Reviews
Large things are not explained! It is much shorter than OEM!
Caution before performance crap! This suspension. It's short. (Angry)
It is listed as TW200/225 compatible, and since there is no explanation, I thought it would be the same size, but it is much shorter than the OEM suspension.
If it wasn't the same size, I would have hoped there would have been an explanation. If I had known it was short, I would never have purchased it!
Seeing things, Once I don't have a ShacoTan in my off car. I paid high gold to buy Garbage. I was disappointed.
I doubt the designer's Sense, even if it's the old fashioned Ska tune type Custom. no Sense!
However, I paid a good amount of gold for it, and since it has been sitting for about six months after purchase, I would not be able to return it......so I am in an atrocious mood,
Since it has a coilover function, I extended it to the limit and installed it. Still, it is a little shorter than OEM. Too bad.
Comparing the appearance before installation, the damper section looks thinner and poorer than the OEM.
Pre-road is installed as shipped. Attenuation is at its lowest.
The front side is equipped with a Cartridge emulator and pre-road is also applied.
When installed, the suspension itself is shorter, but the spring rate is higher from the beginning and the sag is reduced, so the Rear ride height is higher at 1G's ride. (The optical axis is lowered.)
This is not the kind of thing I wanted, but I feel ・・・・ indescribable・・・・
Normally I wouldn't want to give it even 1 star, but after riding it... not bad ・・・・
Things are not bad.
It's very well controlled and of high quality. It is clearly different.
Completely stiffer for on road use. The front end tends to cut into the road as the vehicle's ass rises higher than the OEM during cruising.
It picks up fine Gap and has a lumpy feel. However, when stepping on the Gap or swell while turning, it becomes a crisp and snappy leg without wobbling. It is honestly easy to ride.
I think this will increase the risk of cocking up when going off-road, and I don't think it will be a comfortable ride...
It is intended for long-distance travel with luggage, so maybe a harder taste that is not as heavy is not a bad thing...
Supple in the beginning, stiff in the back. Stroke is up if you want....
I didn't get what I wanted due to the lack of explanation, but things are good from a different perspective and well, this is what I got.... It was the Rear Suspension that made me feel indescribable.
I don't like even 1 star if it's just for the emotion. But considering the performance of the product, it's not bad at all, in fact, it's rather admirable. I rated it as 3 Stars because of this.
It is very good for on road driving....
Whatever the case may be, I would have liked to have seen a better description of the product.
This would be good for those who are customizing for on road or want to lower the ride height.
The stiffer design may be suitable for heavier people or those who carry a lot of luggage.
Sorry for the poem.
View detail
Fits: HONDA Today, HONDA Today, HONDA DIO(4Cycle), HONDA DIO(4Cycle)
Repair is completed at a low cost!
Installed on ThirdMotorcycle's Today that goes to the nearby Convenience, replacing an OEM OEMRear Suspension that had been scuffed up and deteriorated. The price is very low, but I have had no problems with it! I am Large satisfied with the low price and the refresh! View detail
Fits: HONDA monkey, HONDA Benly CD90, HONDA Super Cub 90, HONDA Super Cub 50, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA Benly CD90, HONDA Super Cub 90, HONDA Super Cub 50, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
I bought it just for the color.
I won't know for sure until I ride it for a while, but I bought it just for the color, so I am not particular about its performance. View detail
It looks good!
NC42Rear suspension was leaking Oil and I couldn't afford OEM because it was too expensive.
The item received is clean with some SmallWound! 。
Installation was not possible because the Bolt under the Right Side interfered with the Exhaust System to remove the OEM! Others were completed Smoothly. The upper part of the Shock was not easy to install, so I applied a little Chain oil as a reference to others and it went in. Also, one of the lower side had to be tapped a little to fit the holes in the mounting position. Also, it was impossible to mount the pon, so I had to extend the overall length by about 8mm to complete the installation.
The ride is not bad, but it feels soft, so I will adjust it. I don't know about durability, but there seems to be no oil leakage and no initial defects.
