Reviews
Fits: HONDA CB400SB, HONDA CB400SF, HONDA CB400SF, HONDA CB400SB
Well thought out design
The position of the pedal is set at a reasonable amount of up for CB with low seat height, and it is recommended for multi usage. The Tandem Footpeg is detachable and Silencer Bracket is included, so it can be used as a single rider spec. The price is reasonable.
It is a little unsatisfactory that there is no heel guard and the parts for the Tandem Footpeg create a step and hit the Boots. (Guard made by myself) Shift Hedal may interfere with Link Rod. We are trying to find a way to remove the rattling of the pedal that causes this problem.
View detail
Repeat ?
Change from Gold to Red.
Rubbers have been replaced due to deterioration!
View detail
Fits: HONDA CB1300 SF SP, HONDA CB1300 SB SP, HONDA CB1300 SB, HONDA CB1300 SF
nice step up pedals
This product is impeccable in terms of workmanship and design, very comfortable. The only regret is that the original brake hose needs to be replaced, but there is no STRIKER hose on the webike, so I can only buy the brake hose separately. Overall, this is a good shopping experience. I hope webike has more and better products ------------------------------------------ ---------------- This product is impeccable and comfortable in terms of workmanship. The only regret is to replace the original brake oil pipe, but there is no Striker oil pipe on Webike, so I can only buy another brake oil pipeline. Webike has more and better products Powered by Google Translator View detail
I like the texture.
I've used it and it's great, no slipping of the feet. View detail
It is a little difficult to install.
I had a little trouble with the position of the brake switch spring bracket, but I realized during the work that it should be in the same position as the position of the footpeg, and then I was able to work smoothly.
It would have been nice if the instruction manual had mentioned this.
We had installed Striker's Rear Sets on our previous motorcycle and knew how well they worked.
Boots are much less slippery and I am very satisfied.
The bracket for the Exhaust System installation (external Exhaust System) did not have the correct hole position and had to be shaved by hand.
View detail
Fits: KAWASAKI KSR110, KAWASAKI KSR110
Grip good?
I have replaced many motorcycles, but only Pedal has always used Striker's Repair Parts!
Reliable and trustworthy product.
View detail
Fits: SUZUKI Hayabusa (GSX1300R Hayabusa)
The feel is better, but ….
I made a customization to HAYABUSA's Normal step because it had a rubber on it and the feel was not good.
Since I was not dissatisfied with the position of the feet, I chose this one, which is a rather slippery position as well as NORMAL.
It's neat because it looks Black.
However, I am having difficulty getting into N. I'm not sure if it's my fault….
View detail
20mmBack, 10mmUp.
[How is it used?
Street Riding and Touring
Was the one you received as per Image?
Street Image
Was the installation difficult?
There are three height adjustments for the shift pedal, and I had a hard time positioning them, but other than that, there were no problems.
How was your experience with it?
No problem with Fee Rings as in NORMAL.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
nothing special
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
I like the one-off style.
Motivation
The Rear pad was depleting unusually fast, and the cause was the way the footpeg was placed on it.
It would be fine if he was riding on his toes, but he was always dragging the Rear pad because he was Habit riding near the RearBrake pedal.
Therefore, we chose this product, which is in a shape that does not interfere with the footpeg in its usual state, with the area between the footpeg and the brake pedal tread shaved off (no interference).
Was the one you received as per Image?
The original Brake pedal is not made by Striker, but I bought it because I thought it was a Universal Product.
The shape was as shown in the Image.
Was the installation difficult?
Since it was not at a level where I could do the processing at my personal level, I removed the footpeg area and asked my favorite shop to do the processing for me. (Bolt holes were converted from 8mm to 10mm, and parts other than the pedal were removed and installed.)
When the returned parts were installed on the vehicle, it was necessary to change the length of the bolt and adjust the rear brake switch accordingly.
How was your experience with it?
It looks just like the Image.
Rear SetsQuantity:Pair (for Left and Right) I thought about installing a new pedal (or a new pedal) with some modifications. I don't know if it would be cost-effective including the processing fee, but I liked the original style, so I think it would be OK to replace only the pedal. It would be better if I use Habit for toe riding, but I use the rear brake a lot in town for commuting, etc., so I think it is less likely to interfere there.
[Others]
I am glad that I was able to purchase these Repair Parts from Striker at Single ItemParts because of their shape and precision.
View detail
The texture is good!
The installation was easy, even for an amateur. I have run about 100 km after fine-tuning the handlebar angle, but I will do a test run after readjusting the handlebar angle and if it still doesn't feel right, I will consider replacing the handlebar.
