Reviews
Although it exchanges and is still two days, for the moment, there is also no leak and it is favorable. Since it is not so sensitive as a difference is known about operation, he has no problem for the time being. Since the price is cheap compared
Although it exchanges and is still two days, for the moment, there is also no leak and it is favorable.
Since it is not so sensitive as a difference is known about operation, he has no problem for the time being.
Since the price is cheap compared with an original manufacturer's product, it can exchange freely and is satisfactory.
If it can do and there is also a lineup of a dust seal, in addition, I am glad.
View detail
Fits: KAWASAKI KSR110, KAWASAKI KSR110, KAWASAKI KSR110, KAWASAKI KSR110
Since Mayne's motorcycle is a nitron, if compared, it is a hard, but he compares from normal, and a tire thinks firmly that it has adhered to the ground surface. It has shone with KIRATSU under the hips. I think that they are goods excellent in co
Since Mayne's motorcycle is a nitron, if compared, it is a hard, but he compares from normal, and a tire thinks firmly that it has adhered to the ground surface.
It has shone with KIRATSU under the hips.
I think that they are goods excellent in cost performance.
View detail
Fits: SUZUKI GSX1300R Hayabusa, SUZUKI GSX1300R Hayabusa, SUZUKI GSX1300R Hayabusa, SUZUKI GSX1300R Hayabusa, SUZUKI GSX1300 HAYABUSA
Although attached for the purpose of the sex up with a guide peg, a little riding position also occurred actually, it became feeling, and the degree of anteversion was also eased. Of course, I become good also with the guide peg at the time of a stop,
Although attached for the purpose of the sex up with a guide peg, a little riding position also occurred actually, it became feeling, and the degree of anteversion was also eased.
Of course, I become good also with the guide peg at the time of a stop, and fully think that it is effective.
View detail
Although it is the change from pure Sas, when it is CB400SF, since the original manufacturer's product is also solid, it is almost equivalent in it being pure in respect of a degree of comfort, but in a road over a mountain pass with many cutback of a han
Although it is the change from pure Sas, when it is CB400SF, since the original manufacturer's product is also solid, it is almost equivalent in it being pure in respect of a degree of comfort, but in a road over a mountain pass with many cutback of a handle, probably because it becomes easy to hold Sas's motion, I feel that centroid movement became easy. View detail
Sas who considered it as pure HENAHENA was Sas who is different and manages work firmly as a quickly. It is the image that how whose Sas is depressed to a level difference is deep. Although it was slightly a difficulty that a price stretches, it a
Sas who considered it as pure HENAHENA was Sas who is different and manages work firmly as a quickly.
It is the image that how whose Sas is depressed to a level difference is deep.
Although it was slightly a difficulty that a price stretches, it also overhauls in the future and the defect in an initial stage corresponds exactly.
It was perfect when the color of the spring was yellow now. Sweat
View detail
Fits: YAMAHA JOG [jog]., YAMAHA JOG [jog]., YAMAHA JOG [jog]., YAMAHA JOG Z2 [JOG]., YAMAHA JOG-Z [JOG]., YAMAHA JOG-Z EX [JOG]., YAMAHA JOG Aprio T2 [JOG]., YAMAHA JOG Sports [JOG]., YAMAHA JOG Sports Z [JOG]., YAMAHA VINO [Vino].
It attaches and is softer than hard as a feeling. Since it is AT, it is regrettable that Sas's color is not in sight, but since an understanding of the engine performance and a price is reached, it is recommended. However, I think that it will rid
It attaches and is softer than hard as a feeling.
Since it is AT, it is regrettable that Sas's color is not in sight, but since an understanding of the engine performance and a price is reached, it is recommended.
However, I think that it will ride by a town riding premise to the last since there is uneasiness a little at a corner.
View detail
The logo of a face nut is a joke nut. There is practicality, such as fastening with the rope which fixes a load. 22 deep sockets are needed for attaching with a socket wrench.
The logo of a face nut is a joke nut.
There is practicality, such as fastening with the rope which fixes a load.
22 deep sockets are needed for attaching with a socket wrench.
