Reviews
Fits: HONDA CT125, HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA CROSS CUB, HONDA SUPER CUB110 PRO, HONDA SUPER CUB 50 PRO
Shock absorber with limited CROSS CUB50cc compatibility
I was looking for Shock absorber due to OEM fluff, but only Mukawa and Endurance had it as 50cc compatible by Manufacturer.
The damping force can be adjusted to 5 levels, and although I ran the car in the softest state, it felt much stiffer and more firmly planted than the OEM.
Red Nut in the picture is SP Mukawa Rear shock mountNut8 hole Red 06-06-0020
View detail
Fits: HONDA CROSS CUB, HONDA CROSS CUB50, HONDA CT125, HONDA CROSSCUB110, HONDA CT125
improve one's footing
Footing is slightly better.
This makes the Side Stand longer, or the Motorcycle less inclined and unstable, and the Center Stand harder to apply.
Ride quality is better than OEM.
Now we'll see how durable it is
View detail
The security of having your feet on the ground
My wife, who is just under 160cm tall, started riding a CT110 HUNTER CUB, but she is a complete ballerina and has had some bumps and bruises. She was worried about it, so I replaced it with TWRLow seat.
The low seat did not have much effect, but this 40mm Down Suspension worked perfectly, and he was pleased that although his heels floated, the feeling of security was completely different.
As far as my test run is concerned, I think the convergence after the Gap has improved compared to NORMAL. It seemed to converge smoothly and without any lingering aftermath without bouncing around.
However, be careful not to bank too deep, as the Gap during the Corner ring may cause either the Center Stand or the Knee Slider to make contact.
View detail
Fits: HONDA 6V Gorilla, HONDA 6V Monkey, HONDA monkey, HONDA 12V GORILLA, HONDA 12V MONKEY, HONDA MONKEY BAJA
Nice and simply styled to match the overall original look of the bike
About quality and texture, I can confirm that the quality is great and that the material used is steel with a mixtures of chrome plating for the shock body and gloss red powder coating for the springs. About the feeling of use, I am excited to now have adjustment available via the 5-way preload collar for when adding additional weight and they are nice and simply styled to match the overall original look of the bike. Products to buy together, An inner fork upgrade kit from the likes of Tanaka Trading would also be ideal to add to your cart to make the bike more useable in all riding conditions. Difficulty of installation, I can say the fitment of the rear shock absorbers was very easy due to the simple nature of the task and ease of access to the mounting nuts. Cost performance and comparison with other products, The pricing of this product is great as you are receiving a nicely styled set of shocks with quality surface finishes. Other popular brands do start their line-up with lower pricing but the same features. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Fits: HONDA MONKEY125, HONDA DAX125, HONDA MONKEY125, HONDA MONKEY125, HONDA MSX GROM, HONDA MSX125SF, HONDA GROM
It's really pretty and luxurious.
I removed the handle, replaced it, and reassembled the handle. Since I couldn't do it myself, I went to a repair shop and asked for it. I tried to be as careful as possible to avoid damaging the bolt when tightening it after replacement, but small scratches were unavoidable. The body was made of aluminum, so the scars are not visible and it looks natural. Very pretty and satisfactory. In reality, it looks very luxurious --------------------------------------------- ------------- After separating the handle, it replaced it and assembled the handle again. I couldn't do it myself, so I went to the repair shop and asked. When I was replaced, I was as careful as possible to prevent the bolts from hurt, but the small wounds were inevitable. The body is chosen as aluminum, so the wound is hard to see and natural. Very pretty and satisfactory. Actually, it is very luxurious Powered by Google Translator View detail
Fits: HONDA monkey, HONDA monkey, HONDA monkey, HONDA DAX, HONDA Super Cub 50, HONDA little cub, HONDA little cub, HONDA GORILLA, HONDA GORILLA, HONDA SUPER CUB 50, HONDA SUPER CUB70, HONDA SUPER CUB 90, HONDA SUPER CUB110
I am excited to now have adjustment available via the adjustable preload nut
About quality and texture, I can confirm that the quality is great and that the material used is aluminum with a silver finish for the shock body and steel with a gloss red powder coating for the springs. About the feeling of use, I am excited to now have adjustment available via the adjustable preload nut for when adding additional weight and they are nicely styled to match the original look of the bike. Products to buy together, A fork spring upgrade would also be ideal to add to your cart to make the bike more useable in all riding conditions. Difficulty of installation, I can say the fitment of the rear shock absorbers was very easy due to the simple nature of the task and ease of access to the mounting nuts. Cost performance and comparison with other products, The pricing of this product is good as you are receiving a nicely styled set of shocks with high quality materials being used. Cheaper options are available from other brands but with lower quality materials. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Nicely styled and with some adjustment available
About quality and texture, I can confirm that the quality is great and that the material used is steel with a mixtures of chrome plating for the shock body and gloss black powder coating for the springs. About the feeling of use, I am excited to now have adjustment available via the 5-way preload collar for when adding additional weight and they are nice and simply styled to match the overall original look of the bike. Products to buy together, A fork spring upgrade would also be ideal to add to your cart to make the bike more useable in all riding conditions. Difficulty of installation, I can say the fitment of the rear shock absorbers was very easy due to the simple nature of the task and ease of access to the mounting nuts. Cost performance and comparison with other products, The pricing of this product is great as you are receiving a nicely styled set of shocks with quality surface finishes. Other popular brands also start their line-up with similar pricing and features. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Fits: HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY BAJA
Lowdown
We selected this suspension for the lowdown. The ride quality is a little firm, but it is a very good suspension with a firm footing at the back.