It's like
But the texture and feel are very good, so I'm glad I bought it.
View detail
Good Grip feel.
The mother footpeg is Baby Face, but I use Striker because it is compatible with footpeg. I like the feel of the controls and how it feels when I step on it. View detail
STRIKER Striker Special Footpeg Kit
[How is it used?
We purchased the product in January 2020 and have been using it ever since.
Was the one you received as per Image?
Since the Frame is Black, we matched the color.
Was the installation difficult?
Anyone who can read the Instruction Manual can do it.
How was your experience with it?
Duralumin is used, so it will not become if you step on it too hard.
[Included Parts:were they on?
It comes with parts to reverse shift and a shift rod that can be used with the Honda OEM Quick shifter.
[Was there anything that disappointed you?
I knew this before I purchased the product, but the Shift rod is crossing the Frame, making it harder to STAND.
Other items that would be helpful
A short Shift rod, 120-130mm long, allows for OEM-style mounting while still using the Striker footpeg.
View detail
Fits: SUZUKI Hayabusa (GSX1300R Hayabusa)
Recommended for touring as the position is loose.
This was my first time installing Rear Sets and it took quite a bit of time, but I managed to get it installed.
The Instruction Manual is simplified, so we used Net videos and other resources for installation.
It is a looser Position than other Manufactures, so it seems to have no problem with Touring.
View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
If you are a Cafe rider, Rear Sets is the way to go!
I chose silver because I thought the color would peel off if I used black for a long time.
The texture of the actual product is Large change better than the sales photo, and the color is good.
30mmBACK/30mmUP is the largest adjustment, so I set it to the largest.
Combined with the Cafe's forward leaning posture, the position became very good, increasing the sense of combat stance.
If you are a Cafe rider, I highly recommend installing Rear Sets.
Also, in NORMAL, the footpeg hits the calf when the foot is lowered, but this is reduced and comfortable in LARGE.
I am satisfied with the Large change because it is easier to operate, and the hold feeling with the heel plate is better than with the Normal plate.
I installed it myself but had a hard time.
However, I was able to start working on the project after preliminary study with YouTube videos uploaded by our predecessors, which helped Large change.
View detail
![Striker Step Kit [Striker Step Kit] Type2](https://img.webike-cdn.net/catalogue/10607/ss-aa262b_TS.jpg)
Fits: YAMAHA FZ1, YAMAHA FZ1FAZER
It looks Parenthesis better.
During installation, the Brake master was stuck and the Pedal would not return, so I put two pieces of Washer between one Bolt and the MASTER.
Right SideStep base only 1 pc Bolt on the underside of the base
It was 5mm long, so I changed it to a shorter one and put it on.
View detail
Fits: YAMAHA MT-10, YAMAHA MT-10SP, YAMAHA MT-10, YAMAHA MT-10SP
A little more adjustment range would be nice.
When using in Mini circuit, the Toe Slider of Boots definitely rubs (and quickly disappears) even when I adjust the Pre-road of Suspension to Max and try to put the base of my toes on 7Footpeg. It may be a problem with the way I ride, but I would have been happy if there was more adjustment range upward (and backward, for that matter), even if it was 10?
*Motorcycle has a NORMAL Exhaust System and suspension, but there is no rubbing area....
I think the quality, rigidity, operation, etc. are worth the price.
Also, it may be obvious, but please note that the Tandem Footpeg must be removed or it will be caught by Boots.
I wrote a lot about it, but I like it for what it is.
View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R3
Striker Rear Sets
There are no detailed instructions for installation, so you may have a little trouble if you are not familiar with it.
I was able to install it without any modification, but it depends on the position of the footpeg.
If the tank of brake fluid in the Rear is not relocated by Bracket or other means, the Hose will break.
I thought such Bracket and explanation would be helpful.
I think the quality is appropriate for the price, but I would be happy if it were a little cheaper.
View detail
Rear Sets for YZF-R1 by Exactly
I like the design and position. It would be even better if I could select "Racing step bar" when purchasing. View detail
Striker Heel Guard
I purchased this product to change the design of Heel Guard.
Is this the old Design?
The current design is similar to the OEM design with several round holes.
I didn't like that very much so I switched to the older Heel Guard. I am very happy with it.
View detail
It's on BABYFACE's Rear Sets!
[How is it used?
Used for HORNET900 BABYFACE Rear Sets.
https://www.webike.net/sd/1915708/
Was the installation difficult?
Bolt On！
How was your experience with it?
I am glad to see that BABYFACE's Rear Sets have been Exactly followed.
View detail