Reviews
Fits: HONDA APE TypeD, HONDA APE 100 TypeD
Satisfaction can be obtained in both appearance and performance.
Aluminum case and bright red Spring color increase the impact of the look and feel. (^^;)
Spring rate seems to be more flexible than OEM when you drive it, and
I felt that the Dumping was firmly in place and the Rear was more stable.
I personally appreciate the fact that the total length can be adjusted with the pre-road fixed, but the Hook wrench
It is not included, so those who wish to adjust it must purchase it separately.
View detail
Fits: HONDA APE TypeD, HONDA APE 100 TypeD
really good
At first, I tried to buy another company's product.
But I was attracted to this product so I bought it.
It has really good cushioning for dirt roads.
You can drive really comfortably on bumpy roads.
I don’t envy Ohlins.
However, if you encounter a bumpy place in a deep corner, the balance is lost.
-------------------------------------------------- -------- At first I tried to buy another company product. But I bought this product. There is a really good cushion on the dirt road. Really comfortable driving on a bumpy road. I don't envy Olins. However, if you meet a bumpy place in a deep corner, you will be able to get a balance. Powered by Google Translator
View detail
Fits: HONDA GORILLA, HONDA MONKEY
Super shock absorbers at a good price
Super shock absorbers at an affordable price I bought myself for my Honda Monkey. I chose between different manufacturers, but decided to leave my choice to minimoto, so my friend has already bought shock absorbers from this company and was satisfied. I bought myself not reinforced, but with an increased length relative to the original length of the shock absorbers. I am very pleased with the result - the landing has become more convenient, the suspension has become balanced and elastic in motion, it has become a pleasure to ride. I bought super shock absorbers at an affordable price for my Honda Monkey. I was choosing between different manufacturers, but decided to leave my choice on minimoto, since my friend had already bought shock absorbers from this company and was satisfied. I bought myself not reinforced ones, but with increased length relative to the original length of the shock absorbers. I am very pleased with the result - the seating position has become more comfortable, the suspension has become balanced and elastic, and driving has become a pleasure. View detail
Fits: HONDA GORILLA, HONDA MONKEY
MONKEYz50j Rear suspension replacement
I bought this rear suspension because the rear suspension of my MONKEYz50j for street driving was rusted. It is enough for city driving. I think it is a little bit soft, but it is better than rusty one. I am satisfied with the low price and good appearance. View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA
Reinforced Rear Shock MINIMOTO
Acquired for Honda Monkey. The original racks weakened, did not hold the load, in motion there was a palpable swing, again tired of the appearance. Also wanted to raise the back slightly due to the installed non-original low seat. The choice fell on reinforced racks of extended length (280mm) MINIMOTO. I liked the quality. Simple installation. The end result satisfied the expectation. I recommend it! View detail
It's changed!
It's stiffer and easier to run. View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA
My suspension is more solid, my composure is better!
It's a replacement from OEM on an OEM overrun car!
Spring is not working well, and Damper is too large to be effective.
The fluffy feeling didn't subside during and after Corner.
I replaced it with this one.
The suspension is installed with OEM Length.
Is it hard enough for one person to ride alone?
It doesn't bounce, but it strokes well.
Pushing, I guess you could say.
It was moderate when loaded with luggage or running with a small student child in the back.
If your OEM is getting tired, you should try replacing it!
It's cool to see the Spring and it looks like a motorcycle!
Plating is a little bit cheap.
Other than that, I'm satisfied (laughs)
View detail
Fits: HONDA GORILLA, HONDA MONKEY
I put it on my 6VGORILLA.
I put it on my 6VGORILLA.
It is good for easy dress-up.
From OEM, the wrench size becomes Large.
View detail
Fits: HONDA monkey, HONDA monkey
Not bad, rather good.
[How is it used?
I used to use a rear shock for Motocross, which was soft and not suitable for MOTARD, so I installed a new unopened one that was lying at home.
Was the installation difficult?
Easy work just to take and put on (unless you want to change the ride height etc.)
How was your experience with it?
First time I've used it and it's usually good sass.
If you're going to compromise the suspension on your NSR50, this is the way to go.
Even the late-model suspension must seem like Garbage.
[Included Parts:were they on?
Rather, this child is the Included Parts:of Swing Arm.
[Was there anything that disappointed you?
For this price and performance, I have no complaints.
If this doesn't work, just buy a more expensive suspension from the start.
View detail
Fits: HONDA GORILLA, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY
I was hoping for parts...
I used it to service my 30 year old GORILLA. I had very high hopes for it, but it was returned in tears due to initial defects (oil leaks, bad parts)! 。 I'm glad that the return was handled properly, but I was disappointed with the parts I was expecting:・・・・ View detail
Fits: HONDA GORILLA, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY
I like the black color.
I used them to service my 30 year old GORILLA, it's funny how they compare to a 30 year old Normal shock, but they are solid and look great. Easy to install and doesn't interfere anywhere! The Front is a NORMAL vehicle, but you could have chosen a longer Shock. (It's a little backward in NORMAL condition, so maybe you can raise the back a little? View detail
Fits: HONDA GORILLA, HONDA MONKEY
Installed on TOWN MATE 90
I replaced KITACOOKDShock that was originally installed because it got rusty and worn out.
