Reviews
Fits: HONDA GORILLA, HONDA MONKEY
Super shock absorbers at a good price
Super shock absorbers at an affordable price I bought myself for my Honda Monkey. I chose between different manufacturers, but decided to leave my choice to minimoto, so my friend has already bought shock absorbers from this company and was satisfied. I bought myself not reinforced, but with an increased length relative to the original length of the shock absorbers. I am very pleased with the result - the landing has become more convenient, the suspension has become balanced and elastic in motion, it has become a pleasure to ride. I bought super shock absorbers at an affordable price for my Honda Monkey. I was choosing between different manufacturers, but decided to leave my choice on minimoto, since my friend had already bought shock absorbers from this company and was satisfied. I bought myself not reinforced ones, but with increased length relative to the original length of the shock absorbers. I am very pleased with the result - the seating position has become more comfortable, the suspension has become balanced and elastic, and driving has become a pleasure. View detail
Fits: HONDA GORILLA, HONDA MONKEY
MONKEYz50j Rear suspension replacement
I bought this rear suspension because the rear suspension of my MONKEYz50j for street driving was rusted. It is enough for city driving. I think it is a little bit soft, but it is better than rusty one. I am satisfied with the low price and good appearance. View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA
Reinforced Rear Shock MINIMOTO
Acquired for Honda Monkey. The original racks weakened, did not hold the load, in motion there was a palpable swing, again tired of the appearance. Also wanted to raise the back slightly due to the installed non-original low seat. The choice fell on reinforced racks of extended length (280mm) MINIMOTO. I liked the quality. Simple installation. The end result satisfied the expectation. I recommend it! View detail
Great Looking and Affordable Rear Shocks for the Monkey 125
About quality and texture: I am happy with the quality of this set of rear shock absorbers. Lots of chrome plated steel on these, from the shock body to the springs and then the pre-load adjusters are made from cast aluminium. About the feeling of use: To me they look much better then the Honda rear shocks and there is no doubt they perform better and this is mainly because they have heavier rated springs. Products to buy together: Some type of upgrade to the front forks would also be desirable to purchase along side these rear shock absorbers. I didn't want to go to the trouble of completely disassembling the front forks for heavier rated springs, so I just changed the fork oil to a 20w for now and it is an improvement. Difficulty of installation: The process to install takes about three quarters of an hour, 2 acorn nuts per shock and multiple wahers are all that is involved. Not difficult to do. Cost performance and comparison with other products: Good costing as you are getting a suitably sprung set of rear shock absorbers that look great on the Monkey 125 in chrome and they are affordable for your average rider as compared to most of the other options here on Webike which are much more expensive. About shipping and packaging: The faster and more expensive shipping are the only option for suspension. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: If you weight less than 70kg then I think you will find the spring rate of these rear shock absorbers too high and you should checkout the ones available from Takegawa, which are also available in chrome. View detail
MINIMOTO Rear Shock Absorbers for Honda Monkey 125
About quality and texture - Top quality for the low price they are going for here on Webike. Chrome plating on the shock body and spring is holding up well after some use. About the feeling of use - For a basic rear shock they are performing great on my short daily commute. They have preload adjustment but due to the heavier springs over the OEM ones I have not required to make any adjustment. Products to buy together - MiniMoto make some Monkey 125 specific parts and I'd like to add their Honda 3D fork emblem kit to give my Monkey a bit more retro styling. Difficulty of installation - Installation of the rear shocks is very simple on this motorcycle. Can be performed by just one person with a spanner. Cost performance and comparison with other products - These are cheap dollar wise when comparing to what is available here on Webike but you will be surpised of the quality you get for such little money. About shipping and packaging - I think Webike are doing their best with shipping pricing, so I'm happy. Packages ship within 24 hours and arrive very quickly from Japan. Any concerns, cautions, or advice when purchasing - It is a shame Mini Moto only offer these shocks in chrome and black, so if you are wanting another colour shock to match your Monkey you will be wanting to take a look at the ones availble from Kitaco. View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA
My suspension is more solid, my composure is better!
It's a replacement from OEM on an OEM overrun car!
Spring is not working well, and Damper is too large to be effective.
The fluffy feeling didn't subside during and after Corner.
I replaced it with this one.
The suspension is installed with OEM Length.
Is it hard enough for one person to ride alone?
It doesn't bounce, but it strokes well.
Pushing, I guess you could say.
