Reviews
Fits: HARLEY-DAVIDSON SPORTSTER Family, HARLEY-DAVIDSON DYNA Family, HARLEY-DAVIDSON DYNA Family
Used for GSX250E
I bought it knowing that it does not fit. The inner diameter is 39Φ and the inner diameter of my car is 33Φ so naturally it is loose, but since it does not fit the outer diameter due to the Stubby installation, I dared to fix it loosely so that it can move freely up and down. The Inner is short and not traveled a lot, so it works well as a protector to protect from stepping stones on the Dirt. View detail
Fits: HONDA APE 100, HONDA XR100MOTARD, HONDA XR50 MOTARD, HONDA APE 50
VINO125
[How is it used?
Town ride
Was the installation difficult?
It was totally easy.
How was your experience with it?
Good quality
View detail
Refreshed
Fork Boots shrink when lowered, so we replaced these at the same time we replaced the front spring.
I really like the way it looks and Refreshing.
View detail
Fits: HARLEY-DAVIDSON XLH883, HARLEY-DAVIDSON XLH1200, HARLEY-DAVIDSON XLH883, HARLEY-DAVIDSON XLH1200
Dust BootsSize a little?
I have been scavenging for a Cafe racer style Tune?
I couldn't find one that fit my Inner diameter, so I bought it.
The Outer side was Oversize, so we made a cut and squeezed it.
Originally, an OEM Dust Seal was installed, so this is not a problem as it is only a visual match.
I believe I will purchase the same product again next time.
View detail
Fits: HARLEY-DAVIDSON XLH883, HARLEY-DAVIDSON XLH1200, HARLEY-DAVIDSON XLH883, HARLEY-DAVIDSON XLH1200
Dust BootsSize a little?
We were looking only on the Internet and could not find any cheap products with dimensions that matched our tuning,
I had no choice but to buy it.
The lower dimension did not match at all, but we added a little cut and stopped at the meeting.
This product is for the appearance of a cafe racer, as it originally comes with an OEM Dust Seal.
View detail
Fits: HONDA dachshund, HONDA dachshund, HONDA dachshund, HONDA dachshund, HONDA Dax 70, HONDA Dax 70, HONDA Dax 70, HONDA Dax 70, HONDA Shirley 50., HONDA Shirley 50., HONDA Shirley 70, HONDA Shirley 70, HONDA monkey, HONDA monkey, HONDA monkey
Recommended!
Recommended!
Motorcycle looks beautiful when it's beautiful. w
View detail
Fits: HONDA BENRY CD50, HONDA solo, HONDA Benly CD90, HONDA BENRY CD50, HONDA solo, HONDA Benly CD90
Mounted on CD50
Mounted on CD50
Pull out the fork, remove the OEM boots, and put them on.
Installation completed without problems.
View detail
Fits: HARLEY-DAVIDSON SPORTSTER Family, HARLEY-DAVIDSON DYNA Family, HARLEY-DAVIDSON DYNA Family
It didn't fit the low model before, but...
Will buy again. Now it's a Dyna Fork.
The stroke section is just right! It is easy and comfortable to install boots,,,
It's nice to be able to detach/attach to suit your mood.
And above all, it's my first webike transaction... I'm glad it was delivered safely and quickly to my home.
next time! I will be purchasing other Harley Davidson parts.
Thank you.
-------------------------------------------------- -------- Buy again. Now is a dyna fork. The stroke section is perfect! Boots are easy and comfortable ,,, It is good to be able to ride / attach to the mood. And most of all, this is the first deal of Webike... I am happy to deliver it safely from home. next time! I will buy another Harley Davidson part. Thank you. Powered by Google Translator
View detail
Fits: HONDA APE 100, HONDA XR100MOTARD, HONDA XR50 MOTARD, HONDA APE 50
Installation on gn125h
I installed it on a gn125h.
It also improves the appearance and prevents Fork rust.
View detail
Fits: HONDA BENRY CD50, HONDA solo, HONDA Benly CD90, HONDA BENRY CD50, HONDA solo, HONDA Benly CD90
The installation is Large but it is good for front fork protection!
[How is it used?
The Fork Dust Cover from DACHI cracked and only lasted a year and a half, so I switched to these Fork Boots to make them last a little longer.
Was the one you received as per Image?
The thickness of the Rubber felt thin, but the product is almost exactly as shown in the Image.
Was the installation difficult?
Large is odd because the entire front fork must be removed.
The process can be briefly summarized as follows
Headlight bracket removal
Blinker Bracket removal
Front brake caliper and front wheel removal
Fork removal
After all this, Boots can finally be plugged in.
The rest of the process is the reverse of the above procedure, but the work takes a considerable amount of time, so please allow plenty of time for this process.
The tool is also very cumbersome as it requires a Jack (MotorcycleLift) to move the Front up.
How was your experience with it?
Only the special parts fit perfectly.
I think Large sturdy without using Hose Band or Tie Wrap in Included Parts:.
[Included Parts:were they on?
In addition to the Body, the Hose Band, Tie Wrap, and Installation Instruction Manual are included.
[Was there anything that disappointed you?
Nothing in particular. Anyway, the installation is Large strange.
There is a Type from KIJIMA that can be installed without removing the Fork, but it is expensive and I don't like the cutout, so I will have to work on it.
