Reviews
It is good to exchange easily at low price.
Because OEMFootpeg Bar is slippery and the feeling of Fit is bad, I exchanged this item, Shoes's Grip power is very good and Cornering is safe in the middle. View detail
Fits: KAWASAKI ZX-25R, KAWASAKI Ninja 250SL, KAWASAKI Ninja 250SL
Ninja250 (2 cylinder 2015 years) It attached to
Ninja250 (2 cylinder) At Front 16 mm, Rear 25 mm Down.
It is for Ninja 250SL, but Ninja 250 (2 cylinder) Because I did not have Short Stand for.
When it is the shortest, it is 3 cm shorter than NORMAL.
It makes a fine length, so it will be a good length. The ground plane did not become parallel to the ground, but it is about no problem.
It is heavy with adjustment formula 663 g for NORMAL 459 g. Is it the weight for strength?.
I am happy that the gold price is a bit cheaper.
Ninja250 (2 cylinder 2013 ~) It is Recommendation to people who are Lowdown by!
View detail
Price suitable
I wish Bolt for installation was included and included.
Although making was Simple, I did not have instructions and so on, but I think that it can be installed easily.
View detail
YOSHIMURA's Silencer - - -
Purchase to use for YOSHIMURAExhaust System of KLX 250.
The shape of Silencer is inconvenient, hits at Limit and does not attach - -
Probably not, return to Normal muffler, use with D-TRACKER.
Can be installed without problems with DAYTONA's Exhaust System.
Some Silencer required processing.
View detail
With this I am relieved
Exhaust system outside the company from the time of second-hand purchase. I did not know that OEMExhaust System doubled as reinforcement.
The position of the mounting hole is Exactly and it is a product of unquestionable precision.
Since installation Bolt is not attached, it must be troublesome to be prepared.
View detail
I returned it..
Since the ground plane of Pad and disc is too Gap, the edge of Pad will remain undiminished, so if there is no Maintenance properly there is a possibility that Brake will not work. View detail
Good for a bit of commitment
Other AISCancellationItems are also sold at cheaper ones. The lid on the engine side of K & T was made fancy so select this. I wrote to cover the Hose in the Instruction Manual, but I wanted to lid directly on the Air cleaner Box side, so I closed it with the Pipe end cap 13 mm of Home center. Would you like to make the lid on the engine sticky? I think that you want to consider purchasing depending on whether you want to make it a simple Plate. View detail
I was able to install it without problems on KLX 125.
I installed it in KLX 125.
I was disgusted by the OEM's cheapness and I searched for various things, but since it was only about 10,000 yen for Hit for KLX, there was only Silver in color, so I searched with D tiger and found this and immediately buy it did.
It is natural because it is a brother car, but it was able to install without any problems.
View detail
It's a good Parts.
OEM's Hanger is just a cheap iron plate!
Although I searched for various things, the other items were only around 10,000 yen in the row, and only the color was Silver, so I decided on this without hesitation.
View detail
If it is cheaper it's best.
I used the CD50 Engine on MONKEY and added Bagfootpeg to use it for making a positive change. With no processing.
It's a little expensive, so I'm happy that it's less expensive and simple processing and cheap.
I feel that texture and accuracy are natural at this price.
View detail
I could also use it for SRX.
Screw of an old Rear Sets' Change arm which does not have Repair Parts became foolish and it became impossible to conclude, so I was looking for an alternative one.
- Those having a length of 40 mm
- Change arm's Offset amount is appropriate
While looking for these two points as the axis, this product was Hit.
There was no guarantee that it could be installed, but when you purchase it with a bet, the Spline diameter is Exactly. I was able to install it safely.
Change rod It is good to choose Offset of the attachment part.
You can set Short to Short change with Short Stroke comfortably.
View detail
Fits: KAWASAKI D-TRACKER125 [D-Tracker125]., KAWASAKI D-TRACKER125 [D-Tracker125].
Performance higher than imagined Up
It attached to D-TRACKER 125. Go straight ahead - Corner ring stability (rigidity) , The quietness became both Large and improved. It does not compare with OEM Engine hanger. I was very satisfied.. Incidentally, the weight is 250 g OEM Product, this product was 270 g. View detail
To secondary air Cancellation!
