Reviews
Fits: HONDA CBR600RR, HONDA V - TWIN MAGNA S (TWIN MAGNA), HONDA REBEL500, HONDA REBEL250, HONDA REBEL250, HONDA X-ADV, HONDA X-ADV, HONDA X-ADV, HONDA V - TWIN MAGNA S (TWIN MAGNA), HONDA VT1300CR, HONDA VTR, HONDA VTR, HONDA VRX Roadster (R100 ROADSTER), HONDA VRX Roadster (R100 ROADSTER), HONDA VFR(800), HONDA VFR400R, HONDA VFR400R, HONDA VFR400R, HONDA SHADOW Slasher (Shadow slasher), HONDA SHADOW Slasher (Shadow slasher)
For CB250F
Same as the genuine Front Fork Dust Seal . About shipping and packaging Very good packaging.Fast shipping no way to dammage. About quality and texture Products to buy together realy genuine product. good qulity.Thanks to the webike team View detail
Fits: HONDA CB650F, HONDA CB400 SUPER FOUR (Super FOUR license training vehicle), HONDA NC750S, HONDA NC750S, HONDA CBR600F, HONDA CB650F, HONDA CBR600RR, HONDA CBR600F, HONDA Fire Storm (VTR1000F FIRESTORM), HONDA Fire Storm (VTR1000F FIRESTORM), HONDA Fire Storm (VTR1000F FIRESTORM), HONDA Fire Storm (VTR1000F FIRESTORM), HONDA CTX700N Dual Clutch Transmission, HONDA CTX700N, HONDA CTX700, HONDA CB-1 TYPE II, HONDA CTX700 Dual Clutch Transmission, HONDA CB-1, HONDA CBR650F, HONDA CBR650F
Front Fork Oil Seal Set For CB250F
good quality and great deal from Webike, super fast international shipping, very well packaged and a reasonable price, thanks Webike team great! View detail
Fits: HONDA CB650F, HONDA CB400 SUPER FOUR (Super FOUR license training vehicle), HONDA NC750S, HONDA NC750S, HONDA CBR600F, HONDA CB650F, HONDA CBR600RR, HONDA CBR600F, HONDA Fire Storm (VTR1000F FIRESTORM), HONDA Fire Storm (VTR1000F FIRESTORM), HONDA Fire Storm (VTR1000F FIRESTORM), HONDA Fire Storm (VTR1000F FIRESTORM), HONDA CTX700N Dual Clutch Transmission, HONDA CTX700N, HONDA CTX700, HONDA CB-1 TYPE II, HONDA CTX700 Dual Clutch Transmission, HONDA CB-1, HONDA CBR650F, HONDA CBR650F
CB1100 Fork Seals
Another great deal from Webike, super fast international shipping, very well packaged and a great price, thanks Webike you guys are great! View detail
Fits: HONDA Rebel250, HONDA Rebel500, HONDA Rebel300, HONDA Rebel300
Diverted to CL250
It is for REBEL250, and a certain shop had released a video of it being installed.
I tried to imitate and install it.
The Fork diameter of REBEL and CL250 are the same, but the Pitch of the Top Bridge and Bottom bracket are different, so an O-ring (*) is added and adjusted for installation.
Still, it is a little short and the Rubber at the bottom protrudes a little.
Since someone has already explained how to install it, we will omit it here.
*Please enter the following as a Quantity:Pair (for Left and Right) We prepared two of them, one for each.
HondaOEM Parts：91301-428-003
OLINK 35.5X3 (NOK)
I thought it was a plastic part until it arrived, but it was made of steel and had a nice texture,
The front is blacked out, which tightens it up considerably.
It's only an OEMOption.
The non-reusable bolts (Caliper bolt, FenderMounting bolt) that are removed in the process required for replacement are securely attached and can also be used on the CL250.
There are a variety of similar parts available, but they are very affordable as long as you can install them on your own.
(I think the labor cost will be more expensive if you ask the Shop to do it for you.)
However, there are two drawbacks.
First:Low accuracy of installation.
It is fixed between the Blinker and the bottom bracket.
The inner diameter of the Fork Guard is 1.5mm wider than the Fork Diameter.
When the Cover is shaken, the top of the Cover hits the Fork inside and makes a cracking sound.
It should be installed in the same condition in REBEL's SEdition.
Unlike the REBEL, the CL250 is a vehicle designed for driving on rough roads.
It will definitely scratch the Fork due to internal rubbing and vibration.
If it is the top of the Fork, it is functional even if it is scratched.
It would be strange to see more scratches because of the Cover.
Rubber sheet was wrapped inside to prevent vibration.
0.Wrap a 5mm-thick rubber sheet around the interior and attach only a portion of 1mm.
The former alone still moves, so I use a combination of different thicknesses.