It is wonderful that there is no weird slamming or thrusting like the OEM suspension, and I was able to firmly downshift 40mm.
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB70, HONDA SUPER CUB70, HONDA SUPER CUB70, HONDA SUPER CUB70, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA MONKEY125, HONDA DAX, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 90
โช็คหลัง takegawa อันนี้โอเคเลยปรับตั้งให้น้ำหนักให้เข้ากับคนขี่ผมว่าเป็นโช็คที่ดีตัวหนึ่งเลยครับ อาจจะเรียบๆหน่อย View detail
Fits: HONDA MSX125SF, HONDA GROM, HONDA GROM, HONDA MSX GROM, HONDA MSX125
High cost!
Installed on jc92 (change from OEM suspension)
【It was good point】
I tried it on without adjusting it and it was not too hard or too soft (I have back pain and it was just right). (It was just right for me, who has back pain.)
The shock on the road surface is well canceled out.
Which difference is felt.
Great price, great service, great price! Recommended for an introduction to sass!
[Bad point].
Instruction Manual is confusing in WhiteBlack.
When the suspension is installed, it is necessary to remove the suspension once to adjust the ride height because it rises up.
View detail
Fits: HONDA CROSS CUB, HONDA CROSS CUB50, HONDA CT125, HONDA CROSSCUB110, HONDA CT125
It is only a 2.5 cm lowdown, but it totally changes the feel of the footing.
Was the one you received as per Image?
Endurance of All Black Spec. was sold out? I bought this one because the All Black Spec.
Satisfied with both texture and lowdown.
Was the installation difficult?
Since the existing Nut is removed and popped on, it can be installed in less than 10 minutes.
Note that since it is a LowdownSpec. the OEMSuspension cannot be hooked up unless both are removed.
If you remove both Suspensions, the Tire will fall off, so do not injure yourself.
How was your experience with it?
Looking at the numbers alone, it does not seem to have much effect, but it is a completely different world.
I want the Seat height to be this high from the beginning.
Installation Point or hang
It's an easy Custom that only requires removing four Bolts, so I urge you to do it yourself.
Torque management is a good idea.
View detail
Fits: HONDA MSX125SF, HONDA MSX125, HONDA MSX GROM, HONDA GROM, HONDA GROM
We're flying.
Product Name
Rear shock absorber
Item Number
06-04-0062
Vehicles
Grom (JC61)
Number of man-hours
About 2 hours
Required Tools
Torque wrench, Hexagon socket, Hexagon socket, Extension bar, Combination wrench, Hammer, Pliers system, Jack-up
Why did you choose this product?
I chose this product to improve the hardness of the Seat and the movement of the Rear Suspension on my Grom. I chose this product because I wanted to improve the stiffness of the Seat and the movement of the Rear Suspension on my Grom.
Was the one you received as per Image?
It was just like the Image. The color is Red, which I like. The paint is solid and I think it will last for a long time.
Was the installation difficult?
I don't think it is particularly difficult if you have Jack-up. Also, I was different, but it seems that some Torque cars have the Rear Suspension installed. If you lick it, you will have a large problem, so please work with caution.
How was your experience with it?
This is impressive. It is like riding a completely different motorcycle. The pre-road adjustment allows you to customize it to fit your needs. I use it on my commute to work, and I can feel the difference even during that commute.
[Included Parts:were they on?
Spring pre-roadAdjusting Wrench was attached.
[Was there anything that disappointed you?