WR250R 2015MODEL
I bought it for secondary air Cancellation.
Installation was easier than I thought.
However, as I forgot to prepare the Engine side Gasket, I used it only there but it was not a problem.
It is even better to have such fine parts included.
It was supposed to cover the last Pipe of Valve if it was an instruction manual, but since Pipe to Air cleaner is long, it is unbelievable, so Cut it in the immediate place and closed the lid.
We also removed the secondary air valve body and made EngineLeft Side clearer. Wiring also handled Waterproof and so far there is no problem.
View detail
Chain guard
I bought the shape looking for Chain guard. Installation is simple because it removes NORMAL and attach it. I attached it to KLX 250, but since the shape extends to the Chain Adjuster side, if the scale of Adjuster gets bigger Large, it will collide. Well to fix the Guard Bolt to chew Washer Bite a little attachment can change if you change the position, but a bit disappointing.
View detail
Fits: KAWASAKI D-TRACKER125 [D-Tracker125]., KAWASAKI D-TRACKER125 [D-Tracker125].
Succeeded in weight reduction of suspension
It is light, but there is no sense of high class.
There is more than OEM
I do not want to pinch my feet when I fall
So it is not possible to reduce weight by removing OEM.
I have heard of Bikers
This is lighter than a few sentences
View detail
Fits: KAWASAKI D-TRACKER125 [D-Tracker]., KAWASAKI D-TRACKER125 [D-Tracker].
Sounds good
I happened to have installed NSF 100's Wheel cheaply at Yahoo auction (Finally I got stupid, but w)
When installing There is no meaning of the instruction manual, the drawing of the incoming Color and the size of the thing are different (thickness 12. It should have 5 and 14 but 14 is Quantity : 2pc. I'm including Set) I did not write the orientation of Front color
Finally installed as trial and error like a puzzle w
I think that things themselves are good, in my case they did not need to be machined (it still took about 5 hours)
View detail
Down Exhaust System
Who wants to add Down Exhaust System
If you do not turn this on, Frame cracks
To fall. Let's put it before it gets it
Also, even if it is not Down Exhaust System,
It is better to attach this to the Exhaust System becoming
View detail
Brake reinforcement & Dress-up
Because the OEMRotor has been exhausted, I tried replacing it with a Rotor with a large diameter.
Regarding the installation, I was worried about the handling of Brake hose, but it was installed easily.
However, since the attached Bolt was a little short, I changed it to a long one.
Without this ...
The feeling of running is more effective than OEM, and the impression that it became easier to control.
Although Brake Pads was a brand-new OEM Product, I did not think that I could feel it up to here.
Red alumite's Bracket also has a presence, and it looks better as well.
View detail
To reinforce Seat rail
Purchased with change of Exhaust System.
Originally, I missed 1 pc fixed Bolt of OEM's Exhaust System, already the frame was distorted, so I reinforced using this product.
Since it was lifting the Seat rail even even with the OEMExhaust System, I attached it while raising the frame when attaching it.
D - TRACKER 's Seat rail is weak, so if you do not reinforce with this product I think that distortion will gradually increase.
With moderate thickness, Bolt could also be used as it was a satisfactory item.
View detail
Fits: KAWASAKI D-TRACKER125 [D-Tracker125]., KAWASAKI D-TRACKER125 [D-Tracker125].
It is purchase for the Dress-up purpose up.The Design is simple, and is smaller than an original manufacturer's product, and splashes of the oil after supplying with oil, in order that there may be no Guard of the Chain upper part worry it.attachm
It is purchase for the Dress-up purpose up.The
Design is simple, and is smaller than an original manufacturer's product, and splashes of the oil after supplying with oil, in order that there may be no Guard of the Chain upper part worry it.
attachment is only fixed to a Simple with two Bolts, although descriptions do not have anything.In the case of, it did not suit slightly, but by the Leutor, the Pitch of the hole deleted the hole in the cross direction, and still enlarged.
Although put a little effort, as goods, it is satisfactory.
View detail