0.If you wrap 5mm and 1mm half way around each, it should be perfectly fixed.
We gave a little extra room because it would be troublesome if the rubber deteriorated and became stuck or shifted during installation.
Second:Water gets in, it doesn't get out.
There is a slight overlap with the first one, but there is a gap between Fork and Cover.
Avoid high water pressure when washing the car with or without the addition of Rubber Sheet.
The rubber attached to the bottom is firm enough so that even if water gets inside, it won't come out from the bottom.
Both Fork and Cover are rusty.
To be precise, the iron Cover rusts first, and the Fork receives rust.
It is recommended for CL250 as well, although some work is required.
View detail
Fits well on my Honda Bros / NT 400
About quality and texture Great Quality! About the feeling of use I'm at ease now during the rain that my fork inner tubes will be protected Products to buy together Difficulty of installation 3/5 - Have to remove forks from Triple Tree Cost performance and comparison with other products It's alright. This product is originally intended for Rebel 500. But measurements say it can fit my bike About shipping and packaging Came in a well packaged box with the appropriate screws Any concerns, cautions, or advice when purchasing View detail
Fits: HONDA CB650F, HONDA CB400 SUPER FOUR (Super FOUR license training vehicle), HONDA NC750S, HONDA NC750S, HONDA CBR600F, HONDA CB650F, HONDA CBR600RR, HONDA CBR600F, HONDA Fire Storm (VTR1000F FIRESTORM), HONDA Fire Storm (VTR1000F FIRESTORM), HONDA Fire Storm (VTR1000F FIRESTORM), HONDA Fire Storm (VTR1000F FIRESTORM), HONDA CTX700N Dual Clutch Transmission, HONDA CTX700N, HONDA CTX700, HONDA CB-1 TYPE II, HONDA CTX700 Dual Clutch Transmission, HONDA CB-1, HONDA CBR650F, HONDA CBR650F
In stock preservation
We buy in stock to be able to respond immediately to any repairs that may come in, and this Manufacturer is a Repeater, which means it is cheaper and will last as long as an OEM Product. View detail
Fits: HONDA Rebel500, HONDA Rebel250, HONDA Rebel300, HONDA Rebel300
A perfect fork cover
A perfect fork cover that can be easily installed if you have right tools. This products can protect the fork well and help it prevents getting rust too. View detail
Fits: HONDA CB650F, HONDA CB400 SUPER FOUR (Super FOUR license training vehicle), HONDA NC750S, HONDA NC750S, HONDA CBR600F, HONDA CB650F, HONDA CBR600RR, HONDA CBR600F, HONDA Fire Storm (VTR1000F FIRESTORM), HONDA Fire Storm (VTR1000F FIRESTORM), HONDA Fire Storm (VTR1000F FIRESTORM), HONDA Fire Storm (VTR1000F FIRESTORM), HONDA CTX700N Dual Clutch Transmission, HONDA CTX700N, HONDA CTX700, HONDA CB-1 TYPE II, HONDA CTX700 Dual Clutch Transmission, HONDA CB-1, HONDA CBR650F, HONDA CBR650F
Lowest price ^^^.
Lowest price. Cheap and with points! And fast delivery! View detail
Fits: HONDA CB650F, HONDA CB400 SUPER FOUR (Super FOUR license training vehicle), HONDA NC750S, HONDA NC750S, HONDA CBR600F, HONDA CB650F, HONDA CBR600RR, HONDA CBR600F, HONDA Fire Storm (VTR1000F FIRESTORM), HONDA Fire Storm (VTR1000F FIRESTORM), HONDA Fire Storm (VTR1000F FIRESTORM), HONDA Fire Storm (VTR1000F FIRESTORM), HONDA CTX700N Dual Clutch Transmission, HONDA CTX700N, HONDA CTX700, HONDA CB-1 TYPE II, HONDA CTX700 Dual Clutch Transmission, HONDA CB-1, HONDA CBR650F, HONDA CBR650F
very poor quality
In the beginning, I bought a pair of shock-absorbing oil packages with the good quality of the Japanese brand, and the oil leaked again less than a month ago! The quality is very unsatisfactory, and the customer service feedback manufacturer actually said that it is rust, what color is the rust, what color is the oil, can I not distinguish? -------------------------------------------------- -------- At the beginning, I bought a pair of shock absorption oils with a good quality of the Japanese brand in less than a month and leaked oil! The quality is very unsatisfactory, and the customer service feedback manufacturer actually says it is rust. What color of the rusty oil is it? Powered by Google Translator View detail
Fits: YAMAHA SR400, YAMAHA SR400, HONDA REBEL250, HONDA REBEL500, HONDA Rebel300
Looks better Parenthesis.
I bought this because I wanted to go lower overall on my Cafe racer.