It was moderate when loaded with luggage or running with a small student child in the back.
If your OEM is getting tired, you should try replacing it!
It's cool to see the Spring and it looks like a motorcycle!
Plating is a little bit cheap.
Other than that, I'm satisfied (laughs)
View detail
Rear Shock Absorber
About quality and texture - Great quality, I really like the chrome but the welds around the base of the eyelets could be a little better. About the feeling of use - They handle my 80kg way better then the Honda OEM ones did, a much firmer ride which I like. Products to buy together - I paired these together with some stiffer fork springs from Kitaco to complete my suspension transformation. Difficulty of installation - Easy to install, I just changed one at a time so no stand was required. Cost performance and comparison with other products - You will not find much cheaper costing rear shocks then these but they are a very basic replacement compared to what is available at a much higher cost. About shipping and packaging - Only option to Australia was express, so I had them in my hands within a week but was expensive. Any concerns, cautions, or advice when purchasing - Add a little grease to the mounting points when installing these to keep the pivot operation smooth. View detail
Old school looking shocks for the Monkey 125
I needed to get a photo attached to this listing on Webike so you can see how good these chrome old school looking shocks look on the Monkey 125. For me they really fit the original styling of this motorcycle, I know there a better performing rear shocks out there but I did not want to have anything too modern looking.The diameter of the springs are larger then the OEM Honda ones and give the rear of the motorcycle a more solid look now. Mini Moto stickers are included fitted to the inner section of the shock and you can choose to mount the shocks to display this or not. The pricing of these rear shocks id very good but shipping costs to Australia is high. View detail
Stable Corner ring
Normal suspension is soft and bouncy, so I replaced it with Minimoto shock absorber and the rear tire bites better and I don't mind a little bump. View detail
MiniMoto Chrome Rear Shock Upgrade for Monkey 125
The Honda Monkey 125 OEM rear shock absorbers are under sprung for most people so are an upgrade that is most likely required. I compared many shock absorbers available for the Honda Monkey 125 and for my budget and styling for my Monkey the MiniMoto chrome ones was what I decided to go with. Once received and inspected I give them a 4 out of 5 for quality. The installation is very easy. They come with a collar to adjust the pre-load on the spring but at my weight of 74 kg the lowest setting with no additional pre-load was used. Since riding with these fitted the rear of the bike it a lot firmer and to be quite honest maybe a bit firmer then I wanted. View detail
MONKEY125 Foot Strengthening
The Monkee 125 OEM rear suspension does not have a solid feel to it, so I am thinking about replacing it, there are many manufacturers that sell rear suspensions, but the Minimoto Reinforcement Type All Chrome Plating was on sale at Uebig, so I purchased it immediately. In the evening, I started to install it, and I was able to install it without any problem, because the spring preparation was the softest (Quantity).:(2pc) I drove it around the house as it is, when I straddle it, there is no sinking, the ride is different, the manufacturer says that it runs like licking the unevenness of the Asphalt road surface in the product features, I feel like that, after running it from now on, I will prepare Spring and run fee. I am looking forward to try the Ring. View detail
Fits: HONDA monkey, HONDA monkey
Not bad, rather good.
[How is it used?
I used to use a rear shock for Motocross, which was soft and not suitable for MOTARD, so I installed a new unopened one that was lying at home.
Was the installation difficult?
Easy work just to take and put on (unless you want to change the ride height etc.)
How was your experience with it?
First time I've used it and it's usually good sass.
If you're going to compromise the suspension on your NSR50, this is the way to go.
Even the late-model suspension must seem like Garbage.
[Included Parts:were they on?
Rather, this child is the Included Parts:of Swing Arm.
[Was there anything that disappointed you?
For this price and performance, I have no complaints.
If this doesn't work, just buy a more expensive suspension from the start.
View detail
Fits: HONDA GORILLA, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY
I was hoping for parts...
I used it to service my 30 year old GORILLA. I had very high hopes for it, but it was returned in tears due to initial defects (oil leaks, bad parts)! 。 I'm glad that the return was handled properly, but I was disappointed with the parts I was expecting:・・・・ View detail
Fits: HONDA GORILLA, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY
I like the black color.
