Reviews
Pedal cover installed
I wish it was black to match the XL1200C SPORTSTER 1200, but I painted it myself and installed it. View detail
Easier to step on.
Brake pedal was short and difficult to step on. View detail
just the right thickness
The OEMChange rubber had been worn and worn out since the vehicle was purchased used, so I decided to go with this thicker, better-looking rubber.
The replacement was done by cutting a slit in the original rubber so that it would not hit the shift lever, tearing it open, removing it, and then inserting a small amount of silicon spray into the inner diameter of this rubber. The length was not cut, and the size was Exactly.
I was satisfied with the new design, which is a little thicker than the original OEMRubber and easier to shift.
View detail
It was as expected.
I thought it would be OK to buy Chinese products from Amazon, but I decided to go with JapanManufacturer because it is more reliable.
The amount of Back and Up is set in a Large tight location, but the Position is now a good fit.
I think SF should be this much Position in OEM.
View detail
Fits: HONDA Grom 125, HONDA Grom 125, HONDA Grom 125, HONDA MONKEY125, HONDA MONKEY125, HONDA DAX125
I thought it was dress-up parts...
Since I replaced KIJIMA's SeesawChange pedal, I also integrated the brake pedal from KITACO's BigFoot to KIJIMA's foot type. The bolt is hexagonal and the quantity is 1,000.:Fixed with 2pc.
It is a dress-up part, but it is surprisingly practical.
View detail
Not only does it look better, but it is easier to Shift change.
I wanted to replace the OEM Shift Pedal as soon as possible because the black paint was peeling off soon after delivery, and when KIJIMA released it, I was the first to order it.
I thought I would simply loosen the bolt securing the pedal and pull it off, but it interferes with the footpeg and does not come off, so I had to remove the bolt securing the footpeg bracket and loosen the pivot shaft to get the clearance.
I am satisfied with the quality and the price, but the foot pedal is separate from the change arm body and is screwed on from the back. The length and shape of the pedal is not visually different from the OEM pedal, but the unevenness of the foot pedal allows me to step on the pedal from the top when shifting.
It is not difficult to do as a DIY project, but please note that some parts, such as the pivot shaft, require torque management.
View detail
Cospa high
In Corner, I had a natural, aggressive attitude. View detail
Fits: HONDA JAZZ, HONDA CROSSCUB110, HONDA SUPER CUB110, HONDA CUB, HONDA MONKEY
Operability Up??
Installation requires a bit of hang, but it is securely installed.
There is no wobble.
It will look more luxurious and be easier to operate.
It is a good cosmetic parts.
View detail
Fits: YAMAHA YZF-R25, YAMAHA MT-25, YAMAHA MT-03 (2015-), YAMAHA YZF-R3, YAMAHA MT03, YAMAHA YZF-R3, YAMAHA MT03, YAMAHA YZF-R3
I installed it on a 2023 R25 ….
The Shift side is fine, but the Brake Side is a problem.
As you say, it is impossible with the included Plate.
I really wanted to set it at 50mm up and 50mm back, but the brake hose interfered with it and it was too tight, so I set it at 45mm up and 40mm back.
The plate was substituted with a KITACO Universal Bracket that was left over in Garage and a nice color that happened to be available.
After installation, the knee grips feel better and easier to use.
View detail
Stand out! Good durability!
I used it for SUPER CUB's Change Pedal. It is durable and does not wear off easily even after heavy use! The price is reasonable and you don't need any tools to replace it, so I recommend replacing the OEM change rubber if you change your mind or if the OEM change rubber has deteriorated! View detail
Fits: YAMAHA YZF-R25, YAMAHA MT-25, YAMAHA MT-03 (2015-), YAMAHA YZF-R3, YAMAHA MT03, YAMAHA YZF-R3, YAMAHA MT03, YAMAHA YZF-R3
It was great.
You can feel like a Racer just by installing the Plate. View detail
Fits: HONDA Ape 100, HONDA Ape 50, HONDA Ape 100, HONDA Ape 50
It's cute, cool, and practical!
It was difficult to step on the rear brake, so I installed it as a trial, and it became easier to step on than I had imagined, with great effect.
It looks cute and cool Custom feeling, and I'm Large satisfied with it, even though I installed it as a trial...................
If the price were a little lower, there would be nothing to say, but after seeing the product's construction, it was a good one at a reasonable price!
View detail
Fits: HONDA JAZZ, HONDA CROSSCUB110, HONDA SUPER CUB110, HONDA CUB, HONDA MONKEY
good pedal
I was looking for a pedal that felt pure. I wanted a pedal that would go well with the curve without splashing. The Kijima product was very good because it had a good finish and prevented slipping. It's not a curve-only product, so you need to process the bracket a little, but it matches well. I'd like to buy and install two additional gears. Thank you. View detail
Fits: HONDA Ape Type D, HONDA little cub, HONDA Ape 100, HONDA CUB [CUB] Super Cub (Custom 12V), HONDA CUB [CUB] Super Cub (DX 12V), HONDA CUB [CUB] Super Cub (Standard 12V), HONDA CUB [CUB] Super Cub (Business 12V), HONDA Ape 50, HONDA Ape 100 Type D, HONDA Ape Type D, HONDA little cub, HONDA Ape 100, HONDA CUB [CUB] Super Cub (Custom 12V), HONDA CUB [CUB] Super Cub (DX 12V), HONDA CUB [CUB] Super Cub (Standard 12V), HONDA CUB [CUB] Super Cub (Business 12V), HONDA Ape 50, HONDA Ape 100 Type D
Available in a choice of colors and a little cheaper than OEM.
