Reviews
Fits: HONDA CUB, HONDA CUB, HONDA CUB, HONDA CUB
Required for Engine conversion
I purchased the Crankcase because I needed it after the engine was converted to a Large type.
I would have preferred a foldablefootpeg if I could have, but I had no choice.
Brake pedal is also a Quantity:Set, and is required in the Quantity:Set sales are Reasonable and appreciated.
Perhaps Pedal plating is more prone to rust than domestic plating, so maintenance will be more frequent.
View detail
Fits: HONDA MONKEY125, HONDA Monkey 125
I bought it wrong Cannot install on jb03
Quality and texture information is excellent for the price Model jb03 does not need to be installed for usability Purchase and install a 516-1432900 kitaco shift link on model jb02 It's not easy to install Cost performance and low price and low quality compared to other products WeBike packaging is always good. Shipping and packaging will arrive in a week Purchase concerns, precautions, and advice jb03 do not fit.Unable to install after ordering due to incorrect year inquiry... But I recommend it because the price is half the price compared to other brands View detail
Very comfortable!
[How is it used?
I installed it on my D Tracker 125.
Was the installation difficult?
It was installed with Bolt On.
Universal Product, but it did not interfere anywhere.
How was your experience with it?
It's so much more comfortable.
It is more comfortable than I expected to be able to SHIFT UP just by stepping on it.
It's also really nice that it doesn't damage the back of the shoe.
View detail
Fits: HONDA CUB, HONDA CUB, HONDA CUB, HONDA CUB
footpeg
Used when installing specula
Brake pedal shaft is too inaccurate.
View detail
Fits: HONDA Dax 70, HONDA dachshund, HONDA Shirley 70
This is a must for CHALY.
This is a must have if you are going to Tandem on a CHALY. It is easy to install and although it is not OEM, it is very similar and seems to be durable. Reasonable price. View detail
Fits: HONDA Dax 70, HONDA dachshund, HONDA Shirley 70
Purchased due to loss.
OEMfootpeg has been gone for sometime and I bought it. It seems like they just have Chinese parts too? I've heard that it was pretty much one of the last ones …
It is new, but it does not look bad on a ragged vehicle.
In case you are wondering, I bought a new Tandem Footpeg because it is supposed to be able to carry two people, but I haven't actually used it, so I don't know how it feels to use it.
View detail
Fits: HONDA CT125CT110 HUNTER CUB, HONDA CT125CT110 HUNTER CUB
Effects unknown
[How is it used?
Street Riding and Touring
Was the one you received as per Image?
I thought it would be better than some Chinese-made one, but after processing, the BALI...
Was the installation difficult?
Installation itself is easy, but Torque control is necessary since it is tightened together with the Crankcase section?
How was your experience with it?
Since I was not originally dissatisfied with Shift change, I could not feel the effect.
[Included Parts:were they on?
Color, Installation Screw
[Was there anything that disappointed you?
Although inexpensive, it is not as good as the quality of FOR JAPAN MODELManufacturer.
View detail
Fits: HONDA Dax 70, HONDA dachshund, HONDA Shirley 70
I think it's well done.
I put it on the DAX.
There was no need for any special processing, it was installed normally and attached nicely without any discomfort.
I have other parts from this company and thought I would consider purchasing them!
View detail
Fits: HONDA Dax 70, HONDA cub, HONDA monkey, HONDA dachshund, HONDA Mighty Ducks (ST90)
Not compatible with MONKEY.
Although it is said to be compatible with the MONKEY, in reality, it interferes with the chain case cover of the STD of AB27 and Z50J and cannot be installed without additional processing with a grinder or milling machine, etc. although it mates with the spline of the shift shaft. It is a terrible thing. View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
A simple installation Instruction Manual is included.
I drilled a hole on the opposite side of the original hole in the bracket of the brake switch, and changed the bolt where the spring of the brake switch would be applied. Spring of the switch and the return spring of the brake pedal can be applied together. (Spring has been replaced by Spring used for Muffler silencer) The instruction manual doesn't write about it at all, and the LINK of Shift was removed from the original assembly, and it was made opposite. There was a diagram of the sample in the instruction manual, but because it was troublesome to make a hole, I cut it to the shape of V according to the shape of Rear Sets. In my car, Shift side interfered with Swing Arm, so I put Spacer. The position is very good, that is the key. View detail
Fits: HONDA CT125CT110 HUNTER CUB, HONDA CT125CT110 HUNTER CUB
Does it work? Better than not wearing it?