View detail
![SPORTS LINE Rear Twin Shock [E Series] E302](https://img.webike-cdn.net/catalogue/images/50511/e302_01_TS.jpg)
Pure Sas purchases by oil leakage for urgent exchange. Although the price was cheap, goods arrived and it saw, and although it is an amateur, texture is and is satisfied considering a price.
Pure Sas purchases by oil leakage for urgent exchange.
Although the price was cheap, goods arrived and it saw, and although it is an amateur, texture is and is satisfied considering a price.
View detail
Fits: SUZUKI GSX400, SUZUKI BANDIT400, SUZUKI GSF750, SUZUKI GSX400, YAMAHA XJR400, SUZUKI BANDIT400, HONDA NSR250R, YAMAHA XJR400R, YAMAHA XJR400, YAMAHA XJR400R
It attached to the impulse 400. Although it is comment, attachment is also simply attached with a hezagonal wrench and is thought that the sense of stability of the front increased somehow at the time of corner penetration in a high speed area. Ap
It attached to the impulse 400.
Although it is comment, attachment is also simply attached with a hezagonal wrench and is thought that the sense of stability of the front increased somehow at the time of corner penetration in a high speed area.
Appearance is also mechanical, and combination with the carbon fender of the company is also racy, and since it is GOOD, it is preeminent for the dress-up effect up.
View detail
Fits: HONDA NSF100, HONDA XR100 Motard, HONDA XR50 Motard, HONDA Ape Type D, HONDA Ape 100 Type D, HONDA NSF100, HONDA XR100 Motard, HONDA XR50 Motard, HONDA Ape Type D, HONDA Ape 100 Type D
Although it does not change at all only by attaching, it is also possible for a span of adjustable range to spread and to carry out the posture of XR100 motard lower in the back for a front falling by combining with the top bridge whose adjustment of a pr
Although it does not change at all only by attaching, it is also possible for a span of adjustable range to spread and to carry out the posture of XR100 motard lower in the back for a front falling by combining with the top bridge whose adjustment of a pre-road and adjustment of pushing out are attained. View detail
Fits: KAWASAKI KSR110, KAWASAKI KSR110, KAWASAKI KSR110, KAWASAKI KSR110
mouthful review: -- it is not calm in whether does the pure rear suspension of quite cost performance KSR110 come out soft and also the damper is effective. honestly, I am fearful if it bends at a high speed -- ? -- I was quite fearful (~_~) Although
mouthful review: -- it is not calm in whether does the pure rear suspension of quite cost performance KSR110 come out soft and also the damper is effective.
honestly, I am fearful if it bends at a high speed -- ? -- I was quite fearful (~_~) Although it came out and this product was attached, it compared pure and the damper is considerably effective.
When it straddles, it becomes likely to be sticky and MOTCHIRI [ likely ] be.
I think that it is the highest cost performance since it is below the 笙ｪ authentic positive half the sum which the passage speed in the usual corner went up by favor by which the motion of rear suspension settled down by 25 km/h.
They are completely dissatisfied goods which are not except appearance getting immediately bad with rust.
View detail
Fits: SUZUKI BANDIT250, SUZUKI BANDIT250, HONDA CB-1
Although purchased with the intention of the dress-up up, it was effective beyond anticipation. The touch of a corner when the speed has come out to some extent etc. made into FUNYATSU was lost. However, a fork guard cannot be attached if Colet is
Although purchased with the intention of the dress-up up, it was effective beyond anticipation.
The touch of a corner when the speed has come out to some extent etc. made into FUNYATSU was lost.
However, a fork guard cannot be attached if Colet is followed.
View detail
Fits: HONDA GB250 CLUBMAN
It is used in j type clubman. If it was quite expensive goods, it took [ whether it is worth doing and attaching to its own vehicles full of wounds, and ] time fairly by purchase. When actually attached, only these parts did not necessarily float
It is used in j type clubman.
If it was quite expensive goods, it took [ whether it is worth doing and attaching to its own vehicles full of wounds, and ] time fairly by purchase.
When actually attached, only these parts did not necessarily float comparatively [ with showy coloring ], but it changes to a quite racing impression.
The touring point also attracts attention.
Although I thought that a feeling of a well came out and the effect was good certainly, since it stuck simultaneously with a tire (TT900GP), as change of a degree of comfort, I do not understand clearly.
