Reviews
Fits: KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1 (900SUPER4), KAWASAKI Z1000, KAWASAKI Z1000 MkII, KAWASAKI Z1000J, KAWASAKI Z1000R, KAWASAKI Z1100GP, KAWASAKI Z1100R, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z750FX, KAWASAKI Z900 (KZ900)
Z1R
The Chain Adjuster on my Z1R was dirty and I was concerned about it, so I replaced it at the same time as the Axle Shaft. I am not sure how well it works, but I am Large satisfied with my car which is getting cleaner and cleaner. View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Comparable to OEM Products
[How is it used?
OEM Product was damaged.
Was the one you received as per Image?
The workmanship is so good that it is indistinguishable from OEM Product
Was the installation difficult?
It was easy to replace with one Spanner.
How was your experience with it?
Comparable to OEM Products
[Included Parts:were they on?
There is none
[Was there anything that disappointed you?
There is none
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
For homemade Chain slider.
The processing was easy and the Material feel was good. I'm not sure why it's a trapezoidal shape, but if it's supposed to be processed, it should be a regular rectangle…If there was a cheaper one without Rivet, it would be great. View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
It does not work with the Swing Arm made by SHIFT UP
It was going to be used on a 15cm Long Steel Swingarm made by SHIFT UP
As it turns out, it wasn't available
The Swing Arm by SHIFT UP has a triangular plate on the pivot and arm part It is welded
Large cut construction for reinforcement, but it's also a good choice for OEM products and the CHINA Swing This is a reinforcement plate that Arm does not have
The Chain Slider for OEM Swingarm I purchased this time is a MONKEYOEM Like the Product, the structure of the Swing arm pivot part is covered with the Swing arm pivot I am
SHIFT UP 15cm Long Steel Swingarm with this Pivot Because of the reinforcing plate in the part I mentioned earlier, the Bolt could not be tightened and fixed
I thought about cutting out just the interfering parts of it and using it
I actually cut it out, but there is no way it can be fixed firmly because it is a thin made of rubber No, I dared to sink …
It's 500 yen, so I gave up gracefully because it's a cheap price to pay for a study
Maybe drilling a hole in the Swing Arm reinforcement plate would have solved the problem, but I was not confident that I could drill a hole in the middle of the road hellip;tears
As the product name suggests, “Chain Slider for OEM Swingarm& rdquo; So, if you want to use it on the Swing Arm made by other companies, just in case you want to use it on the Swing Arm It is recommended that you check the shape of the side
View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Comparable to OEMParts
I installed it on AB27MONKEY's SHIFT UP 5cm Long Swing Arm
It is firmer than OEM Parts, but I didn't mind it too much
In my case, it's only 5cm, but the chain length (Swing Arm length) I would recommend it to anyone with a growing
View detail
Fits: KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1 (900SUPER4), KAWASAKI Z1000, KAWASAKI Z1000 MkII, KAWASAKI Z1000J, KAWASAKI Z1000R, KAWASAKI Z1100GP, KAWASAKI Z1100R, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z750FX, KAWASAKI Z900 (KZ900)
As good as OEM Products
By replacing the old chain slider with one made by PMC, the smallness of the chain slider was reduced to the MK2 The parts are new and the footing is tighter and I am satisfied with the product View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Chain slider
I tried attaching to Swing Arm because there was a trace of Chain rubbing. I do not know if friction has decreased or not, but I feel better than nothing. View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
4.0
When MONKEY's Swingarm was painted, the part of Chain slider was scraped and rust was generated, so I used this product.
The resin was not too hard, and it was easy to install.
View detail
Fits: YAMAHA YZ125, YAMAHA YZ125X, YAMAHA YZ250, YAMAHA YZ250X
It is cheap and saved
I was saved because I got cheaper than OEM Parts Number, but making is a price.
Is not it good for those who want cheap?
But it is a pleasure to have handling in the old Motorcycle like me.
View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
It can be installed easily
I arrived at SHIFT UP 6 cm Long, I can install without removing the Swingarm as well as the state as it is and the Generator cover as it is Material is certainly soft but Just fit makes it firmly
I also expect durability
View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Because it is cheaper than OEM ...
Purchase to prevent Swingarm from shaving when Smalling MONKEY's Driven Sprocket.
Our 4. It seems that we can divert FIMONKEY 's OEMChain slurder to 5 l MONKEY, but because it is expensive, we purchase the Other Company Product.
Underbody - Tire is NORMAL, before 16T - In the 28T state afterwards, the color of Swingarm was peeling, although very slight.
I made it to 26T after the product was installed, but it is unconfirmed whether it works. However, since I hear a sound that I have never heard before from the Pivot part, I think that it is effective. Even if there is no effect, there is a sense of spiritual security.
It is fine that it is inexpensive, but even if it's very easy "Handling Instruction Manual" It will be helpful if you attach it to (I installed Crankcase Cover but removed, did not it have to be removed ...?).
View detail