View detail
Easy to install
I had an Indicator, but I replaced it with this one. It's not very noticeable, but the price is low, so I guess it's okay! View detail
Fits: YAMAHA YZF-R1, SUZUKI GSX-R1000, KAWASAKI ZX-10R, HONDA CBR900RR, HONDA CBR1000RR
Four months for delivery.... The product is good!
Not conformity But I was able to use it for MVAGUSTAF3.
The front and rear suspension on the MVAGUSTAF3 is too hard. It is also played by the Gap in the city, and also gets pushed up on the highway.
I lowered the Initial and oil level on the Front, but it is still too hard to use the Stroke effectively.
I looked for a soft spring, but could not find one for F3, so I looked on the web and purchased this YSS with a similar spring diameter from Webike. However, the delivery time was long - it took 4 months from order to arrival.
YSSFront fork spring
[Outer Diameter ] 38.0mm
[Free Length 230mm
Spring rate 8.5N/mm
[Corresponding Model Type] CBR900RRFire blade、CBR1000RR、ZX-10R、GSX-R1000、YZF-R1
Compared to the OEM front spring, the free length is 10mm shorter, but the Initial Adjuster can be adjusted from 0 to 13mm to produce a proper 1G sag.
When I actually rode the car, it changed to a front suspension that normally works properly.
The Rear also can be changed to Spring by Hyper pro to create a standard Japanese suspension that can be enjoyed by Japanese people.
For F3, we recommend replacing the front and rear Springs.
View detail
Fits: SUZUKI ADDRESSV125S, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125
It looks very beautiful. But it bounces.
The rear shock of the ADDRESSV125S was damaged due to age-related deterioration, so we replaced it with a reliable KITACO shock.
The replacement itself is easy, just a 14mm Glasses Wrench, Phillips Screwdriver and a 10mm or 12mm Socket.
The overall length is the same as the OEM model (315mm), so it can be replaced without any change in ride height. The replacement was completed easily in about 30 minutes.
Pre-road is not touched and hung, and when I finally got on it, it bounced on bumps anyway. (Always one person on board)
I think the Spring rate is high due to the small number of Spring rolls, and I don't feel much improvement in traction, which I was hoping for the most.
I'm going to try to adjust it with pre-road adjustment etc., but I don't have high expectations for it. It is just too sticky and not at all flexible.
The effective Stroke seems to be short and I am wondering about the damping force against the Spring rate. I can't even feel the damping force.
It is too hard to shrink and too resilient. It is like the four wheels of ShacoTan.
The damaged OEM suspension was also Large approximate, but I didn't expect it to bounce more than that. Perhaps the OEM was more supple with the way the Spring was wrapped.
I thought it was a shame because it looks beautiful and the details look well made.
View detail
Fits: YAMAHA XS250, YAMAHA XS400, YAMAHA XS250, YAMAHA XS400
Sturdy Fork Boots!
The rubber has a good texture, is durable and reasonably resilient, so it was easy to install! However, it would be nice if it were a little cheaper! LOL! View detail
Fits: YAMAHA SR400 19, YAMAHA SR400 19, KAWASAKI Z125 Pro, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500
Self-satisfaction Level?
I bought this product because the OEM cap was plastic and the texture was not good (dirt and fogging). View detail
To balance with Rear...
When replacing the rear suspension, I used a RateUp spring to get the balance.
I used #15 Fork oil for the installation.
Spring with the same Variable rate as the OEM, but with a RateUp of about 10%.
I couldn't tell the difference myself. (^^;)
View detail
SMCR
To be honest, it may be effective, but I did not feel it as much as I would have liked.
When attached to the current SMCR, it slightly hits the Blinker.
In my case, I put a Washer over the bottom of the Meter installation.
View detail
expensive
It is convenient that the ride height can be adjusted steplessly
I would recommend it if you are dissatisfied with Lowdown Link from other companies.
But the price is Neck high.
View detail
I didn't notice much change.
This is a 2008 ZOOMER.