There are a lot of lowdown suspensions, but I decided to use a stable one made by DAYTONA.
CustomIt is relatively easy to install even for amateurs.
It's dangerous if you don't adjust the Chain and check the interfering parts of the Wiring and Rear Fender, so be careful there!
The ride doesn't get any worse, but there is a bit of impact only at the bumps, so I try to avoid them.
I get a creaking sound when I do, is that a thing? Or is it an adjustment issue?
Overall, I am satisfied with this product.
View detail
Fits: HONDA Rebel250, HONDA Rebel500, HONDA Rebel300, HONDA Rebel300
More and more Stylish
It's been two months since I installed it, and I've heard from acquaintances The Matte look just got even better. He praised me.
SteelCB400T is not bad, but Black makes Rebel even cooler.
It protects Rust etc. of CB400T and I feel very happy to install it.
We recommend installing at the same time as Boots.
View detail
HONDA fork upper tube cover
This is purchased together with other original accessories, a set of two left and right, good workmanship, matte black. Because the front fork needs to be removed for installation, it is recommended to add the front fork dust cover when purchasing. It can be done only once, and the installation is more trouble-free. I bought a lot of original parts, so go to the car dealer to ask the master to help install them. When the whole set is installed, it looks more retro from the front, and one set is all black, and the original small windshield is also added. Basically, the dust protection cover and the upper tube cover are necessary accessories for the rebel500 car. ---------------------------------------------- This was buy with other original accessories, a set of two left and right, good workmanship, matte black. Because the fork needs to be removed for the installation, all recommended when buying plus the fork dust cover, remove once to get rid of, installation also more trouble . I bought more original parts and went to the dealership to ask the master to help me install them. The whole set looks more vintage from the front, and the set is all black, with the original small windscreen. rebel500, the dust cover and top tube cover are basically a must-have accessory. Powered by Google Translator View detail
![Front Fork Boots]](https://global.webike-cdn.net/photo/impression/6c/6c4a4e90609e1af01b13a4ab7c33de19L.jpg)
Fits: HONDA Rebel500, HONDA Rebel250, HONDA Rebel300, HONDA Rebel300
It's a lot cooler.
I had Front fork boots and Cover installed on my REBEL250 at the shop where I bought it.
It's so much cooler and more massive than before.
I sprayed the boots with RubberProtectant, which I bought at the same time from Webig, and protected the rubber.
I didn't spray it directly, but sprayed it once on a cloth and then used that cloth to apply it.
I looked at a lot of shops, but Webig was the least expensive.
I feel that it is a good Shop with careful packaging.
I asked for delivery by Yamato delivery service which has no mistake though it becomes 100Yen additional.
View detail
![Front Fork Boots]](https://global.webike-cdn.net/images/reviews/154/00001015154L.jpg)
Fits: HONDA Rebel500, HONDA Rebel250, HONDA Rebel300, HONDA Rebel300
HONDA original quality
I saw this rebel500 dust cover on the Honda Dreamwing show car, but was told that it was out of stock. Fortunately, webike has this product. Buy it at the first time, and when you get it, it is still the original fragrance. The material and workmanship are unmatched by those imitations. After installation, my friends say it is beautiful! ---------------------------------------------- I have always liked Komine's products. I bought a cycling jersey for the first time and found that many details of this brand are very unique. I bought the headgear earlier, and after using it for a long time, it hasn't become deformed even after cleaning it for N times. I bought another one this time. In addition to being tight and smooth, I also found that the design can also be used to plug a mask. I was very thoughtful! If the price can be cheaper, buy more replacements. Very recommended Powered by Google Translator View detail
![Front Fork Boots]](https://global.webike-cdn.net/images/reviews/786/00001014786L.jpg)
Fits: HONDA Rebel500, HONDA Rebel250, HONDA Rebel300, HONDA Rebel300
Fork protection sleeve
I didn’t buy it before, and I felt a little retro temperament. Later, I found that the original factory has a front fork protective cover. I started with decisiveness. Although the installation is a bit more troublesome, the temperament will go up after the installation. The overall look is more coordinated, and the quality is still good. The injection molding process is very good, effectively avoiding the wear and tear caused by the dust and stone particles in daily riding, and the protective cover will not be damaged if the car is broken. A set of two, direct mail from Japan. ---------------------------------------------- I did not buy it before, because I feel it is less retro temperament, but when I found that the OEM part has a fork protection cover, I decided to buy it. Although it is troublesome to install some after the installation of the temperament will go up, it looks more coordinated overall, the quality is still good, the injection molding process is quite good, effective to avoid daily riding dust and stone particles bring to wear. I feel that even my motorcycle has broken this protective cover still ok, this commodity a set of two sets, it is sent from Japan so that people can trust it. Powered by Google Translator View detail
Fits: HONDA Rebel250, HONDA Rebel500, HONDA Rebel300, HONDA Rebel300
Fork upper tube cover
