Reviews
brake light stop pressure nut
Stop pressure nut, brake light from GOODRIDGE is a nut that is used for BREMBO and other brake pumps that have a threaded spool with a fine thread. then the brake light will turn on (Need to connect the wires first) GOODRIDGE Brake Fluid Stopper is a nut used for BREMBO and other brake pumps with fine thread spiral. When the brake is applied to the red brake pressure to the nut, then the brake light. (Need to connect the power first) (translated by Google Translator) View detail
Fits: HARLEY-DAVIDSON DYNAFamily, HARLEY-DAVIDSON TOURINGFamily, HARLEY-DAVIDSON SOFTAILFamily
Not available
I used paper-type ones, Oil blurs, so I tried it as the first O-ring lip
First of all, the making is slightly larger than the groove to be installed
Oil leaked after installing and running for several hours
I tried to remove it, but it was cut etc.. I could not find it and it fell into the groove
I bought about five so I opened another one and confirmed it, but it was the same
Paper type was better than paper type.
View detail
Easy imechen
XL1200NNIGHTSTER (11) It attached to.
I chose this Handlebar to change the style and position of OEM Handlebar.
OEM→ "Z-BAR 6 Inches with Dent" In the change of Brake hose kind was not extended.
It was really enough to change Handlebar.
Blinker's Sensoretc. There was also no malfunction, there was also a dent, so it was very helpful.
Along with the change of Handlebar, I also installed Mirror downwards at the same time, so the handling around the Handlebar was very clear.
I recommend it because I imechen!
Just changing the Handlebar makes it look like a completely different Motorcycle! Be careful immediately after the exchange!
View detail
Good!
Fit my brembo rcs19 because the switch will cause more than the banjo nut.. It fits snugly and well. Will recommened to all View detail
Good product if you care about the appearance.
I installed it in the outside Tank.
Accuracy etc. Although it is fine without thinking, whether the material is soft, when tightening gum Tapeetc. If you do not paste it will get scratches. Also on. off also moves with a light force so it will move if you catch on something beat.
As it is a very compact Cook, narrow place etc etc. The advantage that you can use is also very good.
View detail
You can use it carelessly
I used it for KTM 125exc.
Because it is used on Off-road it is hard to break with Small Type
It is cheap to sell Repair Parts of Lens! This is good.
Size is also small, so if you can see the minimum, OK
Ideal for use. When I run Course
It is easy to remove.
View detail
Fits: HARLEY-DAVIDSON DYNAFamily, HARLEY-DAVIDSON TOURINGFamily, HARLEY-DAVIDSON SOFTAILFamily
it's the best
We are reworking to respond promptly.
I thought it would take more days to arrive.
I look forward to working with you.
View detail
Fits: HARLEY-DAVIDSON FL Drag pipe 70-84
ShovelFLH's external Tapered Exhaust System was necessary for replacement
I purchased a used Tapered Exhaust System to install it on ShovelFLH.
If it is NORMAL, the Exhaust pipe will hit the Bracket of Step Board..
Normally Normally goes under the Exhaust pipe, but here is the Exhaust pipe
Pass over. However, the hole of the Frame and the thickness of the Bracket do not match,
Adjusted by setting the File by File. Harley's outside parts So,
It is like this. I think that the price is too high for a simple steel bar.
View detail
Exchange from 4 Inch
I was installing 4 Inch of the same item, but it was halfway forward stooping
Exchange for 6 Inch this time.
2-inches The upper body got up and became an easy posture as it became high.
I think that it was better if Pull back was already in the Large Ki shape.
Every Manufacturer has only similar shapes.
View detail
Fits: HARLEY-DAVIDSON FX series 76-88, HARLEY-DAVIDSON SPORTSTERFamily
I think that it is a consumable item
I also used Drag Specialties' Boots (Double the price) However, cracks became conspicuous in two years. I bought this price almost half price. Speaking from the price, I feel lucky for two years.. View detail
Fits: HARLEY-DAVIDSON Universal, HARLEY-DAVIDSON Others
After processing, used as Brake switch of TRIAL car AJP
After processing, TRIAL car (AJP Front brake) I could use it as a Brake switch.
It is necessary to cut Gold part of Switch tip by a few millimeters by File and increase Plastic's bulge part.
View detail
good
Although it is disposable, I always use it because Cost performance is good.
However, it is good if it is important to look good because it is Small, but I think that it is better for high-performance objects to seek performance.
View detail
Fits: HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON Pump head, HARLEY-DAVIDSON TOURINGFamily, HARLEY-DAVIDSON DYNAFamily, HARLEY-DAVIDSON Shovel head
Cost performance High
I use it with BMW R100Series.
There is not conspicuous trouble and good use feeling.
It was a good look for me.
Plug's TerminalCap is not attached so you need to be careful when changing from OEM code.
