Reviews
Fits: HONDA CRF250R, HONDA CRF250RX, HONDA CRF450R, HONDA CRF450RX, HONDA CRF250X, HONDA CRF450L, HONDA CRF450X
The Swing Arm side was distorted and it was very difficult to install,
The hole positions are the same as OEM, but the thickness may be different, and I had a lot of trouble with the gap in the hole positions when actually installing the product.
As a result, a workaround was to reuse the OEM Bolt. The bundled Bolt could not be used.
However, since the body was used and there were signs that the underbody had been hit, it was a little difficult to tell.
The product itself is secure with a Rubber underside to release impact, and it seems to avoid the Trouble that OEMs would quickly distort.
The product itself is usable, and the installation is a bit of a lost cause, so I gave it 4 stars.
View detail
Focus on appearance
It is for bonsai.
Chain may need to be adjusted as it becomes taut.
Installation was somewhat difficult due to the stiffness of the Slider.
Quantity, not before/after:Pair (for Left and Right) I put it on and it went on easily.
View detail
Fits: HONDA CRF250M, HONDA CRF250L, HONDA CRF300L RALLY, HONDA CRF300L, HONDA CRF250RALLY(S), HONDA CRF250RALLY, HONDA CRF250RALLY, HONDA CRF250L(S), HONDA CRF250L
Recommended
[How is it used?
Dress-up
Was the one you received as per Image?
Yes
Was the installation difficult?
Easy
How was your experience with it?
Wow that's cool
[Included Parts:were they on?
(after the -te form of a verb) not ..
[Was there anything that disappointed you?
(after the -te form of a verb) not ..
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
It's an easy exchange.
I like the price compared to OEM. View detail
Chain Guard
It is almost bonsaiParts. It looks good. View detail
For forest roads
I bought it because I often go to the forest road.
I think it will be effective, but when changing Tire, etc.
It may be a hassle to remove it,...
View detail
Chain slider
I think it would be better if other colors were available. View detail
Fits: HONDA SUPER CUBC125, HONDA MONKEY125, HONDA DAX125, HONDA glom, HONDA CT125CT110 HUNTER CUB, HONDA HRC Grom
Necessities
[How is it used?
I bought it because I replaced it with a 16T.
Was the one you received as per Image?
Street Image
Was the installation difficult?
it's simple
How was your experience with it?
It can be used normally
[Included Parts:were they on?
Instruction Manual was available
[Was there anything that disappointed you?
None
Other items that would be helpful
With installation points and hang instruction manual
View detail
Fits: YAMAHA YZ250, YAMAHA YZ250, YAMAHA YZ250, YAMAHA YZ250, YAMAHA YZ250, YAMAHA YZ250, YAMAHA YZ250, YAMAHA YZ125, YAMAHA YZ125, YAMAHA YZ125, YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ250, YAMAHA YZ250FX, YAMAHA YZ250FX, YAMAHA YZ250F, YAMAHA YZ250F, YAMAHA YZ250F, YAMAHA YZ250F, YAMAHA YZ250F
Made with care by GYTR
It was a great help to me because there are not many places that sell them. I've been using it for a few years now, and I'm very happy with it. 。 There are similar products made by other manufacturers, but I chose this one because it is an OEM product made in North America, and I wish the price was lower. View detail
Fits: HONDA CRF250M, HONDA CRF250L, HONDA CRF300L RALLY, HONDA CRF300L, HONDA CRF250RALLY(S), HONDA CRF250RALLY, HONDA CRF250RALLY, HONDA CRF250L(S), HONDA CRF250L
This product is all about looks.
The function is the same as NORMAL, but the appearance is much more upgraded. View detail
Chain Slider installed!
I removed the existing Chain Slider and installed the ACERBIS Red one, it was a little difficult to get the bolt through, but it went on without a hitch. I'm not sure how effective it is, but it looks cool! This is my second custom. This is my second Custom. View detail
Fits: HONDA CRF250M, HONDA CRF250L, HONDA CRF300L RALLY, HONDA CRF300L, HONDA CRF250RALLY(S), HONDA CRF250RALLY, HONDA CRF250RALLY, HONDA CRF250L(S), HONDA CRF250L
Cool!
21New ModelRALLY50 also came with this kit, though it was not in the list of applicable models.
The OEM Chain Slider is all molded in white, which makes it stand out and gives it a bad parenthesis…but if you change it to this, you can get a custom look and feel.
However, it took a bit of time and effort to install, unlike other Parts that you can just replace. But it's not difficult.
There are a lot of Parts out there for the CRF from Jita, but this is the most RECOMMENDATION!
View detail
It's a must for the beast!
The Chain of SEROW, which often misses on hard beasts, will no longer miss!
It's great except it's a little heavy! (^-^) /
View detail
Installation is harder than you think.
The Bolt must be turned with Hexagonal wrenches with Screw Locking Agent. View detail
It's not bad, but it's going to be too chain taut.
It's not bad, but the Chain is binned, so it needs to be adjusted.
I installed it on my WR250X which I use for road race. To be honest, I don't need it, but I installed a Sprocket guard in the Race's Regulation. It's essential, so I quit the heavy OEM and replaced it with this one.
The Slider is made of resin, so it's good that it's going to be scraped off, but it's not too heavy. Isn't that right, Chain? It was like.
It worked fine
View detail
If you want to be lightweight, you don't RECOMMENDATION
I don't have a picture of the product Image, so I was prepared to buy it in a human column.
Until it arrived, I was wondering if they had finally released a product that uses the same Guide block as other models. I was quite disappointed that the one I received was made completely differently.
I didn't measure it, but I think it weighs about 300-400 grams. I was thinking of going straight to the Yahoo! market before I installed it.
As you may know, the owner of the SEROW and XG250 TRICKER chain The slider attachment area is not very solid. This Chain Slider is made by contacting the Plate on the inside of the Swing Arm to gain strength. I like the fact that it's there. This isn't going to break right away if it falls over.
I'm using Sprocket with a 520 42 gun and it installed with no problems.
I tried running lightly and the slide is smooth and uncomfortable.
I wrote that Parts is heavy, but I couldn't feel the weight when riding it in layman's terms.
The disadvantage is that the price is almost twice as high because the parts are not shared with other cars, and there are a lot of Gold Parts. It has a heavy weight point.
The thing itself is solid and very good for the price and weight of the Neck. It also gives a sense of unity with the Guard.
However, if the same type of chain slider as other models is released, we will not hesitate to switch to it! I think.
This time I bought it to try it out because the OEM Parts were broken, but before I bought it, the shape and weight of it was I don't think I would have bought it if I had known. I looked it up to see if it had just been released, but I couldn't find a single image of it.
Please Web!ke please add Image photos as soon as possible.
If you are buying a motorcycle, you should consult with your own motorcycle riding style before you buy one. I think. And it doesn't come off the chain that much.
View detail
Fits: HONDA CRF250R, HONDA CRF250RX, HONDA CRF450R, HONDA CRF450RX, HONDA CRF250X, HONDA CRF450L, HONDA CRF450X
It is a good item ( ??? )
It looks great and I'm happy with the way it looks and functions (o^^o) ??
Cost was also good to buy at the right price
We hope to see more from ZETA in the future! ( ??? ) 。
View detail