Reviews
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Large I'm satisfied.
This was my first time replacing a tire, but the wheel was also rusted and had a bad hole in it, so I replaced the wheel and tube altogether. I was prepared for the quality because of the low price, but Large was totally durable. After painting and assembling, I am satisfied with Large. The store responded to my questions right away and shipped my order immediately after I placed it. View detail
Fits: HONDA dachshund, HONDA Shirley.
OEM Equivalent Product
The front hub bearings were sticking and the shaft axle was worn, so we replaced them with new bearings. The paint was very good and the bearings were already greased up, so it was just a matter of assembly. View detail
Fits: HONDA dachshund, HONDA Shirley 50., HONDA Dax 70, HONDA Shirley 70
CHALY That!
CHALY I bought it to make a thicker footprint of the I am satisfied with the cheap price. View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Cospar good
Cost-effective!
There is less blurring than expected!
The construction is so-so.
The low price makes it forgivable.
View detail
Fits: HONDA dachshund, HONDA Shirley 50., HONDA Dax 70, HONDA Shirley 70
Great Wheels
These are a great upgrade to the stock chaly or dax wheels and being wide than stock give a more aggreive look to the bike they are being fitted to. View detail
Fits: HONDA Mighty Ducks (ST90), HONDA Shirley 70, HONDA Dax 70, HONDA Shirley 50., HONDA dachshund, HONDA Mighty Ducks (ST90), HONDA Shirley 70, HONDA Dax 70, HONDA Shirley 50., HONDA dachshund
Color diameter does not match ST70 ….
I am Restore DAX (ST70) and bought a beautiful Axle Shaft.
The texture is a little disappointing, but I don't think it is a problem at all for practical use.
However, one thing that was not so good was that the diameter of the collar was too small. The Brake Side was fine, but the Sprocket Side could not be used because the collar diameter was too small for the seal into which the collar was to be inserted.
Perhaps a different year DAX Seal is needed?
View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
8" wheel with poor finishing
After buying Kitaco, G-Craft and Takegawa rims, this Tanaka Trading rim was not good. The picture shows it highly polished but it is not at all. In fact it is nothing but rough scratches all over it, not buffed at all. I will need to sand it with 600 grit, then 800 grit, then a buffer with compounds. You get what you pay for so if you buy a cheap rim dont be shocked when its not very good. I will buy Kitaco and G-Craft rims from now on. View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
Cool!
Casting wheel of my dreams!
Cosmo!
I used it for GORILLA, but I also bought it for DAX, which I'm in the process of creating. w
View detail
Fits: HONDA dachshund, HONDA Shirley 50., HONDA Dax 70, HONDA Shirley 70
Quality is good.
It looks great, and being aluminum, it is light and accurate.
There is some BALI on the edge of the foil, so it would be good to remove it with paper.
View detail
Fits: HONDA dachshund, HONDA Shirley 50., HONDA Dax 70, HONDA Shirley 70
It is a good item
It looks beautiful and I am glad I installed it because it saves weight. View detail
Fits: HONDA XR100 Motard, HONDA dachshund, HONDA Dax 70, HONDA Ape 50, HONDA dachshund, HONDA Ape 100, HONDA Dax 70, HONDA Ape Type D, HONDA Mighty Ducks (ST90), HONDA Ape 100 Type D, HONDA Ape 50, HONDA dachshund, HONDA Ape 100, HONDA Dax 70, HONDA Ape Type D, HONDA Mighty Ducks (ST90), HONDA Ape 100 Type D
NTN Bearing
About quality and texture NTN always has the quality to trust and buy About the feeling of use It's not used yet. I had to buy two, but I only bought one Products to buy together rubber hammer Difficulty of installation difficult, hard Cost performance and comparison with other products It is the cheapest and has a reliable quality About shipping and packaging It took a week and the packaging is great Any concerns, cautions, or advice when purchasing I did two in quantity, but I couldn't check the quantity because I was purchasing other products first I should buy it again when I buy other products Since it is an old bike that is 10 years old, there are many things to be done, so it is the most important part of it, and the quality of it is also reliable View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
Lowest quality
(Note:WeBig has been good to us. It's about the item itself.
Distance Collar is lowered by its own weight and Axle does not enter from the side.
Through Mr. WeBig. Funny, isn't it?" I said.
"It's the part that keeps Bearing from getting inside, so it's not a
It is slightly movable before installation 。 "
He was kind enough to tell us about the body structure.
(The OEM has a flange that is press-fitted into the pipe so that it fits almost in the center while still wiggling around. However, this one does not have a flange and is just a Pipe. Of course, there are some models that have only a pipe, but in those cases, the inner diameter of the hub is narrower so that there is not much gap from the center even though it is a pipe shape.
When you install it on the car body, of course it is in this direction (the bottom side of the image is the ground), so I guess it means that you should insert it after putting out the Center by inserting a Driver from the opposite side….
The most surprising thing is this. It's Spec. This is Tanaka Shokai, which says
You have to do a lot of them to know if it's too Gap (too Large). (I'm sure you can't tell that this is too Gap (too Large to play with) unless you play with a few units.
I wonder if they would be able to push through with that (Spec. ), I guess I'll be able to push through with that (Spec.
View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
For lighter suspension!
I was prepared for this because the Gold amount is extremely low compared to JAPAN.
The Rim is not shiny and there is BALI around the Wheel, just as I expected.
BALI was lightly polished with Paper and Tire was assembled.
In the driving test, the handlebar was comfortable with no shaking and no body vibration.
I will try to polish Wheel when I have time.
View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Chinese Wheel
3.5j
The Center of the Large body comes out both front and rear by pontooning, but there is some flex when you rotate it.
That's the Chinese, BALI is terrible.
View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
1/2 ratio
I used it on my '88 GORILLA.
The Swing Arm is SHIFTUP 16Long and the suspension is for 350SS.
I'm very happy with it.
When I saw the center distortion of the wheel before installing the tire, it was not so bad for the rear wheel, but the center was a little off for the front wheel.
Next, when I installed the tire and put in the air, I felt anxious about whether the BEET of Tubeless would work properly, but when I put in the air from Compressor, the BEET went up properly, so I was saved.
I think that the feeling that I ran is not too different because the running fee Ring is amateur, but the appearance when I parked it became very good and pleasant.
I'm sure you'll be able to find a lot of people who are interested in this type of product. Is it still impossible?
View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
Used for GORILLA
I used it on my '88 GORILLA.
I changed to Aluminum Cast Wheel, so I installed it to Center out.
Because the material is not aluminum, I think that it is a little heavy, but I use it in Touring, etc. If I use it in Race etc., I think that acceleration, absorber adjustment, etc. become Large strange, but I of probably Touring use am out of the question.
My impression of the installation was that I took it out of the clean bag and weighed it with Caliper and there were no errors and it installed quickly.
I was able to use the wheel bolts without interlocking them.
View detail
The wheels and tires arrived early, and in good condition. The tires were better than I expected. I haven't driven with the new wheels because the bike is still being built. I look forward to riding this bike when completed. I would recommend these wheels and tires to anyone building a Gorilla or similar small bike. View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
Used for assembly from Frame
I used it for my first MONKEY assembly, I don't know the OEM and I'm happy with the texture. View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
I can use it normally.
I was worried because the price was too cheap, but I can use it normally.
Well, I don't want it to be useless.
So far, there are no problems.
View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
I put it on a 6VGORILLA.
I put it on my Z50J-13 with no problem.
Tire, Minimoto Tube and Quantity:Set, 350-8
Iron Wheel, because Rust will stick with Tire.
I'm hoping that's not the case with the Aluminum Wheel.
View detail