included as an explanation.
The workmanship was not as good as it looked and I was quite disappointed.
Haven't installed it yet, but hopefully it will fit nicely.
It would be a disaster if this didn't get attached.
View detail
Large thresholdHelmet more than the value
I have a large head, so these products are very helpful! 。 Also, this Helmet is compatible with all Engine Displacement Volumes! 。 Not many cheap Jets can do that. 。 No more painful ear rubbing when you wear it. 。 The only problem is that Light smoke for ReplacementShield is too rare to find! 。 I need a spare Light Smoke Shield. 。 Branded items are likely to be stolen, and the fancy design, for what it's worth. View detail
The quality is very good. Delivery very fast Excellent service The product is exactly as the picture is not disappointed, the work is beautiful, well done Good packaging Overall very good, give 5 stars. View detail
Fits: HONDA LEAD 100, HONDA LEAD 100, HONDA LEAD 50, HONDA LEAD 50
Poor Webike support
I order a product, but I can't proceed because I'm checking with my supplier.
That sucks.
If you can't do business, then stop.
View detail
No harm in having it! Surprisingly firm Cowl
I've been riding PCX for about 5 years now.
From daily commuting to LightTouring and snowmobiling, SmallWound has been increasing.
He is a very good boy and I want to continue to drive him for a long time, so I bought Cowl as a spare.
When they arrived, each one was individually wrapped and secure, but I was surprised to find that the corrugated cardboard was large.
The shipping would have been expensive.
I opened it up and the quality is as good as the OEMCowl.
The surface is also well Lame processed, and I was surprised that it was amazing for this price.
As is the case with all motorcycles of this class, the claws that hold the cowl in place often break during operation, and 1 pcQuantity:If it's 2pc or so, it's no problem, but if 2-3 pieces are broken, you can't install it.
I have no plans to replace it in the foreseeable future yet. I bought this as a spare as similar products have been noticeably discontinued.
I was wondering if there was anything else that was this cheap.
View detail
Relatively solid construction.
I had to replace the Basket I had been using because it had become ragged.
I chose the M Size because it is not too large.
For a cheap price, it's surprisingly solid.
Unfortunately, the mounting screw is too long.
There is no problem in actual use, but the short screw on hand is the Quantity:I had 2pc so I just replaced the front.
Also, it's nice to turn off Handlebar and not hit the Leg shield.
View detail
Price.
It's dry, though.
I bought this cheaper one because my OEM Leg shield was ruined.
good point
Cheap.
The position of the Bolt is neat so it is easy to install.
I thought it was easy to paint.
A bad point
●Thinner than OEM, so less strong.
So, it is easy to make a hole when you put Emblem.
The area around the exhaust system is easily deformed by heat.
As a solution, near the exhaust system, Cut or Paper is used to take a little clearance and make a gap.
Maybe it's wrong to compare with OEM because the price is low, but it's not as good as OEM.
As for Merit, I want to keep it inexpensive like I do. Or if you want to add some color to your Leg shield, it's good. Depends on how you use it.
View detail
Fits: HONDA GIORCUB, HONDA SUPER CUB 50, HONDA CHALY 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA BENLY50CD50, HONDA DAX, HONDA JAZZ, HONDA GORILLA, HONDA LITTLE CUB, HONDA CUB press 50, HONDA LITTLE CUB, HONDA CUB press 50, HONDA CUB press 50, HONDA MOTRA, HONDA XR50 MOTARD, HONDA MONKEY BAJA, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY
This Parts was a failure.
I bought the 75cc→80cc for a change of pace.
When I went to assemble it, I couldn't fit the …Cylinder Skirt (lol).
It seemed to be 2cm higher than the Skirt for 75 (lol)
I also looked up the fitment and apparently the one I bought was an outlier.
I think it's my failure rather than Parts because there are a lot of people who rated it highly and installed it.
I ended up going back to 75cc and High Camshaft.
I'm in good shape.
If possible, I think that a domestic Manufacturer is better.
Since they come from far across the sea…
View detail
It can be used normally
I think it looks good.
I've been using it with leds in it.
It can be used normally
I use it as an OEM substitute because it is easy
I haven't measured the optical axis, so I don't know.
It's good enough to use if you don't have a car to inspect.
View detail
Let's save up before it's gone.
I bought this for the exterior of my 2012 PCX.
It's not that it was cracked, but I bought it because I thought that the day when I can't get the exterior at this price is near because SmallWound and Crack are seen in some places due to too much severe environment and new PCX is coming out rapidly.
[How is it used?
It looks like the current exterior will hold up for the time being, so it will be fertilized by Chest for a while.
Was the one you received as per Image?
I was surprised that the paint was more solid than I had imagined.
Lame processing? If you don't compare it well, you can't distinguish it from OEM.
Was the installation difficult?
I haven't installed it yet.
However, the claws that hold the Cowl in place are really easy to break, so if you're planning to work on it, please be very careful!
[Included Parts:were they on?
It came with a large piece of corrugated cardboard. (PACKING)
If you could just sum it up for me...
[Was there anything that disappointed you?
It was better than I was expecting.
If I had to guess, I'd say 、、、、 Ummm...
Other items that would be helpful
Items to buy together
→ Let's buy a lot of things together at this time.
View detail