If there is an opportunity although it is extravagant with 250 one cylinders, they will be the goods I would like you to challenge.
View detail
Fits: KAWASAKI GPZ900R, KAWASAKI GPz1100, KAWASAKI ZRX400II, KAWASAKI ZRX400, KAWASAKI ZEPHYRX, YAMAHA TRX850, KAWASAKI ZEPHYR750
It attached to GPZ900 R-A11. It was the old vehicle, and since the rim width of F wheel was swapped to the thing of 3.5, F Faulk's hardness was worrisome. When it comes to the forge fire of an effect, it does not understand well in physical feelin
It attached to GPZ900 R-A11.
It was the old vehicle, and since the rim width of F wheel was swapped to the thing of 3.5, F Faulk's hardness was worrisome.
When it comes to the forge fire of an effect, it does not understand well in physical feeling.
But those with an effect are believed.
I think that the cost performance from a viewpoint of a dress-up up is high.
Attachment is easy although the attachment description is not attached.
However, I think that it is necessary to carry out this bundle of each part uniformly after carrying out a temporary bundle so that distortion may not appear in F Faulk by having attached (the bolt was bound tight).
View detail
Fits: HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR
The front fork of the hornet 250 is also the same 41 phi, and since a screw thread also meets, it can equip.
The front fork of the hornet 250 is also the same 41 phi, and since a screw thread also meets, it can equip. View detail
Fits: HONDA APE 100, HONDA XR100MOTARD, HONDA XR50 MOTARD, HONDA APE 50
Since the path-through-a-wood run was also considered by XR100 motard, it equipped. A price is also cheap, and appearance also comes seemingly to be an off vehicle and it is good also in appearance after wearing. It is good kana rather than there
Since the path-through-a-wood run was also considered by XR100 motard, it equipped.
A price is also cheap, and appearance also comes seemingly to be an off vehicle and it is good also in appearance after wearing.
It is good kana rather than there is nothing, although the forge fire of an effect is not known? Though natural, wearing requires removal of a front fork.
Well, it is not great work.
View detail
Fits: HONDA NS50 F, HONDA NS50 R, HONDA NS50 F, HONDA NS50 R
Since NS50F has the thin path of a cfc and Faulk, if it equips with a high grip tire, it will be distorted at the time of a cornering, and will lack sense of stability. Then, distortion of a cfc and Faulk can be suppressed by equipping with this stabi
Since NS50F has the thin path of a cfc and Faulk, if it equips with a high grip tire, it will be distorted at the time of a cornering, and will lack sense of stability.
Then, distortion of a cfc and Faulk can be suppressed by equipping with this stabilizer.
If actually attached, an effect will seldom be acquired in an inside low speed area, but by the cornering of a high speed area, it becomes an entire different-thing machine.
They are necessaries for attacking a circuit by NS50.
Moreover, in equipping with these parts, processing of a front fender or removal is needed.
View detail
Fits: YAMAHA FZ750, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR400
Since deflection was felt for steering before equipping with this product, it opted for purchase. Appearance was also decided, steering was also collected, and although it was very good, since attachment was somewhat difficult, * was set to four.
Since deflection was felt for steering before equipping with this product, it opted for purchase.
Appearance was also decided, steering was also collected, and although it was very good, since attachment was somewhat difficult, * was set to four.
View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
Honda It is use in the monkey. Or [ that those who understand understand that it is pure since it shines with a color and condition is different although it becomes a nonchalant dress-up up ]. I think that it can use all the time in comfort since
Honda It is use in the monkey.
Or [ that those who understand understand that it is pure since it shines with a color and condition is different although it becomes a nonchalant dress-up up ].
I think that it can use all the time in comfort since it does not rust.
View detail
Since it is entering two piece, it is a price of pure half the sum. It purchased to RZ250. An authentic positive one had adhered to to the outer tube, and even if it used the tire lever, it did not separate from it easily. When this product is
Since it is entering two piece, it is a price of pure half the sum.
It purchased to RZ250.
An authentic positive one had adhered to to the outer tube, and even if it used the tire lever, it did not separate from it easily.
When this product is supple, the removed seal was assigned and it was devoted with the hammer, it entered easily.
Sas's motion is also very smooth.
I think that they are goods with reliance high also in construction material.
View detail