Reviews
Fits: HONDA Super Cub MD, HONDA Super Cub Pro, HONDA solo, HONDA MD90 (Postal CUB), HONDA MD70 (Postal CUB), HONDA CL50, HONDA MD50 (Postal CUB), HONDA BENLY50CD90, HONDA BENLY50CD50, HONDA LITTLE CUB, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50, HONDA SUPER CUB110
New, good.
Used for a Lantern CUB of a memento. The suspension has been changed from 17in. to 14inch of LITTLE CUB. I wanted to wear 17in. TRTire, and if I had held out for another year or so, I could have had 17in. TRTire!!!! I was very sad and heavy! I bought the wheel used and I don't remember replacing it, so I proceeded to work on it this time because I was free from work. I will report back if there is any change after that! View detail
Cool Axle Shaft!
I replaced it because it was rolling too poorly!
I am not sure about the stiffness increase, but the pushing and turning has become much lighter, so the power must have increased due to the reduction of drive loss (laugh).
How about as Bonsai Parts?
I did the replacement by myself. The maintenance stand was necessary, and I pulled out the NORMALAxle shaft with the SEROW Axle Shaft I happened to have, so the replacement itself was easy, but I had a hard time adjusting the chain afterwards…That Memory Quantity:Pair (for Left and Right) I don't think it fits, should I buy a jig?
View detail
Cool Axle Shaft!
Rigidity up! Rolling resistance reduction!
I'm not very sensitive, so I could only tell that the pushing and turning had become lighter (laugh).
The original Inverted Front Fork should not be stiff enough, so … we may find out if we drive it more.
View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000 MkII, KAWASAKI Z1000 (air-cooled)
Maniacal Parts
I've been wondering about buying it for a long time … it's just a stick.
However, I think you can experience it.
For example, if you intentionally put a load on the Front and drive into the Corner, the Wheel turns smoothly, and the suspension moves well and feels light!
I just wondered if it is a Maniacal Parts, like … only for those who understand.
View detail
Rear axle shaft
I replaced the Front and it was so good that I also replaced the Rear.
The turnaround of the corner became smoother.
View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Large I'm satisfied.
This was my first time replacing a tire, but the wheel was also rusted and had a bad hole in it, so I replaced the wheel and tube altogether. I was prepared for the quality because of the low price, but Large was totally durable. After painting and assembling, I am satisfied with Large. The store responded to my questions right away and shipped my order immediately after I placed it. View detail
Replaced by preventive maintenance
We purchased Wheel used and used it for one year.
Damper replacement was performed as preventive maintenance since it was time to replace Tire and Sprocket.
We will charge a labor fee for the work!
The acceleration was firm during acceleration. I'm not sure if there was any discomfort or Time lag...
View detail
Fits: SUZUKI KATANA, SUZUKI GSX-S750, SUZUKI GSX-S1000A, SUZUKI GSX-R600, SUZUKI GSX-R750
KOODAxle Shaft
To be honest, I wasn't expecting much...
The impression may be a bit Largegish, but Motorcycle has become something else.
As for city riding, it has become more stable and easier to ride outclassing, as if it has become a high spec model with a higher motorcycle grade.
I didn't think that just changing one pc of sticks would make such a difference.
View detail
Fits: HONDA CT125 CT110 HUNTER CUB, HONDA CROSS CUB 110, HONDA CROSS CUB 50, HONDA SUPER CUB C125
The difference is obvious.
I was considering SP Mukawa's Hollow Bolt, but after reading the impressions of this product, my heart was moved.
There was once a time when parts called Front Fork Stabilizer were popular.
Motorcycle front fork with upper and lower Three-Pronged Fork and Axle Shaft with Quantity:Pair (for Left and Right) are connected.
Quantity at the top of the bottom case between the bottom Three-Pronged Fork and the Axle Shaft, which is the longest distance.:Pair (for Left and Right) This is a Parts to increase the strength of the entire Front fork by connecting the
In the case of the CUB, the Three-Pronged Fork is only on the bottom, and the Front Fork is connected to the Three-Pronged Fork and the Axle Shaft in only two places, so it is obvious how much effect an increase in the strength of the Axle Shaft would have.
In addition, the precision of the product (i.e., as close to straight as possible) and the hard plating reduces rotational resistance.
