Reviews
Fits: SUZUKI GSX750S Katana, SUZUKI gsx1100s katana (sword), SUZUKI GSX750S Katana, SUZUKI gsx1100s katana (sword)
Looks good
If you replace the OEM dirty one, it looks good and feels good to have a beautiful one.
As mentioned in the impressions, there is some stainless steel burn, but it can be removed by polishing, so there is no problem.
View detail
I put it on my New Model GSX1300R HAYABUSA.
It's cool. I think that's all there is to it. View detail
Fits: KAWASAKI NINJA250R, KAWASAKI NINJA2 Helmet50RR, KAWASAKI Ninja250
Fits a 2020 NINJA2 Helmet 50R
2020 NINJA2 Helmet50R (EX250P) attached to the
I'm just replacing it with OEM Product
You need to remove the rear shaft.
You will need the appropriate tools and other equipment.
If you are unsure, it is better to ask an expert.
The item is well made and the color is good.
I'm satisfied with it, but I think it's a bit expensive for a dress-up product.
I bought it this time because it was made by AGRAS.
If it is made by Posh, it is less than half the price of Gold.
I think it's enough there.
View detail
Fits: YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ250F, YAMAHA YZ450F, YAMAHA WR250F, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR450F
For chain tension adjustment and dress-up
I bought this because the OEM Axle Block was distorted for some reason and it was hard to see the memory when adjusting the Chain. The result is very good, the chain adjustment is easy to understand and it looks good with Accent design. I wish the price was a little lower. View detail
Convenient
I don't see many motorcycles with LighTech:LighTEC, but I think LighTech:LighTEC products are good in design and functionality.
Chain adjustment can be adjusted well.
View detail
Fits: KAWASAKI NINJA250R, KAWASAKI NINJA2 Helmet50RR, KAWASAKI Ninja250
Fits a 2020 NINJA2 Helmet 50R
2020 NINJA2 Helmet50R (EX250P) attached to the
It is easy to replace with OEM Parts.
These are dress-up parts that only change the appearance.
I think the product itself is well built.
View detail
SUZUKI “Amazing"
It's not related to driving, so here's my impression after installation
If you have the right tools, you can install it with just a few clicks.
What's so great about it?
The Bolt head of the Adjuster is embedded in the Body, so you can adjust the tension of the Chain and adjust the
All you have to do is to position the Adjuster properly, fix it with the Bolt and tighten the Axle Shaft.
When you tighten the Axle Shaft, the tension of the Chain is reduced.
Does it change or shift position?
This adjuster doesn't have that! It's a one shot deal!
The hole in the Bolt's head looks hard to use, but once you get used to it, it's not so hard. You can tell by using it.
Good product.
View detail
It's quintessential GCraft quality.
The Axle Nut came loose and I lost one of the Chain pulls.
I bought this product as Repair Parts this time.
The quintessential GCraft quality, with a premium feel.
Well, the price is high, so it is natural to have a sense of luxury, but
I think that is proportional to the Owner's satisfaction.
In fact, I'm very happy with the quality of the product.
View detail
What a tease.
Normal chain adjuster was useless in RustRust, so Material:I chose this one because it is Stainless Steel and seems to be very durable.
It supports normal chain, but in fact, it has an interesting mechanism.
good point
■Material:Because it is Stainless, it is stronger and more durable than NORMAL.
Just replace with Normal chain adjuster.
Chain can be adjusted by the length of the Smallest Chain.
In other words, the characteristic of being →Response-oriented with as little play as possible.
A bad point
None
I thought it was a normal interchangeable product, but it is a karakuri that can always keep the best length and deflection of Chain at that time.
So it always feels good to ride.
Isn't it great that Chain is an Image that you can adjust steadily and match by yourself, but there is no such thing.
So that makes every ride more fun!
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA DAX, HONDA CHALY 50
The length of the Axle Shaft is not enough.
I thought I could install it right away, so I pulled out the Axle Bolt without curing the wheel. When I installed the AxleBolt, I found that the Ring part of the Chain Adjuster was too thick and the Axle Shaft was not long enough. I gave up using it in the end... I don't know why they sell products that can't be used, but it was a pity... I think it was a bad idea to order it without thinking about the size etc. because it was a compatible part... Please be careful when you order. View detail
Great product
Makes chain adjustments a breeze - just loosen the axle and give one click to each adjuster and re-tighten axle. Job done. Product is very well made and I will be putting them on all my future bikes because of how easy it makes adjustments. View detail
Fits: HONDA DAX, HONDA MONKEY, HONDA CHALY 50
Swing Arm Protection
Wound prevention and to prevent the paint from peeling off. View detail
Fits: HONDA DAX, HONDA MONKEY, HONDA CHALY 50
For Swing Arm protection
I use this because the paint peels off. View detail
Fits: SUZUKI GSX750S Katana, SUZUKI gsx1100s katana (sword), SUZUKI GSX750S Katana, SUZUKI gsx1100s katana (sword)
It's a shame
I was confused with other products, but I decided to use Onospeed with reference to the price and other people's reviews.
When I checked the product, the mounting part of the Nut was burnt weld and was completely black,...
That's a shame, I treated it with Compound to polish it up.
There was another BALI on the One Side where the Axle Shaft goes through,...
Processed by Bar File.
The rest of the dimensions were perfect with no heat deformation from welding.
If the details were handled, the Design would be great and it would be a perfect product.
I hope the quality will improve.
View detail
Fits: SUZUKI GSX750S Katana, SUZUKI gsx1100s katana (sword), SUZUKI GSX750S Katana, SUZUKI gsx1100s katana (sword)
Ohno Speed Stainless chain pull
Material:The texture peculiar to Stainless Steel is astringent and Parenthesis is good.
The BALI, chamfered, is a solid product and a finish that will satisfy the Gold genus fetishist.
However, the cost performance is low.
View detail
Chain adjustment is a breeze!
You can adjust the chain quickly, the center won't go out of whack, and the click is easy to hear. The price is a bit steep, but if you don't pay the big price, this is a recommended product.
I also installed the optional Stand Hook. I'm glad I chose the red color to stand out.
View detail
Fits: HONDA DAX, HONDA MONKEY, HONDA CHALY 50
Restore to the DAX.
It was installed to protect the Swing Arm.
I don't want the paint to come off with Axle adjustments.
Demerit is recommended for nothing.
Manufacturer's preferences are different for everyone.
View detail
Chain pull is so easy!
It took us a while to get them back, but that's ItalyQuality
The construction is very clean.
I used to use GILLES TOOLING's Adjuster.
If you want to make fine adjustments, I think it's Gills, and if you want to have fun and adjust, this is it.
By the way, you can use Pad of Gills because Pitch between Screw is the same.
Installation is at your own risk …
I personally wish that I could have chosen Titaniumium color or some other meek color …
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA CHALY 50, HONDA DAX
One word:cheap.
I bought it for the purpose of diversion. I'm using it on my DREAM50Swing Arm. Although there is no problem as the original usage, it is necessary to pay attention to the thickness of the Nut because it is thicker than OEM. My own was not a problem. View detail
Fits: HONDA DAX, HONDA MONKEY, HONDA CHALY 50
It's CHALY
I think that if the detail parts are beautiful, the whole is tightened up.
I messed it up when I put it on... I cleaned it up with Parts cleaner afterwards!
View detail