View detail
Fits: HARLEY-DAVIDSON FX series 76-88, HARLEY-DAVIDSON SPORTSTERFamily
I think it's good.
I bought it for preparation of Restore.
I searched for various things, but I was glad I could buy it cheaply.
I am looking forward to new things because it is so badly degraded.
View detail
I think it's good.
I purchased it for preparing Restore.
I searched for various things, but it was good that I could buy good goods cheaply.
I would like to take care of you in the future.
View detail
Fits: HARLEY-DAVIDSON SOFTAILFamily
I do not feel both texture and quality
Rubber itself is cheesy just because it looks awkward, Rubber deteriorated without installing half a year since installing, the bellows broke and a hole opened.
By the way it is a garage storage..
It would be better to take a little more and buy other goods of Manufacturer, it was a loss of cheap buying.
I bothered to go to the shop and bought it, but the response at that time was bad, I will not buy it again.
View detail
I have not burned the fuel yet.
I bought it to prevent the Garbage from entering the carburetor. I am using decomposition formula, but I am looking forward to how much disposable it has. It is attractive because it is cheap. View detail
Off Classic of a car?
Durable and long lasting with Compact.
In other Manufacturer "Unbreakable lens" It is sold under the name of, it will not break according to its name (Lens is a Screw expression so it can be loosened and taken off - - )
Design that does not feel uncomfortable with Off-road motorcycle Design, cheapest!.
Off When you get lost for Blinker with a car you can not get out of this item.
View detail
Fits: HARLEY-DAVIDSON FLH, HARLEY-DAVIDSON FXD DYNA SUPER GLIDE, HARLEY-DAVIDSON FX series (Rear) 73-99, HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON FXR SUPERGLIDE, HARLEY-DAVIDSON TOURINGFamily, HARLEY-DAVIDSON FXWG 80-99, HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON DYNAFamily
Okay with DIY!
Guts Chrome : A25-1002
Wheel bearing&Seal set
Base car is HarleyFLST-C 1992 formula which is open to my motorcycle.
It is exchange use to Front hub.
In the feeling that I saw the goods, the packaging is solid and the turning work is polite finish.
For many years (60,000km) And weight - It took a burden by Lowdown, Jack-up and turning Tire feels gorigori, feeling of running also had a feeling of strangeness so I exchanged it.
When searching with Net, Harley's TaperBearing exchanges require expert knowledge - Technology - It says that Special Tools is necessary. Axle Shaft needs tightening and special technology called Endless play using Shim.
Previously Hub bearing of CB 1000 SF (Not TaperBearing) I challenged to rely on my experience of having exchanged several times.
"Work process"
? Remove the Tire wheel.
? Fixed obliquely in a solid place and slimmed with a slotted screwdriver Quantity : Pair (for Left and Right) Pull off the Oil seal by prying it so as not to hurt the hub. It does not matter if it is broken because it is not reused.
? Remove Grease wiping out Shim and remove Inner Bearing and remove the included Color. ? Prepare a new Inner Bearing and place it in the palm of Grease (I use commercially available Molybdenum grease instead of OEM) And load it into Roller.
? When looking at the Outer lace from the opposite side, we are about 3 mm faces, so we will beat Large in Large with Slotted screwdriver of Large grinding. At first there is no reaction but when you hit the average you gradually get out. Do the same for the other side.
打.
? Insert Color, insert Inner Bearing, put in Shim, put Oil seal on old Outer lace and strike down to the surface and installation is completed.
? When incorporating, pay attention to Shim so that Axle Shaft will be centered. Tightening Torque (81-88 Nm) Use Torque wrench to tighten.
If you reuse the number of Shims in and tighten it with the prescribed Torque it is unnecessary to have troublesome Endless play.
In case of Aluminum hub, it seems necessary to use Special Tools for sampling.
I built it in the car body I tried it by hand, but even if I rocked, I lost my backlash and turned around very smoothly.
I tried run but it is a very good fee Ring.
◎ Because it is amateur work to the last, please work at your own risk.
"Required tools etc etc. "◎ Jack ◎ LargeSmallSlotted screwdriver ◎ Dustcloth ◎ Molybdenum grease ◎ Torque wrench ◎ 1 / 2-inchesGlasses - 17mm piece
It is recommended in cheap and very good products.
I ran around 2,000 km and Jack-up and tried it, but without any backlash, it turned around smoothly. There seems to be no problem.
My friend also succeeded in exchanging before and after Bearing. It is recommended to change to Large because it is enough for DIY work.
View detail
Fits: HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON Shovel
Primary oil will not leak
Primary oil leaked, so I replaced it for a new one. As of now, Pitato Oil ceased to leak. Waiting for a while. I hope it will be a little cheaper as it is a consumable item. View detail