Reviews
Hmmm...
This is a replacement from OHLINS Grip, but the Fitting is poor.
It can be installed, but it does not feel right.
Is it expensive for the accuracy?
View detail
Fits: KAWASAKI ZZR1400, KAWASAKI ZZR1400, KAWASAKI ZZR1400, KAWASAKI ZZR1400, KAWASAKI ZRX1200 DAEG, KAWASAKI NINJA ZX-14R
The quality of the product is perfect. I appreciate that I can adjust it quickly without using any tools.
That was a good purchase
I appreciate the ability to quickly adjust without using tools.
No complaints about the texture.
View detail
K factory Link Plate
ReliableManufacturer and looks good Parenthesis! View detail
Fits: KAWASAKI Z250, KAWASAKI NINJA250SL, KAWASAKI Z250SL
Initial Adjuster functionality is also available
I use it on my Ninja 250SL that I ride for Circuit Racing.
It is a little difficult to tighten the screws while shrinking the springs during installation.
It is not a bad product with a good texture.
View detail
It can be exchanged in an instant.
I thought the OEM Blackish Grip was uncool.
I was wondering if we could exchange, from KFACTORY and Moto Corse.
I purchased KFACTORY's Grip when I learned that Grip was available.
I was worried about Moto Corse, but decided to go with this one.
I was worried because this SmallestParts cost almost 10,000 yen, but I am glad I bought it.
View detail
K-Factory billet details
This beautifully machined piece tops off the TTX Ohlins shock on my H2 very nicely . This sort of detail addition is what I look for when customizing my bikes . View detail
Maybe expensive for a Small thing. But I wanted it and I am satisfied.
It is a part that may or may not be changed, but it is a part that you can buy and use in its own way.
I'm happy with it
It would be better if it were a little cheaper. But I guess it can't be helped.
Replacement can be done in an instant with a hexagon.
View detail
expensive
It is convenient that the ride height can be adjusted steplessly
I would recommend it if you are dissatisfied with Lowdown Link from other companies.
But the price is Neck high.
View detail
K-Factory Clamp - Used on 1988 Suzuki GSX-R750J Slingshot
Very high quality fork clamp to install damper. This is a 43mm gold clamp made of aluminium, the anodise paint on the material is very good with fine workmanship. It has 2 holes to install at different locations. Eventhough it is stated for Kawasaki ZRX1200, i use it on my 1988 suzuki gsx-r750J slingshot. it looks beautiful along with the ohlins damper! View detail
Fits: KAWASAKI GPZ900R, KAWASAKI GPZ900R
Good looking.
The L-shaped bracket that came with the OHLINS Suspension was lost while I was taking it out for overhaul. It looked better than the OHLINS bracket and was easy to install. I use a Fender Eliminator, so I was able to install it without modification, but if you use OEM Fender, you may have to cut some parts off. If it were a little cheaper, it would be a perfect score. View detail
It is a good item
I think it's a very good product
Mounting Screw is not included.
Install with ex-Screw.
The appearance and texture will be considerably improved.
Recommended
View detail
Upgrading?
Not only does it look great, but the texture is also perfectly Upgrading?. View detail
KFACTORY Pre-load Grip
I saw a Z900RS on YouTube and I liked it so much that I bought it.:I changed from plastic grips to aluminum and now I feel like I'm wearing a high-end OHLINS. I like it, although the cost performance is not so good. There is also a silver one. View detail
40mm lowdown
To ride SEROW, 40mm lowdown because of my short height of 154cm.
Even beginner women can work on it.
The front also protrudes 20mm.
I was able to straddle the SEROW while standing normally, even though I used to straddle the SEROW while standing on the Side Stand.
It is good mentally to have both feet firmly on the ground. (40mm lowdownSeat by Rikizou is installed to match)
View detail
Fits: KAWASAKI Z250, KAWASAKI NINJA250SL, KAWASAKI Z250SL
Preload Adjuster.
The Gold part is just a Cap, but it is fancy and looks good! (Lol)
There is no problem with the product, but the fork cap on the Ninja 250SL is not screwed in, but is attached by CRing, which makes the removal and installation of the fork cap difficult.
It is much easier when two people can work together.
View detail
The finish is good and the quality is not bad
Thanks to the quick delivery, I received it without waiting too long. It is easy to install and looks pretty. It was so easy to install by myself that it took less than 5 minutes. It didn't seem like it would show up, but there is a sign that has changed quite a bit. It suits Ohlins very well. I will have to buy other products as well. -------------------------------------------------- -------- Thanks to the quickly delivered, I received it without waiting a lot. It took less than 5 minutes because it was easy to mount alone. It didn't seem to be marked, but there is a significant sign. It goes very well with Olins. We should also buy other products. Powered by Google Translator View detail
Satisfied
Material with NORMAL Grip in Black:I wondered how it would look with Plastic, but I changed to this and am satisfied with the Gorgeous look.
Installation is as simple as removing and replacing the Screw.
Perfect if the price is a little lower.
Gold is a good color for OHLINS Suspension.
View detail
The best looking Match
There is such a MATCH feeling that the OEM has this degree attached.
De Fault is BlackPlastic and looks quite nice.
View detail
well able to keep one's feet on the ground (e.g. when walking)
Lowdown kits are available from various manufacturers.
Close to Original (Plate is)
Casual Logo on Side Stand
Anyway, the footing has improved the best.
View detail
Fits: HONDA CB400SF Revo, HONDA CB400Super BOLDOR Revo
At One point.
[How is it used?
Town ride
Was the one you received as per Image?
usually
How was your experience with it?
Self-satisfied
[Points to note]
I'm afraid to lick it when I hang Torque on it.
How did it compare to other products?
Unknown as I have not used other products.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail