Reviews
Fast delivery..good quality
This is a very nice product.
It's the same as the product description.
I think the assembly process would be easier if you attached a photo of the completed assembly, but I'm a little disappointed.
The quality of the product is excellent, delivery is fast and I am very satisfied in many ways..^^
May your business prosper..haha ------------------------------------------------------------ -------------- This is a very nice product. It's the same as the product description. I think the assembly process would be easier if you attached a photo of the completed assembly, but I'm a little disappointed. The quality of the product is excellent, delivery is fast and I am very satisfied in many ways..^^ May your business prosper.. haha Powered by Google Translator
View detail
photographic prints that you can take home with you
With OEM, the footpeg interferes with the footpeg when the foot is lowered, so I purchased this to eliminate this problem with Rear Sets.
There was no instruction manual and it was difficult to install. (Amateur work, about an hour for Small) The position can be adjusted from 4 levels,
Large Variety Satisfaction
View detail
Fits: KAWASAKI ZX-25R, KAWASAKI ZX-4R, KAWASAKI ZX-4RR
It is easier to put in Neutral when stopped.
The one that makes it easier to get into Neutral, which you'll know when you use it. View detail
incomprehensible
Instruction Manual is too complicated and difficult for beginners. I think some knowledge is necessary. View detail
I was able to install it on the 2023MODEL with no problems!
I am a 171cm tall male.
I am clumsy & mechanically challenged, but I was able to install it easily.
The position is fixed (one choice), but it is not at all uncomfortable.
It is now difficult to hit the footpeg without having to put your foot down forward when stopping.
The riding posture has become easier and my knees are not stiff even after riding for a long time.
View detail
Replaced from GALE SPEED due to spec. change.
Replaced from GALE SPEEDFoot controlKit due to spec. change.
GALE SPEED has a large number of cut-out parts, and although we liked their appearance very much, we had to give them up in tears due to a combination of other parts.
To be honest, as others have mentioned, I did not have a good impression of Babyface because of the cheap Boltetc. and the use of many Bolts for position adjustment such as Shift lever.
When the actual product arrived and I opened the package, I found it to be smaller than GALE SPEED.
It could be said that the chattiness of the product led to its lightness.
Parts are individually packed, and I liked it because I could tell if screws were over- or under-assembled during assembly.
Others have mentioned that the exhaust device drive wire interferes with the exhaust, but I have addressed this by wrapping the wire around the Colgate Tube as shown in the photo.
After the installation and test run, I wrote about how I thought it was too small and how I felt about it.
I was concerned that the use of a large number of Bolts might make it feel clunky, but there was no unreliable feel at all.
I knew it was because Babyface's products are designed to be used in Race.
I personally like the color Large Osaka Gold, but I thought it looked meh when I saw it installed on other people's motorcycles while touring, but when I installed it myself, it had a strong presence and lifted my spirits.
View detail
I am satisfied.
The texture is good and the Position is satisfactory.
You can select multiple positions, so you are sure to find one that suits you.
Knurl knurling is fine and grips well.
Instruction ManualFor those who are not familiar with Custom, we recommend that you install it in the Shop because it is difficult to understand.
It would be a little easier to understand if there was at least a Seal on the bag to indicate what part number is in the Instruction Manual.
View detail
Parenthesis OK
I replaced it for use at Circuit.
Anodized is Parenthesis good.
Installation can be done according to the Instruction Manual.
It's easy
No processing was required.
Position can also be changed, as the range is large.
It was a challenge to get Shift to work together.
I fell over once, but only the tip was shaved off.
Repair Parts is expensive, so we have to go to compatible parts.
Change.
It is good because it is not dedicated.
View detail
Very good looking, but...
Pulling on the brake wire is important, but securing the rotating bracket is impossible with a screw lock, and the bracket inevitably moves. However, I think that a more ingenious bracket is needed instead of just using the OEM bracket. View detail
Various position adjustments are possible.
Installed on a YZF-R6. Racefootpeg is listed as not compatible with ABS, but I was able to install it by bending the brake pipe. (I was able to install it by bending the brake pipe.)
Brake switch must be hydraulic.
Position is currently used at the bottom and front of the first for my body type.
One part of the Cowl needed to be cut because the tip of the Shift Pedal was in contact because of the Under Cowl of Magical racing.
I often use the rear brake, so I was able to adjust the position to one that is easy to operate, and I am satisfied.
View detail
Rear Sets are a necessity
I have always had Rear Sets on every Motorcycle I have ever ridden. I still have Babyface on my H2 and have been using it for 8 years and it is non-trouble.
However, the GizaGiza attached to the footrest is so sharp that it scrapes the bottom of the boots more than necessary and scratches expensive leather pants, so I have replaced the footrest with one from another manufacturer.
This time, SV's are smoothed by File only at the edges. Even so, the foot will not slip.
I had an MT09 made by Over on my SecondMotorcycle ride before the S V, but the GizaGiza was really sharp and I had to shave it down quite a bit with a File. Compared to that, Babyface is only in the way at the end, so I bought it this time thinking that I could just shave that part off.
As for the position, it is easy to ride without any complaints. It is also pulled inward, making it easy to get a good knee grip.
The Handlebar is lowered from the NORMAL position, so the Position is reminiscent of the old Racer replica.
You can be sure to choose Babyface, which is selling well both in Japan and overseas.