[How is it used?
From daily driving to touring, etc.
Was the one you received as per Image?
As per Image, the texture isn't bad (almost invisible after installation)
Was the installation difficult?
It's easy if you know the steps, and it's easy if you can adjust the chain tension.
How was your experience with it?
"You'll be able to ScauperScauper and Change. But unfortunately, I didn't feel any effect.
Maybe I'm being insensitive, but...
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
I didn't feel the effect, I think Clutch adjustment or Oil change is more effective.
Point and hang of installation
First remove the 6 Footpeg Mounting Bolts, then move the footpeg and Side Stand to the rear to make room for the Change Pedal removal.
[With or without Instruction Manual
There is not, so you can look it up on YouTube etc.
[Musings]
Quantity:I think it's not rigid enough because it's fixed with 2pc long bolt.
View detail
Fits: HONDA CT125CT110 HUNTER CUB, HONDA CT125CT110 HUNTER CUB
Making up for Honda's design mistakes
The price is about half of other manufacturers, and the quality is good, although I do not know other manufacturers. I received the package and was able to put it on in less than 10 minutes. I haven't done any actual driving yet, but the shift change seems to be good for Large. I'm looking forward to the weekend. And thank you WebIKe staff for your quick response. View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA monkey
Used for assembly from Frame
I used it as a substitute for OEM, but I am satisfied with the cheap price for the same etc. as OEM. View detail
Fits: HONDA CUB, HONDA CUB, HONDA CUB, HONDA CUB
Great product, cheap as hell!
I've been looking for a cheaper alternative to the OEM footpegs because the OEM footpegs were getting bent over time.
The results are good.
good point
Brake, footpeg, and STAND are Quantity:Set so total replacement is possible.
The price is cheap for this content.
Installation accuracy is not bad.
I've been using it for a year now and have no problems at all.
A bad point
None
The best way to get the best results is to buy OEM, and if you're like me, you'll want to recommend a compatible product that's large and sturdy.
View detail
Fits: HONDA Dax 70, HONDA cub, HONDA monkey, HONDA dachshund, HONDA Mighty Ducks (ST90)
Does not match.
The lever is structurally different from the photo posted in the store. Due to the incorrect connection, the lip rests against the engine housing and it is not possible to change gears. Also, the workmanship of the part is low - there are untreated weld marks. I do not recommend buying. View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
Tanaka Shokai MONKEY Rear Sets
I installed it on my Chinese MONKEY. aluminum texture is more beautiful than I expected. I think it's good for the price.
There is a slight rattle in the pedal bar.
The footpeg part needs a little more strength.
As you can see in the picture above, the Kick Arm hits the Brake Side depending on what you have, so it's better to use KITACO's or Takekawa's. Also, the pedal of the toe is obstructed by the Kick pedal, so I put a collar.
When you install the footpeg on the GEAR side, you need to be careful because there is a gap in the arrow. I inserted the collar because there was a gap of about 7cm.
Also, Arm was on the outside, so I put him on the inside.
View detail
Fits: HONDA MAGNA50, HONDA MONKEY, HONDA GORILLA, HONDA DAX, HONDA BENLY50CD50, HONDA BENLY50CD90, HONDA JAZZ, HONDA DAX70
Aluminum brake pedal
I installed it on SUPER CUB90 with Brake Adapter. How about installing it with a sense of fun? View detail
Fits: HONDA MAGNA50, HONDA MONKEY, HONDA GORILLA, HONDA DAX, HONDA BENLY50CD50, HONDA BENLY50CD90, HONDA JAZZ, HONDA DAX70
Brake pedal cover
I installed it on my SUPER CUB, it has Accent. View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
Perfect for MONKEY-type foldablefootpegs!
The Clutch cover has been sticking out since I made the Specula and the OEM footpegs are no longer attached.
I changed to this footpeg for the goodness of Parenthesis because I decided to use Universal's Foldable footpeg. It is good that there is a thick and very powerful place.
Spring of footpeg return is included, but I can't put it on because I don't know how to install it. Installation. Only 3 points.
View detail
Fits: HONDA MONKEY, HONDA GORILLA, HONDA DAX, HONDA CHALY 50, Others , HONDA DAX70, HONDA CHALY 70, HONDA ST90 (ST90)
It is not usable
First of all, the Material is too hard and seems to be Plastic, not Rubber
It looks slippery on a rainy day
Besides, it's guaranteed to fit, but I couldn't install it on my GORILLA 6v
View detail