I would like to have a rubberretc. on the Spring pre-roadAdjusting Wrench because it gets scratched when using the Spring pre-roadAdjusting Wrench to make adjustments.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: HONDA CT125, HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA CROSS CUB, HONDA SUPER CUB110 PRO, HONDA SUPER CUB 50 PRO, HONDA CT125
Nicely styled and with some adjustment available
About quality and texture, I can confirm that the quality is great and that the material used is steel with a mixtures of chrome plating for the shock body and gloss black powder coating for the springs. About the feeling of use, I am excited to now have adjustment available via the 5-way preload collar for when adding additional weight and they are nice and simply styled to match the overall original look of the bike. Products to buy together, A fork upgrade kit from the likes of YSS would also be ideal to add to your cart to make the bike more useable in all riding conditions. Difficulty of installation, I can say the fitment of the rear shock absorbers was very easy due to the simple nature of the task and ease of access to the mounting nuts. Cost performance and comparison with other products, The pricing of this product is great as you are receiving a nicely styled set of shocks with quality surface finishes. Other popular brands also start their line-up with similar pricing and features. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Fits: HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY125, HONDA MONKEY BAJA, HONDA MONKEY125
Rear suspension replacement Parenthesis good!
We felt that the OEM Suspension was a little soft, so we replaced it with SP Mukawa Suspension.
The look and feel has changed from the cute OEM look to a Large person-like look with Chrome plating, which is a nice touch.
However, I was a little disappointed that the edges of the Seal were a little peeled off.
View detail
Fits: HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY125, HONDA MONKEY BAJA, HONDA MONKEY125
Rear suspension replacement Parenthesis good!
The OEM Suspension felt soft, so it was replaced with SP Mukawa's product.
I like the look and feel of it, going from the cute OEM look to a little more Large person with the Chrome plating.
However, it is a little disappointing that the corners of the Seal were a little peeling off.
View detail
สินค้าถึงเร็วมากๆ สวยงามใช้งานดีครับ View detail
Fits: HONDA GORILLA, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY125, HONDA MONKEY BAJA, HONDA MONKEY125
Same Classic Look but Much Better Performing Rear Shocks for the Monkey
About quality and texture: I am happy with the quality of the 330mm rear shock absorbers from SP Takegawa. High quality chrome plated shock body and red powder coated spring are hard to pass on for the classic look. About the feeling of use: Even though they look very similar looking to the OEM Honda rear shock absorbers these ones from SP Takegawa have a more premium finish and there is no doubt they perform better, mainly due to their heavier rated springs. Products to buy together: Some heavier springs for the front forks would also be desirable to purchase alongside the 330mm rear shock absorbers. Difficulty of installation: The process to install takes about three quarters of an hour, 2 acorn nuts per shock and multiple washers are all that is involved to be removed and installed for the rear shock replacement. Not difficult to do. Cost performance and comparison with other products: Good costing as you are getting a high quality finished set of rear shock absorbers with performance that will suit most Monkey 125 riders and they are affordable as compared to most of the other options here on Webike which are much more expensive. About shipping and packaging: FEDEX and DHL shipping are the only options for rear shock absorbers which is quite expensive. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: Being the same length as the OEM Honda rear shock absorbers these are a straight swap with no adjusting of any others components of the Monkey, you just get a more suitable rated spring and pre-load adjustment. View detail
Good shocks
I bought these to try and modify for my Trail 90 and it didn't quite work out. The shocks themselves are nice and WeBike shipped right away. Note for other people that it's not a good option for a Honda Trail90. View detail
It's the right thing to do.
Compared to the standard Rear shock, there is less thrust over bumps, which is good.
It is easy to install and I recommend it.
View detail
Fits: HONDA MSX125SF, HONDA GROM, HONDA GROM, HONDA MSX GROM, HONDA MSX125
Rear Shock Absorber from SP Takegawa
* About quality and texture, Impressive looking shock with it's much larger in diameter spring coils are made from steel and powder coated red, while the shock body is made from steel and finished in a durable chrome plating. * About the feeling of use, The pre-load adjustment is really nice to have to be able to correctly setup for weight differences on the rear end. The performance is greatly improved on all surfaces and just being able to ride with no more concerns is fantastic. * Products to buy together, The front forks performance or lack of will be more noticeable now so a set of fork springs from Kitaco with the correct spring rate to suit your weight is what you also want to purchase to complete the suspension upgrades. * Difficulty of installation, Installation requires a lift to support the motorcycle from the subframe during the replacement and removal of the left body panel and wheel hugger to access the bolts. The process was completed in 40 minutes with no difficultly. * Cost performance and comparison with other products, A very reasonable prices rear shock absorber and a great product with it's good looks and performance which are well above the Honda OEM one. If you have more money to spend, then you can purchase a rear shock absorber with more features. * About shipping and packaging, I am happy to wait 8 weeks on average for my parts to arrive in Sydney Australia via Webike's sea freight which comes with tracking and insurance so I know I'm covered in case something was to go wrong but with there outstanding bubble wrapping and boxing there have been no problems. * Any concerns, cautions, or advice when purchasing, A very good choice for your average rider, no need for Ohlins. Use the product reviews to assist in making a decision on your purchase. View detail