[How is it used?
We took over a LITTLE CUB that had been neglected for a long time, and replaced the parts in the process of maintenance and restoration.
The old CUB series I have inherited in the past have either footpeg pushing up at an angle due to Large body tipping, and the footpeg rubber is sticking through. This symptom is noticeable because many of these vehicles were owned by elderly people to check the water supply in the rice paddies or to run errands in the neighborhood.
The exterior of this vehicle has a lot of rust, and the frame and exterior were painted accordingly, so I wanted to use brown Footpeg Rubber for the color scheme, so I chose KIJIMA products.
Was the one you received as per Image?
It's not thick or thin, it's just right. Brown. The color was just like the Image.
Was the installation difficult?
Before the parts cleaner is evaporated, insert it into the base of the footpeg and push it in by hitting it with a rubber hammer to complete the installation easily.
It may be easier to work in the summer than in the winter when the temperature drops and rubber becomes harder.
How was your experience with it?
The product has the same shape as the OEM, and the treads are Large size to absorb various vibrations adequately.
If you are not dissatisfied with OEM Footpeg Rubber, this is a good product that will not dissatisfy you as well.
[Included Parts:were they on?
Footpeg RubberQuantity:Pair (for Left and Right) 1Quantity:Set and one Instruction Manual are included.
[Was there anything that disappointed you?
If you don't like OEM Shape, you probably won't buy this product in the first place, so I have no complaints at all.
Other items that would be helpful
Point and hang of installation
One method is to install it as described above, so if you know of another method, we recommend that you implement that method.
It may be more troublesome to remove the old footpeg that is now attached than to install it.
[Availability and clarity of the Instruction Manual
A simple Instruction Manual is enclosed, and the product is easy to understand as it only requires the old Footpeg Rubber to be removed and then installed in the reverse order.
[Notes]
Depending on the method, some of the work may be done by force, so please be careful to avoid injury.
[ITEMS TO BUY TOGETHER
If the footpeg, handlebar grip, and kick pedal rubber are all the same color, it will give a sense of unity, parenthesis, and cuteness, so please enjoy your own personal sense of style, including using different colors for everything.
[Opinions and requests to Manufacturer
Please continue to sell the current Color line nap for many years to come.
View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
lovely
Installed on a GEMMA 125 FootBrake.
The OEM is black and small, so I installed the Blue one, which is easier to understand and a little larger, so it is easier to step on.
I wondered if it would be anodized bald. I was afraid it would bald, but it hasn't peeled off yet.
View detail
For discontinued Rear Sets
I have been using it on my Rear Sets Shift and Brake pedal, which are no longer available. View detail
Fits: HONDA JAZZ, HONDA CROSSCUB110, HONDA SUPER CUB110, HONDA CUB, HONDA MONKEY
Good looks, good effect
I was curious about it and bought it! The moment I put it on, I was surprised that my shoes didn't slip when I stepped on the Brake and it felt like it worked better. It looks good and cool. View detail
Fits: YAMAHA BOLT, YAMAHA BOLT R, YAMAHA BOLT, YAMAHA BOLT R
Since footpeg goes up, you should also adjust the Pedal.
The Normal step rubs easily at the turns of intersections, so I put it on because it is a popular Part on social networking sites! 。 The instruction manual states that the normal step cannot be installed and that the footpeg is for HARLEY. I think it is probably a repress product of Harley products, and there is no description on SNS that the pedal is adjusted on the Large size. It is definitely better to adjust it. If you can't do it, leave it to PRO. Also, if you use Corner, such as mountain pass, it will rub even with this. View detail
Fits: HONDA JAZZ, HONDA CROSSCUB110, HONDA SUPER CUB110, HONDA CUB, HONDA MONKEY
The sense of customization is very strong.
Was the one you received as per Image?
It was generally as in the Image, but the invisible reverse side is a little bit not so good looking. (Lol)
Was the installation difficult?
The Instruction Manual is easy to understand and can be installed in 10 minutes.
How was your experience with it?
It simply gives a sense of customization.
Practicality also increases the area that can be stepped on, making it more sloppy-footed.
[Was there anything that disappointed you?
The installation method is delicate.
I wonder why it seems so complicated, but I would like to believe that it must be the intent of the Manufacturer.
Other items that would be helpful
Points to note
The durability of the mounting screws is somewhat difficult, so care must be taken when tightening them.
View detail
Fits: HONDA CT125 HUNTER CUB, HONDA CT125 CT110 HUNTER CUB
Increased peace of mind at Brake
When applying FootBrake, the ground contact area of the toes is increased for a sense of security. View detail