Installation is simply a matter of replacing the OEMParts, so if you have the proper tools, it takes only 10 minutes.
From the moment the installation is complete and the Center Stand is lowered Ale?" I thought
The motorcycle moves forward as if it were on a downhill.
Clearly, the rotational resistance of the front wheels has been reduced.
The feeling of improved acceleration and fuel economy, or the feeling of sticking without Downshift on uphill roads, may be the Brush-bo effect.
While driving, the road surface conditions are now more palpable than before.
It may be that what was previously missed by Axle Shaft deflection is now being transmitted to Direct.
I like this feeling, but some may not like it.
Shaft1 pc is only 1000 yen for OEM parts and 3000 yen for SP Mukawa, while this is over 20,000 yen, and it is not a part that can be seen at a glance, so it is not considered by the dress-up crowd.
The high precision and finish of Parts can be seen just by holding it in one's hand.
I hate putting sticky Stickers on my car, but I was so impressed with how great this Axle Shaft is that I put the included Sticker on the Bottom case.
We recommend it to those who want to ride more comfortably and pursue the original Motorcycle riding style.
View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R SE, KAWASAKI NINJA ZX-4RR
This is a good one.
[How is it used?
Mountain to City Riding
Was the one you received as per Image?
Street Image
Was the installation difficult?
Throw to Motorcycle shop
How was your experience with it?
Nice, Front's is Recommendation.
[Included Parts:were they on?
Sticker available
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Ideal for fall prevention
The product is good, but WeBig's shipping is good and very good.
Companies A and R are slow to purchase from inventory and are not counted on.
View detail
It is a quintessential KOOD product!
Smooth movement of the vehicle and lightness of the Wheel's rotation were immediately apparent after installation.
It is pricey, but I am glad I replaced it.
The Rear side was replaced at the same time as the Front side was replaced.
The appearance of KOOD products clearly shows how well they are made.
View detail
It is a quintessential KOOD product!
Smooth movement of the vehicle and lightness of the Wheel's rotation were immediately apparent after installation.
It is pricey, but I am glad I replaced it.
View detail
Excelent lightweight CNC axle collar set for the GROM from Kitaco!
A very lightweight CNC axle collar set for the Honda MSX/GROM from Kitaco. A good way to reduce the weight of the bike while also improving the looks as well! The quality is excelent as usual from KITACO products! View detail
Fits: HONDA dachshund, HONDA Shirley.
OEM Equivalent Product
The front hub bearings were sticking and the shaft axle was worn, so we replaced them with new bearings. The paint was very good and the bearings were already greased up, so it was just a matter of assembly. View detail
Front axle replacement
I had no idea that replacing the Axle Shaft would make such a difference. View detail
It was very good!
The price is low, but the quality is very high and I had no problems at all with the installation.
I am considering purchasing another bottle in Stock!
View detail
Fits: HONDA CB750 Fore (CB750K), HONDA CB750 Fore (CB750K), HONDA CB750 Fore (CB750K)
HayashiCasting
Hayashi Casting is indeed cool. View detail
Fits: KAWASAKI Ninja H2, KAWASAKI ZRX1100, KAWASAKI ZXR750R, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZZR1200, KAWASAKI ZX-7R, KAWASAKI ZX-9R, KAWASAKI ZRX1200, KAWASAKI ZRX1200
Exquisitely made
Beautifly made this wheel spindle is jewel like its so nicely finished, I'm delighted with it as it finishes off my new front end, it complements the high quality Ohlins forks, Dymag carbon wheels and Brembo brakes that I have chosen for my motorcycle restoration, It has the feeling of an expensive watch its so nicely made, Simple to install and a very high quality and expensive 22mm hex driver is included with the shaft, This Shaft is extremely good value in my opinion, i look forward to testing it when my build is finished, Perfectly packaged and the shipping from Japan was on time, I have also ordered the JB POWER rear axle shaft and the JB POWER swingarm pivot shaft, Webike is my favorite source for parts and accessories even though I am thousands of miles away in Ireland. View detail
Fits: SUZUKI GS1000, SUZUKI GSX-R1100
Used on a 91 M model
'91 Replaced from OEM GSX-R1100.
I am very satisfied with the quality of the product as it is a replacement for dress-up purposes.
However, it is a little disappointing that so many Screw sections appear and give a sense of excess.
View detail