Once installed, they do not need to be removed for a while, but we recommend that they be installed at the time of overhaul.
Incidentally, it was also possible to install HondaLogo's Stem Cover at the same time without any problem.
View detail
A little long to use for ESTRELLA.
[How is it used?
The 2002 ESTRELLA did not originally have Fork Boots, but when the front fork was overhauled, they were installed to prevent dirt and to give it a retro look.
Was the one you received as per Image?
The shape of the product was identical to the one in the picture on the Site.
Was the installation difficult?
I originally purchased the ESTRELLA after gathering information on the Net to see if it could be used with ESTRELLA, so the diameter of the Fork Boots was not a problem. I had removed the front fork so I could install the Fork Boots from the top without cutting the Fork Boots.
The diameter of the Fork Boots and Front fork was too Exactly to move, and it was Large strange to lower them to the proper position.
If you cannot detach the front fork, you will need to cut the Fork Boots yourself and install them by inserting them between the front fork and the front fork.
Also, since there are no holes in the Fork Boots to allow air to enter or exit, if the Fork Boots are installed as is and the Fork is stroked, there will not be enough air in the Fork Boots and the shape of the Bellows will collapse. Once the installation position is determined, we recommend making a hole in an inconspicuous place to allow air to flow in and out of the bellows.
How was your experience with it?
The Fork diameter was Exactly compared to ESTRELLA, but the length of the Fork Boots was a little long and the Bellows were a little close to the bottom.
Material-wise, it seems to be resistant to rain and wind, so I expect the rest to be durable.
[Included Parts:were they on?
In addition to the Fork Boots, a Tie Wrap was included to secure the upper and lower positions.
View detail
Better than NORMAL!
[How is it used?
Since the mainstream of scooter customization was plating in those days, we ended up with this inexpensive rear suspension, which is also in plating style.
Was the one you received as per Image?
Shiningly as per the Image, it is good to Parenthesis.
Was the installation difficult?
It can be easily done by replacing with NORMAL and working one by one.
However, since it was a little low-down, we had the driver ride on the side stand, and the two of us worked together to change it.
How was your experience with it?
It is better than NORMAL, but since it is Oil type, it will feel the same when it gets dented.
[Included Parts:were they on?
Other items included an Instruction Manual.
[Was there anything that disappointed you?
As I said, the ride quality is very different compared to Gas shock.
For those who are looking for driving performance, KYB's Gas shock, etc. would be a better choice.
I will recommend replacing them when the normal ones are worn out.
View detail
Fits: HARLEY-DAVIDSON FXST SOFTAIL STANDARD, HARLEY-DAVIDSON FXST SOFTAIL STANDARD
Is this a Universal Product?
I'm assuming it's probably a vehicle specific item.
If you don't write down the full length of Boots, there might be a lot of people who will buy it in vain.
On my Motorcycle, the diameter was right, but it was totally too long and I didn't even want to put it on.
View detail
Installed on a VOLTY.
Installed on a VOLTY.
Prevention of Fork Rust from Rain and Dust
Fork and inner blindfolds that have been rusted.
Dress-up of thin and poor Fork appearance
How about this for......etc.?
It looks very good.
View detail
Dust Seal Replacement
Fork Boots were worn out, so I replaced them with Dust Seals.
I'm glad I refreshed the look.
View detail
I bought it to make my ass drop.
After installing the DOREMI long tail, I did not like the slightly raised ass feeling, so I bought this.
It dropped 20 millimeters and straightened out.
I'm 5'9" and my footing was a little bit heeled, but now it's completely sticky on both feet.
It seems to be a good way to prevent standing goggles.
View detail
Fits: HARLEY-DAVIDSON FXDC DYNA SUPER GLIDE CUSTOM [Dyna Super Glide]., HARLEY-DAVIDSON FXD DYNA SUPER GLIDE, HARLEY-DAVIDSON FXDL-I DYNA LOW RIDER, HARLEY-DAVIDSON FXDX DYNA SUPER GLIDE
Dress-up!
I use them as Fork Boots for Dyna street Bob.
I wanted to somewhat reduce the number of Plating parts and Genus Gold Parts, so I chose this product which is easy to install.
I had to remove the Fork, but it was surprisingly easy to install.
It's more of a look than a performance.
It's a great way to make the car look more Classic.
View detail
Fits: SUZUKI KATANA, SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSX-S1000F
Installation Large change
You need some equipment for removal, Bolt nut is hard, and some equipment for installation, Torque wrench for tightening, and retightening after 100km driving (it loosens a lot). View detail
Fits: HONDA BENRY CD50, HONDA solo, HONDA Benly CD90, HONDA BENRY CD50, HONDA solo, HONDA Benly CD90
The fit is Large strange, but the cost effectiveness is Large threshold
The size was just right for YB-1.
Because it is not a split type, you have to remove the front fork to install it.
If you can put it on, it can be used semi-permanently, so I think it's worth the effort.
View detail
Fits: HONDA APE 100, HONDA XR100MOTARD, HONDA XR50 MOTARD, HONDA APE 50
It's a bit big
In terms of price, I personally think it’s a bit expensive, and I can’t find the same product. In the end, I can only choose it. The actual product is a bit bigger than I thought. I hope the effect will be better after installation. View detail