Motorcycle Wheel Parts / Accessories Reviews

Filter

Write a review and get Webike Points!

Reviews

Wheel Parts / Accessories Clear all

8-Inch Aluminum Combined Wheel for MONKEY

KOOD

17 Apr 2024

Front Axle Shaft

Fits: HONDA CT125 CT110 HUNTER CUB, HONDA CROSS CUB 110, HONDA CROSS CUB 50, HONDA SUPER CUB C125

Japanese Webike user

5/5

The difference is obvious.

I was considering SP Mukawa's Hollow Bolt, but after reading the impressions of this product, my heart was moved.
There was once a time when parts called Front Fork Stabilizer were popular.
Motorcycle front fork with upper and lower Three-Pronged Fork and Axle Shaft with Quantity:Pair (for Left and Right) are connected.
Quantity at the top of the bottom case between the bottom Three-Pronged Fork and the Axle Shaft, which is the longest distance.:Pair (for Left and Right) This is a Parts to increase the strength of the entire Front fork by connecting the
In the case of the CUB, the Three-Pronged Fork is only on the bottom, and the Front Fork is connected to the Three-Pronged Fork and the Axle Shaft in only two places, so it is obvious how much effect an increase in the strength of the Axle Shaft would have.
In addition, the precision of the product (i.e., as close to straight as possible) and the hard plating reduces rotational resistance.
Installation is simply a matter of replacing the OEMParts, so if you have the proper tools, it takes only 10 minutes.
From the moment the installation is complete and the Center Stand is lowered Ale?" I thought
The motorcycle moves forward as if it were on a downhill.
Clearly, the rotational resistance of the front wheels has been reduced.
The feeling of improved acceleration and fuel economy, or the feeling of sticking without Downshift on uphill roads, may be the Brush-bo effect.
While driving, the road surface conditions are now more palpable than before.
It may be that what was previously missed by Axle Shaft deflection is now being transmitted to Direct.
I like this feeling, but some may not like it.
Shaft1 pc is only 1000 yen for OEM parts and 3000 yen for SP Mukawa, while this is over 20,000 yen, and it is not a part that can be seen at a glance, so it is not considered by the dress-up crowd.
The high precision and finish of Parts can be seen just by holding it in one's hand.
I hate putting sticky Stickers on my car, but I was so impressed with how great this Axle Shaft is that I put the included Sticker on the Bottom case.
We recommend it to those who want to ride more comfortably and pursue the original Motorcycle riding style. View detail

Forged Aluminum Wheels M7RS Genesi Front and Rear Set

MARCHESINI

15 Apr 2024

Forged Aluminum Wheels M7RS Genesi Front and Rear Set

Fits: KAWASAKI Z1000 (water-cooled)

Japanese Webike user

4/5

I bought it...

I finally got my hands on Wheel!
And in Marchesini!

At first I was thinking about GALE SPEED or OZ RACING.
Over the past year, Wheel has gone up in price considerably and Gale has lost its value for money.
OZ RACING has become more expensive than Marchesini
470,000 yen for standard Anodized Color, 550,000 yen for Paint
Too expensive.
Marchesini the King in his own value system, the nobleman OZ
I felt like a commoner GALE SPEED.
If they undercut that and the price exceeds Marchesini's, I'd choose Marchesini.
And GALE SPEED's Brand power is inevitably weak compared to other niManufacturers.
Add $140,000 to Gail's GP1S and you'll be promoted to Marchesini.
That Marchesini didn't like 7 Spokes at first and shunned it.
See, 360 degrees around the circle is not divisible by 7.
This means that somewhere out of the seven, there is a disproportionate etc.
It's kind of creepy, isn't it?
The price and design lightly erase such thoughts, a lack of conviction.
As a result, I chose Marchesini's M7RS over Gale and OZ.

Review from here
I knew it was lightweight, but when you actually ride it, it changes more than you can imagine.
The forging and thin Rim make the GYRO effect much weaker.
It feels like the head goes in and falls down without the action of bending it.
It's so light that I'm afraid it's going to fall over as it is.
To be honest, I've seen a lot of these reviews and sometimes I wondered how they could change like that.
I can feel the difference when I feel it. Even I, an insensitive person, can feel the difference so far, so I guess normal people can see the difference, can't they?
There's Merit, of course, but there's also the downside of the lighter weight and reduced GYRO effect.
First of all, straight line stability is reduced, if not to the point of dizzying.
I get the sense that there's something unsettling about it.
I wonder if it is noticeable when the speed exceeds 100 km/h.
Also, Small Gap is transmitted as vibration.
This is thought to be due to the fact that the lighter weight is not fully absorbed and transmitted.
Maybe once you get used to this area, you won't mind.

Also, I've seen a few reviews here and there that say it's often springy.
I think I can solve the Large one by setting up the suspension.
The place where the Wheel was installed has various know-hows and
I didn't have the feeling that I'd be hosed if they did the Setup for now.
It looks good, performs well, and you won't regret buying it.
I myself bought it 80% on looks, so it's unlikely to be effective.
I think it is very effective Large for people who drive fast and furious on mountain roads. View detail

HAYASHI Cast Wheel CB750K1/F-6 Hole R-Drum

Dachi

27 Mar 2024

Spoke & Nipple Set HF

Fits: HONDA CRM80, HONDA CRM50

Japanese Webike user

4/5

It will be clean.

As is the fate of spoke wheels, no matter how hard you try to take care of them, over the years, rust will become noticeable on the wheel rim and hub, especially on the spoke.

The Spoke can be polished to some extent by Bonnstar or PIKAL, or if the Tire and Tube can be removed and the Bearing is to be replaced, the entire Wheel can be soaked in rust remover. However, in the end, the best way to clean the Spoke is to replace it with a new one.

There are no quality problems and it is very clean.
but the Rim group was very Large strange because it was the first time to work on it.
If you just want to assemble it, you can refer to the pictures you took before disassembling it.
Since there is no run-out machine, it is temporarily assembled on the jack-up car body, and several Tie Wraps are attached to the car body, and the upper and lower Quantities:Pair (for Left and Right) It's a steady process of tightening the screws.
To be honest, I didn't want to do it again, so much so that I thought I would ask a contractor to do it next time.

However, it was worth the effort, and when it is done, it is very beautiful. It is a new product, so of course I am very satisfied with the finished product.

Since the price is also there, it is a Recommendation for those who are familiar with Spoke groups and want to try Challenge, but otherwise, it is better to request Large Human Shops.

The work is Large strange, but the product itself is very satisfactory.

The model used is an xlr80, but since the front is customized and crm80 wheels are used on the xlr80, the hubs and rims are also crm ones. View detail