I used them to service my 30 year old GORILLA, it's funny how they compare to a 30 year old Normal shock, but they are solid and look great. Easy to install and doesn't interfere anywhere! The Front is a NORMAL vehicle, but you could have chosen a longer Shock. (It's a little backward in NORMAL condition, so maybe you can raise the back a little? View detail
Fits: HONDA GORILLA, HONDA MONKEY
Installed on TOWN MATE 90
I replaced KITACOOKDShock that was originally installed because it got rusty and worn out.
It's a TOWN MATE 90, but you can pimp it out for MONKEY 280mm.
The thickness of the NORMAL is 17mm and the Large is 21mm, so it's a bit tight when you install the MONKEYShock.
The TOWN MATE 90 has a 12mm top hole, so you'll need to provide a collar.
If you buy a thicker Shock, you have to install it upside down or it will hit your body.
The Minimoto's Shock that I bought this time could be installed without turning it upside down just in time
View detail
Fits: HONDA CHALY 50, HONDA GORILLA, HONDA MONKEY, HONDA DAX
Cosmo!
Not too hard, not too soft compared to the NORMAL fluff!
I feel more comfortable riding with a little Speed
It was installed at the same time as the same manufacturer's STD ShapeSwing Arm5? I wonder if it will lower the Rear slightly
It's like Limit somehow in Normal stand
View detail
Rigid but good!
Compared to OKD's suspension, it is solid to Solidly. It is better to think as semiRigid suspension. Because I did not want to let Stroke as much as possible on the relationship between Fender and Tire to secure minimum ride comfort, purchase. I am satisfied.. View detail
Fits: HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA
Before breaking the waist
What made you decide the purchase?】 Looking for cheap and stubborn Arama
【How was it actually used?】 Compatibility has improved with Ronzui
【Was it difficult to install? (Hard parts case)】 Changing BushColor
【Please tell me the point of installation and hang (in the case of Hard parts)】 I infiltrated the WASHOS RASPENE so that Bush would not break, then put a Sarge that was larger than Color on the lower side and pushed out from above with Socket Socket and THandlebar from Color.
【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) ]
[Is there anything I was disappointed about?] Setting can not be called a bit more like All Screw
【Hope for Manufacturer - Please let me know if you have any improvement points]
【Have you compared items?】 YSS
[Others] It was a perfect commodity against the way of riding and the Balance of the vehicle
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA
I diverted things of other models but it was Large successful
I was considering various considering YAMAHARENAISSA 's Replace of OEMRear suspension.
Length and Bush diameter are the same, I tried also for Orthodox for SR 400, GBGB 250 CLUBMAN etc, but I wanted to do something unusual, because I did not like the hard Spring so I did not like MONKEY I also considered the Bush exchange of 330 mm for Ronsei.
For MONKEY I studied variously, MINIMOTO's suspension is the only HP Spec. It has been released, the Spring rate, full length, Stroke's confirmation was taken, so I decided to purchase.
For changing Bush diameter, DAYTONA DAYTONA : 70226 Rear shock Mounting Bush set and CHERRY Cherry : Buy SUS-CL 01-3 Collar for Universal Rear Suspension 14 mm together. Since Bush and Color are necessary above and below, each Quantity : I almost accidentally forgot to need two sets at a time.
<Appearance>
It is not compared with Aluminum Cut-out, but it is the same as OEM Level or higher. Small scratches as well as abroad parts are not enough.
Body diameter, ROD diameter is also same as OEM.
<Mounting>
When changing the Bush using vice and Socket, Bolt etc., the installation on the car body is completed in about 10 minutes by floating Rear with Jack. There was absolutely no problem.
<Traveling feeling>
The OEM Spring rate is 1. 2-2. 0kgf / Mm MultiRate (Estimated) Against MINIMOTO suspension 1. 65kgf / It is SingleRate of mm.
The impression that the fluffy feeling disappeared, the impression which picked up the fine unevenness of the road surface became hard, but the convergence of disturbance during Cornering improved. It is good feeling to turn while Axel is open and hanging Traction.
If Bump rubber is slightly softer or Stroke is a little longer, shocks when passing through bumps or steps may be reduced, but it is not enough to be a problem.
<Impressions>
It is 9000 yen in total with Bush and so on..
In this time I was looking for fearlessness to Black-Black, but I think that it is good to have individuality also with many color variations.
View detail
The best foot ~
I decided to consider buying as it looks and priced, but it arrives Big Ri I do not think I am smiling unintentionally.
The correspondence was quickly arrived and it was the best shopping.
I will also use it.
View detail