Purchased with the following protective covers, a set of two. If you install it, you'd better buy it up and down together, otherwise the front fork will have to be disassembled twice, so I bought two pairs of up and down at once. In addition to being good-looking, it is good-looking, otherwise the color of the black front fork showing a section of stainless steel is really not good-looking. The workmanship is perfect, and there is no need to worry about the quality of the original factory. It is recommended to purchase, and it is recommended to purchase the next set at the same time. ---------------------------------------------- Purchased together with the following protective cover, a set of two. It is best to buy the upper and lower together if installed, otherwise the fork will have to be removed twice, so buy the upper and lower pair at once. In addition to good-looking is good -looking, otherwise the black fork exposed a section of stainless steel color is really not good-looking. The workmanship is perfect, no worries about the quality of the original factory. Recommended to buy, more recommended to buy the upper and lower set at the same time. Powered by Google Translator View detail
![Front Fork Boots]](https://global.webike-cdn.net/images/reviews/753/00001012753L.jpg)
Fits: HONDA Rebel500, HONDA Rebel250, HONDA Rebel300, HONDA Rebel300
Honda Front Fork Dust Boot
Honda front fork dust cover is affirming the quality of the original accessories. I saw the configuration of the car in the showroom. This front plug dust cover decided that my car should also be equipped with this front plug dust cover. I believe it is beautiful and capable. Achieve the effect of dust prevention to avoid the sand and dust during the driving process of the vehicle from sticking to the front fork and causing damage to the front fork. It will be installed immediately after the vehicle is delivered. The only drawback is that there is no original manufacturer's part number sticker on the package! --- -------------------------------------------------- ----- Honda fork dust cover, for the quality of original parts is yes, see the car boot configuration section forward runs to determine their own cars must also be installed on the dust jacket of this forward runs in between shows, I believe that beautiful but achieve the effect of dust during vehicle running to avoid dust from sticking to the fork and then damage to the front fork, immediately after delivery of the vehicle to be fitted, the only fly in the ointment is not the original item number sticker on the packaging! Powered by Google Translator View detail
Fits: HONDA Rebel250, HONDA Rebel500, HONDA Rebel300, HONDA Rebel300
Honda fork top cover
The Honda front fork cover, Honda's original fork accessories and the original front fork cover are blackened visually, which is quite concise, and can effectively protect the motorcycle front fork from damage caused by sand and gravel impact during driving. The installation after delivery is believed to be a great bonus to the appearance of the car. The original Honda part number sticker on the outer packaging is a bonus item! -------------- -------------------------------------------- Honda cover the front fork, the front fork accessories with the original Honda original overall sheath fork is simple blackening visually, and can effectively protect damaged during running motorcycle fork gravel impact caused to be present after delivery of the vehicle to install believe there is a lot of extra points on the exterior of the car, there is on the packaging of Honda original part number sticker is very plus project! Powered by Google Translator View detail
I wish I'd bought it sooner! Very good!
Installed on REBEL250
Before the exchange, it was bouncing and undulating at Corner, and Front at the last second to stop at the light I'm going to pull it out or something, and while I don't feel any minor bumps at all, I'm going to jump up and down on rough surfaces I had to be prepared to go faster than that
It sticks and doesn't bounce around, stops at traffic lights and doesn't bounce around on rough surfaces
Large Satisfied! It's like a different motorcycle! I'm assuming you mean "Large"
To install the PD Valve, you need to drill the hole for the ForkCylinder It said it needed to be modified, but I installed it without any modification
With the least amount of pre-road applied, the current riding style is sufficient, but the cornering performance is I'm sure I'll be tweaking the improvements in the future
View detail
Fu Caphka's Normal fork is made firm
When entering a corner, the Brake is slowed down by the fluffy Normal fork with a soft Caphica I introduced the Kit as soon as it was sold because I sometimes find it difficult to ride it
If you have upgraded the Rear, the weakness of the Front will be more pronounced, and the front and rear of the load will be You can compensate for geometric distortions in BirdBalance
The riders were able to feel the roughness of the pavement and the bumps in the road surface and handle the vehicle with confidence It is
Fork Spring went from a NORMAL inequality length to an etc. length, and the Rate became a little bit longer Because it goes up, the pre-road itself is firm even if it is removed Because the specification of Fork oil was not written, I put in C10 of OEM It's a fast returning Touch, so I'm going to have to use the KYB #20 per #20 in the next Fork oil change timings I'd like to try it out
As for the kit, it's an all-in-one kit that simply needs to be reassembled, so it's more affordable than buying it from RoseRose It is
Installation is for those with ForkMaintenance experience
View detail