Reviews
Better than nsr50 early period.
The nsr50 early model Fork does not have damping and pre-road adjustment, but by changing to this, the ride quality can be set.
Good product for Circuit and for public roads.
View detail
Front suspension movement
They are more expensive, but the fork movement is better than OEM Parts. View detail
Fits: HONDA GORILLA, HONDA MONKEY
It'll look better.
For the makeover of 5LMONKEY, I installed Boots along with Front fork spring replacement.
It was easy to install because it was a part of the Spring replacement, but if you want to Rose the Front fork for this part only, it is Large strange, so if you want to Rose it anyway, I recommend you to strengthen the Spring and Overhaul at the same time.
I used OEM Product for Boots, but since I made it 15mmLowdown, Bellows becomes a little painful, but it is acceptable.
The Boots color is G-Craft, the precision and quality is perfect and it fits the 5LOEMFork perfectly.
The Screw juts out less than 1mm when tightened, so I sought a position that would make it less noticeable, about 45 degrees from facing inward to the second half of the vehicle.
However, I had a hard time with this Screw.
I fix it with screw of M3×3mm, but when it becomes overtorque, I blame the thread, and when I tighten it a little weakly, it comes off while running, and I don't want to use screw lock because the diameter is small, and the tightening condition is difficult.
I am Quantity:Pair (for Left and Right) I had to buy it again at Home center. The screw is protruding, so it becomes a wrinkle by all means, but I made this measure because it is a place that cannot be seen without looking into.
If the Screw comes off, the parts won't fall off, but the collar can damage the paint on the Fork, so it's best to do something about it from the start.
View detail
Excellent!
Hello you all! Just recieved my g-craft nsr mini forks. They mount up nicely with my Agras triple tree's. The quality seems good and i like that you can adjust the dampening on them. The dampening isn't to soft or to stiff when i got them. But that depends on what you use them on. I use them on a Z50 with 12 inch wheels and they work great. Much better then my chinese forks that i had before. View detail
Installation Bolt is ....
Installation Bolt was Steel, even a little disappointing.
I think Bolt is also better if you make it Stainless Steel.
Other than that, Bolt-on makes texture feeling good as well.
View detail
Recommended for Normal fork
This time I exchanged with Moldy's Reinforced Spring.
Hydraulic Inner Fork was also attractive, but I felt disgusted at high prices and Chinese Parts, so I made this combination.
And the result is satisfactory.
There was no funny feeling that fits the OEM at Breaking, and it became a feeling that Cornering firmly stepped on.
Certainly, if it is a bit cheaper it is even better, but even with Spring I think that it will be satisfactory enough if it is over 8000 yen.
For people who adhere to Normal look, I feel it is a good product.
View detail
I got tightly around the legs.
I used it because the z 50a's normal shock was played..
Tightly firm than OEM.
The price is expensive, but it is worth that much.
View detail
Do you need attention to install?
I think that there is no problem with OEM Inner, but you may need to pay attention to re-Plating and Inner of Other Company Product. Conversely, it means that the dimensional accuracy is good. View detail
Hi all, This product is of the highest quality and finish, fits and works great. I would highly recommend this product to anyone.
Hi all, This product is of the highest quality and finish, fits and works great. I would highly recommend this product to anyone. View detail
Exactly to fix Reserve tank
I was worrying about installing OHLINS's Reserve tank, and found this product and purchased it immediately.
Because it is made firmly, Cushion's Rubber is also attached, so the Reserve tank is not scratched.
In FJ, since there was no Screw hole in Resolution Tank Bracket attached to Frame, I created and installed Bracket by myself.
View detail
Before these bushes my forks were very loose and scary to ride. Now they are stiff and inspire confidence when riding. A great improvement over stock.
Before these bushes my forks were very loose and scary to ride. Now they are stiff and inspire confidence when riding. A great improvement over stock. View detail
I have stuck the OHLINS to APE100. Although the Tank stay of the Type which the Frame of G Craft is put before and attached was used, a Hose interferes in the Stubby of a Swing arm and a Hose bends a place is not changed -- take -- it was lost, a
I have stuck the OHLINS to APE100.
Although the Tank stay of the Type which the Frame of G Craft is put before
and attached was used,
a Hose interferes in the Stubby of a Swing arm and a Hose bends a place is not changed -- take -- it was lost, and this Stay was found when it worried about whether what we will do with the Type which puts a Frame, without the ability making it move to others, or to do.
Since this Stay has simple how to attach, the place attached very well can be chosen.
Making
is a perfect good thing.
View detail
It is a dust seal for normal forks. It is cheaper than an original manufacturer's product, and presses down the invasion of garbage to the inside of Faulk firmly.
It is a dust seal for normal forks.
It is cheaper than an original manufacturer's product, and presses down the invasion of garbage to the inside of Faulk firmly.
View detail
Faulk's rattle is lost and breaking is made to a smooth. Sense of stability is also raised. In the direction adhering to a normal fork, it is recommended.
Faulk's rattle is lost and breaking is made to a smooth.
Sense of stability is also raised.
In the direction adhering to a normal fork, it is recommended.
View detail