View detail
Spartan aluminum cut-out fixed footpeg
Aluminum Cut-out Fixed Rear Sets. position is a little bit backward compared to Normal. I am dissatisfied that there is no Pedal ReturnSPG on the Rear brake side, but I bought Master Cylinder ReturnSPG for Master Cylinder separately and installed it. I'm also a little dissatisfied with the fact that the shift side can't be reversed shifted without purchasing repair parts, but I guess that's about it. View detail
Installed on CBR1000RR SP SC77
CBR1000RR SP It was installed on a 2018 MODEL.
Quick shifter is also working perfectly.
They function well as Rear Sets.
The footpeg is number one for its non-slip nature. It is well machined and does not slip at all. You can step on it with confidence.
Some reviewers are concerned about the rigidity of the product due to the large number of parts, but I don't know, and I don't feel any concern at all.
I really like the Gold color, which is flashy but matches the body of the car.
The position of the footpeg is not too tight as long as it is in the mildest position.
It is likely to meet a wide range of needs, as it can also achieve aggressive positioning.
View detail
The body of the car has been tightened.
I didn't like the look of the OEM large footpeg.
Black.
It is identical to the Black of the vehicle and has been tightened.
I'm satisfied
View detail
Large satisfaction!
Tandem bracket and Silencer hangerQuantity:I put it on nc42 with Set.
Position is now Race ish and Large satisfied!
The installation was not that difficult as I was able to replace it while watching the video as an amateur.
.
It seems that the OEM tandem footpeg is used as it is, so you have to cut a part of the plate between the tandem footpeg and the tandem bracket to get the footpeg to stick.
Plate is thin and can be easily cut.
View detail
Tightened.
I didn't like the look of the big footpeg (Tandem collaboration) in Silver color.
This time I bought it
The size has been reduced to a small size and the color has been changed to black, the same color as the body.
It looks tighter.
I considered other companies, but I liked the design of BabyFence.
I am glad that I am here.
View detail
It can be pontooned and is cosmetically perfect!
We had previously installed an off-set plate from another manufacturer, but the movement width was only slightly small and we were not satisfied with the position, so we replaced it with this product.
The position has been moved up considerably from the previous one and moved back one more turn.
The posture is not unreasonable, and I feel less tired even when touring.
The included screws are solid and do not rattle. I prepared a screw lock, but it does not seem to be necessary.
View detail
Good dress-up and practical aspects. Screw lock is a must!
I bought Rear Sets for the MT09 because the OEM can raise the footpeg position a little, but the Circuit started to rub the footpeg.
・ Baby Face The decision was made after hearing that the "Kospa" was a good cosmetic product.
The color selected was inconspicuous Black.
【good point】
The construction is very careful. (No BALI, etc.)
Positioning can be selected from 5 locations.
*This time, move only upward, not backward.
Adjustable details (Brake, Shift Pedal).
The footpeg surface is machined to prevent slipping.
Screw lock agent is included.
Parts can be ordered in case of damage (stated).
Cheaper than others.
[Not good].
The Instruction Manual for handling is difficult to understand.
Spacer of "Orange" means "Clearance" and is installed so that the parts do not collide with each other when shifting.
Rear brake fluid needs to be relocated.
It is difficult to use Tandem Footpeg together in Circuit driving.
If you use Rear Sets, you cannot do toe footpeg without removing the Tandem Footpeg, because the heel hits the Tandem Footpeg when you step on the toe footpeg.
Brake pedal positioning adjustment range is narrow.
I've been riding on the street.
Moved up about 4 cm.
Position was raised, but not to the point of extreme knee bending.
I'd like to share my impressions from the Circuit run.
I no longer rub the footpeg.
Shift Pedal is slightly grounded. (Adjustable)
Photo 1:List of parts
Photo 2:OEM footpeg. rubs even when raised one level.
Photo 3:Flat comparison of OEM and Rear Sets.
Photo 4:RearBrake fluid. after implantation.
Photo 5:Distance from the ground. It rises about 4 cm.
Photo 6:Shift Pedal comparison. Plans to adjust a little higher.
View detail
Used for ZX-10R 2019
There are only a few Rear Sets that can be reverse-changed, and after much agonizing, I purchased a footpeg made by Babyface. The appearance and machining quality is very good.
Although it is not a defect, I thought it would be better to use a silver bolt on a black footpeg, so I changed to a painted high-strength bolt in the attached photo + the OEMB bolt was baked painted black. Therefore, the image is a little different from the one that was bought and installed as it is.
The instruction manual also stated to reverse the Sensor of the Quick shifter. The instruction manual also states to reverse the Sensor of the Quick shifter.
I thought it would be a hassle, so I assembled it as it was without reverse mounting, and it worked normally without interference.
However, the Clearance of Sensor and Change Pedal is only 0.5mm, which is scary, so I changed the color of the footpeg side of the Change rod and Bolt.
Clearance can be obtained by changing (1) in the Red circle to ultra-thin low head bolt M6L25, (2) to t1Aluminum Collar, and (3) to t5Aluminum Collar (Included Parts:t3) in the attached photo. If Sensor and Change rod interfere with Frame when you change above ? to ?, it would be better to use thicker collar to fit to the car body to let them go. I did not have any interference, so I left it as "Included Parts:".
Since there may be differences between each car body, it would be good to select a color based on the actual size if the Sensor is not reverse-mounted.
View detail
BabyfaceRear SetsQuick shifterMODEL
[How is it used?
For dress-up purposes.
Was the one you received as per Image?
Image
Was the installation difficult?
I asked DREAM to do it.
View detail