Reviews
Fits: HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 70, HONDA Super Cub 90, HONDA little cub
Replaced with Tire Replacement
The Super Cub custom had over 60,000 km on it and at the last tire replacement, the dust seal was coiled, so the bearing was replaced as well. View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
สินค้าคุณภาพดี การบรรจุเรียบร้อยส่งใด้รวดเร็ว View detail
Fits: HONDA Ape 100, HONDA Ape 50, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA NS-1, HONDA NSR50, HONDA NSR80, HONDA Ape 100, HONDA Ape 50, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA NS-1, HONDA NSR50, HONDA NSR80
Safe products
I replaced my MONKEY front and rear Axle Shafts with new OEM ones and I bought these to go with them.:There are some parts which are sold cheaply with the set, but I made the front and rear OEMAxle Shaft in the priority of safety. I use it without a problem because it is a normal Nut, but also has a stopper for loosening. The price is also very reasonable and helpful.
I'm glad I bought this part because it is a part that requires more security cover than it looks.
View detail
CF POSH Bearing
After 10 years of operation of the maxiscurator, the grease dried up in the drain bearings and they became unusable. A play appeared on the wheel. I replaced them with Koyo bearings. I need to remove old ones and put new bearings on the wheel’s hot disk, it must be heated with an electric hairdryer. After replacing the bearings Koyo passed 5000 km without any problems. View detail
Fits: HONDA Ape 100, HONDA Ape 50, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA NS-1, HONDA NSR50, HONDA NSR80, HONDA Ape 100, HONDA Ape 50, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA NS-1, HONDA NSR50, HONDA NSR80
For Blinker installation
I bought it to install PMC's Blinker Bracket for MACH
I couldn't find this size at home center and it's the cheapest, so I chose this one
No glitches. It's just a regular good Nut
View detail
Because Rear Wheel Collar was scraped
I was also worn out and exchanged with Axle Shaft. I'm wearing GInker's 8Inch4jWheel at G Swingarm, but in my case this color interfered and did not enter. Sharpened with a lathe. View detail
Fits: HONDA Ape 100, HONDA Ape 50, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA NS-1, HONDA NSR50, HONDA NSR80, HONDA Ape 100, HONDA Ape 50, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA NS-1, HONDA NSR50, HONDA NSR80
[Webike Monitor] Exchange with the original manufacturer's product. Slack is prevented with U Nut with the Friction ring.
[Webike Monitor] Exchange with the
original manufacturer's product.
Slack is prevented with U Nut with the
Friction ring.
View detail
Fits: HONDA Ape 100, HONDA Ape 50, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA NS-1, HONDA NSR50, HONDA NSR80, HONDA Ape 100, HONDA Ape 50, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA NS-1, HONDA NSR50, HONDA NSR80
It is the structure of preventing slack similarly pure. Since the slack of the Axle Shaft under run is dramatically dangerous, it considers that it is better to exchange together in the case of tire replacement. By a two-piece Set, since a price is also
It is the structure of preventing slack similarly pure. Since the slack of the Axle Shaft under run is dramatically dangerous, it considers that it is better to exchange together in the case of tire replacement. By a two-piece Set, since a price is also cheap, I think that it is good. View detail
Fits: HONDA Ape 100, HONDA Ape 50, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA NS-1, HONDA NSR50, HONDA NSR80, HONDA Ape 100, HONDA Ape 50, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA NS-1, HONDA NSR50, HONDA NSR80
Since it is a nut of locking, there is no fear of loosening by vibration, and it can feel easy and use it.
Since it is a nut of locking, there is no fear of loosening by vibration, and it can feel easy and use it. View detail
Fits: HONDA Ape 100, HONDA Ape 50, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA NS-1, HONDA NSR50, HONDA NSR80, HONDA Ape 100, HONDA Ape 50, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA NS-1, HONDA NSR50, HONDA NSR80
Honestly the product here is too cheap. . . The cfc axle and rear axle of the super cub 110, and a pivot shaft (swing arm shaft). The flange nut of M12 (P:1.25) is being used for the above three shafts!!! A small motorcycle has much freque
Honestly the product here is too cheap.
.
.
The cfc axle and rear axle of the super cub 110, and a pivot shaft (swing arm shaft).
The flange nut of M12 (P:1.25) is being used for the above three shafts!!! A small motorcycle has much frequency of the Tyre exchange.
.
.
If it is repeated, the rust prevention of a pure flange nut will be inferior.
(By contacting a tool, it is for uniqlo plating of a pure nut to exfoliate.)
.
. It becomes indispensable that the direction which owns the super cub 110 reserves the product here since it is).
Of course, the function will be lost if U lock nut (KATACHI of feather located in the female screw partial upper part of a nut was imitated stop loosening preventing function) repeats desorption.
(It is about two desorption and the effect is falling!!!) It is a fault of U lock nut for long-term use to be impossible.
It will be (1) if long-term use is carried out. : Anti-corrosion performance falls and it is (2). : The function of a slack stop also falls and it is (3). : U Locke's feather will hurt and keep an external screw portion (damaging).
It cannot be for not praising the product here which puts a true heart and is sold from the posh shrine which knows such a fault!!! An everyday guide peg,
It is an important point which manages a run of the super cub 110 which is an authentic-Japanese-style commuter's male as an offering of leisure,
The M12(P:1.25)U Locke flange nut which is an important point of body construction parts and which connects three above-mentioned shafts,
They are parts which should be reserved absolutely!!! In order to run in a thoroughgoing attitude, the super cub 110 which should be loved,
The product here cannot be disregarded!!! Since it is required parts absolutely, those who own the super cub 110 cannot be in the degree of recommendation, for not estimating that it is the highest!!!
View detail