It's a TOWN MATE 90, but you can pimp it out for MONKEY 280mm.
The thickness of the NORMAL is 17mm and the Large is 21mm, so it's a bit tight when you install the MONKEYShock.
The TOWN MATE 90 has a 12mm top hole, so you'll need to provide a collar.
If you buy a thicker Shock, you have to install it upside down or it will hit your body.
The Minimoto's Shock that I bought this time could be installed without turning it upside down just in time
View detail
Fits: HONDA APE TypeD, HONDA APE 100 TypeD
Cheap, but not bad
I installed it on my XR100MOTARD
Adaptation is APE, but since it is all-tuning type, it should be longer than NORMALMOTARDShock I made it so that it doesn't interfere with the LINK
I thought it was going to be firmer, but it turned out to be hip Well, I think it's a state of affairs that there was a dent in the NORMAL because the NORMAL hits the bottom immediately
Personally, I think the spring rate should be higher Also, I have the Vehicle Height Adjustment Wrench on hand If you don't have it, you'll need to purchase it separately
There may be individual differences, but I measured the height of the car with the Rightfootpeg, so please use it as a reference Take a look
View detail
Fits: HONDA GORILLA, HONDA MONKEY
Even the smallest of parts can be beautiful!
It's only a Nut, but when the Parts and paint parts are cleaned, the Bolt nuts will be clean too I'd like to turn on the This part of the Nut is a fine screw so you can't get it at Home center You'll have to go to Webike for this kind of stuff! View detail
Fits: HONDA CHALY 50, HONDA GORILLA, HONDA MONKEY, HONDA DAX
Cosmo!
Not too hard, not too soft compared to the NORMAL fluff!
I feel more comfortable riding with a little Speed
It was installed at the same time as the same manufacturer's STD ShapeSwing Arm5? I wonder if it will lower the Rear slightly
It's like Limit somehow in Normal stand
View detail
Rigid but good!
Compared to OKD's suspension, it is solid to Solidly. It is better to think as semiRigid suspension. Because I did not want to let Stroke as much as possible on the relationship between Fender and Tire to secure minimum ride comfort, purchase. I am satisfied.. View detail
Fits: HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA
Before breaking the waist
What made you decide the purchase?】 Looking for cheap and stubborn Arama
【How was it actually used?】 Compatibility has improved with Ronzui
【Was it difficult to install? (Hard parts case)】 Changing BushColor
【Please tell me the point of installation and hang (in the case of Hard parts)】 I infiltrated the WASHOS RASPENE so that Bush would not break, then put a Sarge that was larger than Color on the lower side and pushed out from above with Socket Socket and THandlebar from Color.
【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) ]
[Is there anything I was disappointed about?] Setting can not be called a bit more like All Screw
【Hope for Manufacturer - Please let me know if you have any improvement points]
【Have you compared items?】 YSS
[Others] It was a perfect commodity against the way of riding and the Balance of the vehicle
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA
I diverted things of other models but it was Large successful
I was considering various considering YAMAHARENAISSA 's Replace of OEMRear suspension.
Length and Bush diameter are the same, I tried also for Orthodox for SR 400, GBGB 250 CLUBMAN etc, but I wanted to do something unusual, because I did not like the hard Spring so I did not like MONKEY I also considered the Bush exchange of 330 mm for Ronsei.
For MONKEY I studied variously, MINIMOTO's suspension is the only HP Spec. It has been released, the Spring rate, full length, Stroke's confirmation was taken, so I decided to purchase.
For changing Bush diameter, DAYTONA DAYTONA : 70226 Rear shock Mounting Bush set and CHERRY Cherry : Buy SUS-CL 01-3 Collar for Universal Rear Suspension 14 mm together. Since Bush and Color are necessary above and below, each Quantity : I almost accidentally forgot to need two sets at a time.
<Appearance>
It is not compared with Aluminum Cut-out, but it is the same as OEM Level or higher. Small scratches as well as abroad parts are not enough.
Body diameter, ROD diameter is also same as OEM.
<Mounting>
When changing the Bush using vice and Socket, Bolt etc., the installation on the car body is completed in about 10 minutes by floating Rear with Jack. There was absolutely no problem.
<Traveling feeling>
The OEM Spring rate is 1. 2-2. 0kgf / Mm MultiRate (Estimated) Against MINIMOTO suspension 1. 65kgf / It is SingleRate of mm.
The impression that the fluffy feeling disappeared, the impression which picked up the fine unevenness of the road surface became hard, but the convergence of disturbance during Cornering improved. It is good feeling to turn while Axel is open and hanging Traction.
If Bump rubber is slightly softer or Stroke is a little longer, shocks when passing through bumps or steps may be reduced, but it is not enough to be a problem.
<Impressions>
It is 9000 yen in total with Bush and so on..
In this time I was looking for fearlessness to Black-Black, but I think that it is good to have individuality also with many color variations.
View detail
Fits: HONDA GORILLA, HONDA MONKEY
♪ ♪ ♪
Pure STD Nut was rusted so I bought it ♪
I am gradually making each Parts a brand new, so I think that I will take care of Wa Big in future ♪
View detail
The best foot ~
I decided to consider buying as it looks and priced, but it arrives Big Ri I do not think I am smiling unintentionally.
The correspondence was quickly arrived and it was the best shopping.
I will also use it.
View detail