Reviews
Fits: YAMAHA XJR1300 01-06, YAMAHA XJR1300 01-06
Hi, I need to know if this fork is the FG 340 ohlins model (traditional) or the usd model. I'd like to know the content of the kit too. Thank you Diego
Hi, I need to know if this fork is the FG 340 ohlins model (traditional) or the usd model. I'd like to know the content of the kit too. Thank you Diego View detail
Fits: YAMAHA XJR1300, YAMAHA XJR1200, KAWASAKI ZEPHYR1100
It is the impression that it is and structure is solid as high. it attaches and the difference of the engine performance from normal is honest in the run place -- I do not understand at all. When those who understand a difference attach and ride,
It is the impression that it is and structure is solid as high.
it attaches and the difference of the engine performance from normal is honest in the run place -- I do not understand at all.
When those who understand a difference attach and ride, is the difference from normal understood? It is a question.
Since it was satisfied with the run from the first and purchased mostly only for the dress-up up, it is not dissatisfied.
View detail
Since pure Sas of 95ZEAL had fallen out, it exchanged. One of the reasons for selection of mine which I regard as appearance being good for the direction which the admiration which the touch which floated did not carry out but was attached hates was t
Since pure Sas of 95ZEAL had fallen out, it exchanged.
One of the reasons for selection of mine which I regard as appearance being good for the direction which the admiration which the touch which floated did not carry out but was attached hates was this.
In ZEAL which attenuation can adjust in five steps, the maximum weakness is also enough (at the time of weight entrainment of 78 K).
In bolt-on, attachment will also be impossible, once it does not remove Sas, when [ that therefore carries out attenuation control ] processing needlessness, however right-hand side not being attached, unless it uses rear surface reverse, in order that the level difference of an attaching part may interfere in a frame.
The necessity of merely adjusting according to scene for attenuation sufficient also by the maximum weakness as the point was not felt at all.
I think that it will be remarkable high CP if it thinks by pure replace since a price is also 23000 place in cheap.
If high-quality [ of appearance ] and OH are also considered, KGS325 of a high order is better (TGS325 cannot OH).
View detail
Fits: YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X
Since it bounded even if pure SHOKU was hard and it extracted the pre-road, it exchanged. Since the spring rate is set up according to one-person riding, the goods here have a stepless pre-road and it can adjust them by a screw type, it is possible to
Since it bounded even if pure SHOKU was hard and it extracted the pre-road, it exchanged.
Since the spring rate is set up according to one-person riding, the goods here have a stepless pre-road and it can adjust them by a screw type, it is possible to arrange according to one's weight and stage it runs.
On the chassis frame and body construction of a scooter, although it does not go to amenity at the place that a fine gap continues, it moves by the usual run flexibly and can enjoy a sporty run.
Moreover, since there are 5 colors of lineups, he can choose out of his coloring and favorite color of a motorcycle, and can enjoy himself also for appearance.
View detail
Since near the center is narrow, it is useful to fasten a rope etc. to except. Since it is practical although it is a splendid price when two right and left buy it, they are four stars.
Since near the center is narrow, it is useful to fasten a rope etc. to except.
Since it is practical although it is a splendid price when two right and left buy it, they are four stars.
View detail
Fits: KAWASAKI Zephyr 750, KAWASAKI Zephyr 750RS
Since the liter machine of the other company was not equipped and admiration had the front in it a little lightly at the zephyr although it was the initial adjuster which is equipped standardly, it decided on purchase. A trial run is carried out, sinc
Since the liter machine of the other company was not equipped and admiration had the front in it a little lightly at the zephyr although it was the initial adjuster which is equipped standardly, it decided on purchase.
A trial run is carried out, since hardest setting out is first used with an adjuster after wearing and change with normal is felt, as a snap, the admiration of comment is lost lightly, its appearance is also racy and they are very much pleased with it.
After wearing, since it had not rushed in so much, the pleasure adjusted to oneself liking still increased.
View detail
It is in play with which ZRX1100 is equipped. The texture of the structure itself is also high at a beauty. It will be a satisfactory level, if it gets used although clearance was larger and it was worrisome that a tightly and a screw do not faste
It is in play with which ZRX1100 is equipped.
The texture of the structure itself is also high at a beauty.
It will be a satisfactory level, if it gets used although clearance was larger and it was worrisome that a tightly and a screw do not fasten and put.
Looks also became a spartan circumference [ of a front ] impression.
They are favorite parts as individually as the touch which is not asserted too much in Faulk's bottom case and the same color being astringent.
The engine performance can also be felt firmly.
He was reliable at the corner so that many people might say, and sense of stability came out in the breaking from a high speed.
Although it is a little expensive, they are parts which can carry out a recommend to the direction which is wavering.
View detail
Since it changed into the separate handle, it equipped. Change was felt some as a dramatic change by the good thing with which it equips although it does not become precocious. Since it is not so expensive if it may think from a price and may be m
Since it changed into the separate handle, it equipped.
Change was felt some as a dramatic change by the good thing with which it equips although it does not become precocious.
Since it is not so expensive if it may think from a price and may be made a separate handle, it is a recommend.
View detail
Fits: KAWASAKI ZRX400, KAWASAKI ZRX400
It had attached to the 94 model ZRX. A higher vehicle goes up considerably. Moreover, since Sas had also changed into the ohlins, it is with some oversteer. Considerably a front falls and it becomes a front load. We recommend you attachmen
It had attached to the 94 model ZRX.
A higher vehicle goes up considerably.
Moreover, since Sas had also changed into the ohlins, it is with some oversteer.
Considerably a front falls and it becomes a front load.
We recommend you attachment after considering affinity with a front well.
Moreover, side stands incline considerably.
Is it better to change together?
Appearance is whether although it becomes quite good, tastes differ.
About wearing, it is not so difficult.
It will not take 1 hour, if even how to remove rear suspension is known.
View detail
Fits: DUCATI STREETFIGHTER848, DUCATI STREETFIGHTER, DUCATI STREETFIGHTER
It attached by itself instantly. if it is preparing, troubles will be suffered very much and it will meet -- although it came out and carried out, if it advances like a puzzle ring, considering a procedure, it can attach well. It is the blood of D
It attached by itself instantly.
if it is preparing, troubles will be suffered very much and it will meet -- although it came out and carried out, if it advances like a puzzle ring, considering a procedure, it can attach well.
It is the blood of DUCATI that not only a design but serviceability is designed firmly.
It is necessary to fix a front like a picture and to float a rear swing arm thoroughly.
since I was exchanging steps previously, I am satisfactory -- it is -- although -- since a jack stand does not start in case of the retractable step of normal, it will hang from head lining with a chain block etc.
a tank is removed -- although it is unnecessary, the black panel of the bottom both sides of a sheet is removed.
The adjustable rod is lengthened with the rear stand hung, and it moves to the location whose upper part bolt head of a link rod can be thoroughly seen from the crevice between frames.
A bolt is loosened, a rear stand is removed and a swing arm is floated.
If a bolt is pulled out by hand and a rod is removed, a swing arm will serve as bra~N.
A swing arm is supported and adjusted with the jack for four flowers so that the upper part bolt head of a rear suspension unit may become a location which looks perfect.
If a bolt is pulled out, the existing link arm can move to a free.
The rest loosens and pulls out the fulcrum bolt of the center of a link arm, and removes a link arm.
Shafts clean, it applies each part grease and constructs it by a reverse order.
Also when constructing, moving an arm, the location of a bolt is decided, and it fastens and is crowded.
The 8-mV bolting torque of the circumference of a link is 42N (you should use, if a torque wrench enters and meets).
Since the link rod attached the thing made from BabyFace from the start, it was used as it is, but it was able to construct satisfactorily.
Having straddled also sinks and the difference in Ho is known.
It is pleasure to pack setting from now on.
View detail
Although it is somewhat expensive, as it is, it is effective. Since it thought that a front was slightly too soft, it can somewhat harden now. It is broken whether an effect rides to the extent that it can be felt, and it is clever. It is reco
Although it is somewhat expensive, as it is, it is effective.
Since it thought that a front was slightly too soft, it can somewhat harden now.
It is broken whether an effect rides to the extent that it can be felt, and it is clever.
It is recommended!
View detail
Fits: HARLEY-DAVIDSON XLH883, HARLEY-DAVIDSON XLH1200, HARLEY-DAVIDSON XLH883, HARLEY-DAVIDSON XLH1200
It attached to XLH883 of 01 models. The lowdown of the front has not carried out. Although attached in the state, the upper part (diameter of an inner tube), the lower part (diameter of an outer tube), and die length were cinch. A lower path i
It attached to XLH883 of 01 models.
The lowdown of the front has not carried out.
Although attached in the state, the upper part (diameter of an inner tube), the lower part (diameter of an outer tube), and die length were cinch.
A lower path is a size in which the outer circumference of an outer tube hides.
Therefore, it can equip from a pure outer tube fork cover.
Although the stop was a cable tie, since the size had come out firmly, slack did not come out at all.
In addition, it is related with attachment.
Although it is not related to goods, it is necessary to extract Faulk.
Although a caliper is removed in that case, the bolt which is fixing the caliper is 12 mm in 12 angles.
Since it is not an inch, let's take care.
View detail
A feeling of SUKASUKA of normal is lost and it comes to be able to perform the stable run. Although the amount of money is high, it is ideal for super-distance and high speed driving.
A feeling of SUKASUKA of normal is lost and it comes to be able to perform the stable run.
Although the amount of money is high, it is ideal for super-distance and high speed driving.
View detail
Fits: KAWASAKI GPZ900R, KAWASAKI GPz1100, KAWASAKI ZRX400II, KAWASAKI ZRX400, KAWASAKI ZEPHYRX, YAMAHA TRX850, KAWASAKI ZEPHYR750
Attachment is very easy, it becomes racy touch, a corner can turn at the touch which ran compared with wearing before that there is nothing uneasy, and it equips with it, and it also regards appearance as good.
Attachment is very easy, it becomes racy touch, a corner can turn at the touch which ran compared with wearing before that there is nothing uneasy, and it equips with it, and it also regards appearance as good. View detail
When compared with normal, the way of gathering with an uneven road became soft.
When compared with normal, the way of gathering with an uneven road became soft. View detail
Fits: HONDA monkey, HONDA monkey
rear suspension outside carries out -- the completion of easy wearing!! It has renewed to good touch!! it is easier to carry out a jack-up -- ~
rear suspension outside carries out -- the completion of easy wearing!! It has renewed to good touch!! it is easier to carry out a jack-up -- ~ View detail
Shortly after having bent in the curve, he notices that a feeling differs from the time of not having equipped. At the time of a cornering, I think that rigidity became high since a totter, vibration, etc. were lost. As dress-up parts, since it is
Shortly after having bent in the curve, he notices that a feeling differs from the time of not having equipped.
At the time of a cornering, I think that rigidity became high since a totter, vibration, etc. were lost.
As dress-up parts, since it is cool, it is recommended.
View detail
Fits: HONDA monkey, HONDA monkey
I think that attachment is easy and it is what is not understood unless it is those who understand. It is w which I regard as appearance looking thick.
I think that attachment is easy and it is what is not understood unless it is those who understand.
It is w which I regard as appearance looking thick.
View detail
After exchanging rear suspension, cfc TOSASU felt it soft and there was uneasiness. Although what is necessary is just to all also have exchanged cfc TOSASU, it is hard-pressed pocketbook and exchanged springs. After exchanging, the touch which th
After exchanging rear suspension, cfc TOSASU felt it soft and there was uneasiness.
Although what is necessary is just to all also have exchanged cfc TOSASU, it is hard-pressed pocketbook and exchanged springs.
After exchanging, the touch which the breaking which was uneasy until now becomes brave, and is holding the road surface mounted.
It is the data about SETTENGU sent together with goods that was glad.
It was saved.
Moreover, going to a peak by this became pleasure.
View detail
It is liable to a full bottom at the time of a full brake, and exchanged for the undercowl interference prevention in the uneven level difference with normal.
It is liable to a full bottom at the time of a full brake, and exchanged for the undercowl interference prevention in the uneven level difference with normal. View detail