Although the mileage is low for its age, it no longer feels as massive as it did when it was new, so I changed the Shock first.
I didn't feel any change after the replacement, probably because I only drive around town.
It looks perfect!
View detail
yss
It's yss and can be used accordingly, but it depends on the Grade. View detail
one...
Heavy than expected to increase the rigidity of quality and texture information There is a feeling that the reaction is clear when using it Installation must be completed after installation on one side There could be an unexpected situation The price is higher than the list price of the web bike. Webbikes ignore the price even if the product shows the price Webike packaging is always good. Delivery and packaging will arrive in a week -_- I'm a little angry. I don't understand why you bought it ¥2,000 more expensive than the price you bought when it was sold out. I think the price went down after the accident. I think I ordered it and put it in stock View detail
Red is the key point
Quality and texture It feels like a general cnc product Installation that adds a monkey rear color to the feeling of use Installing one bolt at a time is easy Better cost performance and price than other products WeBike packaging is always great. Arrives in a week for delivery and packaging Concerns, precautions, or advice when purchasing as the color may vary due to cnc processing View detail
The thing itself is very good
It was installed on a GN125H.
But Spring rate is too high and Shock sinks only a little when riding. (ReboundStroke shortage) 。
In addition, it made the ride feel lumpy, so I removed it immediately.
The product itself is very well made.
Dimension Information
Spring rate 1kgf (Call manufacturer to confirm).
Total length of Spring when removed from Shock:190mm
Total length of Spring when Shock is installed:180mm
When riding 1G (Our weight 54kg) Spring total length 168mm
Stroke 70mm to BumpTouch
View detail
Footing is not much different from NORMAL.
[How is it used?
From city driving to touring
Was the one you received as per Image?
As you can see in the image, it looks the same as NORMAL, but the Dust cover of the Piston rod (?) is not there, so you can see the entire Plating ROD. The Dust cover of the Piston rod (?) is missing, so the ROD of the Plating is fully visible.
Was the installation difficult?
It is not difficult to remove the Exhaust System, but the work itself is not difficult.
How was your experience with it?
I have short legs, so I expected the height of the car to drop, but it doesn't drop that much.
However, it may be good because Side Stand can be used as it is
Pre-road is similar to JA65 as it has 5-stage switching, but it looks a little cheap as it does not have Dust Boots!
Dumping characteristics are not clear to the layman, but the ride is comfortable!
When I rode with the FFork thrust set to NORMAL with the pre-road at its weakest, I felt the car was a little forward, but it was probably just my imagination.
[Included Parts:were they on?
Pre-road switching tool is included.
[Was there anything that disappointed you?
Nothing in particular
Point and hang of installation
Exhaust System side:Remove the Engine Under Cover, remove the SIDE bar One Side lower bolt, and turn it downwards to make it easier to remove the Exhaust System.
[With or without Instruction Manual
There is no such thing as an installation instruction manual.
View detail
Fits: HONDA monkey, HONDA Benly CD90, HONDA Super Cub 90, HONDA Super Cub 50, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA Benly CD90, HONDA Super Cub 90, HONDA Super Cub 50, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Installed on MONKEY
The oil was leaking from a certain company's rear suspension that I had been using until then, and since I was scheduled to go touring in a few days, I decided to purchase this product because of its price and delivery time.
Can be installed on either MONKEY or CUB with or without the included collar. Damping force can be adjusted with the included special tool.
I think the cosmetics are good and the performance is fine.
I just wish there were several different colors.
View detail
Fits: HONDA glom, HONDA MONKEY125, HONDA MONKEY125, HONDA DAX125, HONDA glom, HONDA glom, HONDA HRC Grom(GROM4), HONDA HRC Grom (GROM5)
That's still hard.
The hardest Spring was hard to push up from the road surface, so I changed to the softest one, but even with the Oil set to Light, the push up from the road surface was quite strong. When I push and pull at a stop, it is very mild and good feeling, but when I go over a slightly large gap, it is very, very hard. View detail