Reviews
Beautiful Yoshimura parts
Parcel received in France very quickly, barely a week. The package is very well packaged and protected by Webike. The Yoshimura box is well made and the pieces inside are protected so as not to scratch each other. For the pieces themselves, well the Yoshimura quality is there, the pieces are gorgeous, the finishes perfect, the logo detail discreet. I am very happy with my purchase, I can't wait to install them. View detail
It does not correspond to Japanese Vehicle Inspection.
for RaceIt does not correspond to Japanese Vehicle Inspection.
I don't remember there being any regulations for vehicle inspections in FOOTPEG? I was wondering.
Purchased with the understanding that the Manufacturer would just not warrant it anyway due to the disclaimer.
When it came time to install it, I understood what it meant.
The Shift side is fine, but the Brake Side is not.
I cannot add a NORMAL stop-lamp switch.
Therefore, the Stop-lamp does not turn on even if the Rear brake is stepped on.
So what to do about it, I hear it's common in other Rear Sets.
A separate Hydraulic Switch attached to the Brake line will solve the problem.
However, to do so, it is necessary to remove the banjo bolt of the rear brake and bleed the air.
Also, the stop-lamp switch needs to be wired.
The work itself is not that difficult, but it is dangerous for beginners Level, so choose to hire a PRO!
Feels good after installation.
Gear changing also seems to be well determined in a small way.
Position is still a little tight.
The non-slip surface of the footpeg is quite sharp and I don't think it slides at all.
The soles of the shoes feel like they are being scraped off, so be prepared for that to a certain extent.
View detail
Fits well with White body
Since the OEM footpeg is Silver, the impression can be tightened without destroying the color balance.
Pre-assembled, footpeg is set at 23mm for a natural feel and easy adjustment of Stop-lamp lighting.
The overall stability has been improved because it is easier to hold the ankles, although the body is originally designed to have a natural knee grip.
If you are installing it by yourself, you need to use Pliers for Split Pin and Torque Management, and be careful not to forget to tighten them.
The first unit also had the Rear Sets installed, but it was a little more difficult because of the Full Cowl, the Quick Shifter, and the need to remove and insert the Split Pin.
The Instruction Manual is written for people who know what they are doing, so if you don't have the tools and knowledge, you should bring your own tools or buy them from a shop that can install them.
The item is definitely nicely finished and the Pedal's Rubber is solid.
Since there are not so many parts of a motorcycle that can be played with, this is recommended for those who want to create something different from others in areas other than the Handlebar area, Exhaust System, and Fender.
View detail
Easier to step on.
Brake pedal was short and difficult to step on. View detail
Expensive but satisfactory!
I heard that there is a popular trend in Jig Sir, HAYABUSAClutch pedal replacement.
If that's the case, why not install Parts for the GSX1300R HAYABUSA? I thought so!
Movable Clutch pedal!
We succeeded in putting it on as expected....
FEELING good, went well, beautiful and looks good.
View detail
Things are best ?? with notes
I bought this product because of the look and the Position.
The texture and build quality is as good as OVER!
I bought it without thinking, but there were pitfalls.
View detail
Fits: KAWASAKI 1400GTR, KAWASAKI NINJA1000, KAWASAKI NINJA250, KAWASAKI NINJA400, KAWASAKI Z H2, KAWASAKI Z1000, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI ZRX1200DAEG, KAWASAKI ZX-12R, KAWASAKI ZX-14R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-9R, KAWASAKI ZZR1200, KAWASAKI ZZR1400, KAWASAKI NINJA1000SX, KAWASAKI ZRX1200S, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S
Wow that's cool
It's cool
Note that ERing pliers make OEM removal easier.
Also, be careful not to apply the screw lock agent described in the Instruction Manual, otherwise it will loosen and there is a risk of it falling off.
View detail
Attention ??
Brake switch recommends hydraulic pressure.
Also, the mounting bolt interferes with the chain slider, so countermeasures are needed.
View detail
Looks good.
The color and shape are great.
My calves no longer hit me when I put my feet down.
View detail
KITACO heel plate set
The heel plate creates a lot of scratches because it touches the shoes before they are worn. Wearing a heel plate has a dress-up effect, but it is very good because it also protects the heel plate. The color is also silver and the X-shaped design makes the monkey cuter. I recommend it because it's a product that can be easily mounted. Thank you. View detail
To CHALY's Custom!
CHALY This is the Rear Sets of the "Rear Sets"! The price is a little high, but the look and performance are perfect! View detail
I was able to install it on the 2023MODEL with no problems!
I am a 171cm tall male.
I am clumsy & mechanically challenged, but I was able to install it easily.
The position is fixed (one choice), but it is not at all uncomfortable.
It is now difficult to hit the footpeg without having to put your foot down forward when stopping.
The riding posture has become easier and my knees are not stiff even after riding for a long time.
View detail
Very good ??
Perfect, I think this is the best way to use Circuit.
Color variations would have been better.
View detail
For GSX1300R HAYABUSA
[How is it used?
Installed on GSX1300R HAYABUSA
With OEM, the angle was not adjustable, so my knees often hurt when I rode long distances.
This one is very convenient because it can be adjusted to various angles.
Was the one you received as per Image?
Yes, exactly as pictured.
The box design is perfect.
As expected of YOSHIMURA.
Was the installation difficult?
Instruction Manual is included, so if you can replace the oil to some extent, this one should not be too difficult.
How was your experience with it?
YOSHIMURA is the best
feel well
[Included Parts:were they on?
Instruction Manual、Sticker
[Was there anything that disappointed you?
It's a bit expensive
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Not particularly.
View detail
Replaced from GALE SPEED due to spec. change.
Replaced from GALE SPEEDFoot controlKit due to spec. change.
GALE SPEED has a large number of cut-out parts, and although we liked their appearance very much, we had to give them up in tears due to a combination of other parts.
To be honest, as others have mentioned, I did not have a good impression of Babyface because of the cheap Boltetc. and the use of many Bolts for position adjustment such as Shift lever.
When the actual product arrived and I opened the package, I found it to be smaller than GALE SPEED.
It could be said that the chattiness of the product led to its lightness.
Parts are individually packed, and I liked it because I could tell if screws were over- or under-assembled during assembly.
Others have mentioned that the exhaust device drive wire interferes with the exhaust, but I have addressed this by wrapping the wire around the Colgate Tube as shown in the photo.
After the installation and test run, I wrote about how I thought it was too small and how I felt about it.
I was concerned that the use of a large number of Bolts might make it feel clunky, but there was no unreliable feel at all.
I knew it was because Babyface's products are designed to be used in Race.
I personally like the color Large Osaka Gold, but I thought it looked meh when I saw it installed on other people's motorcycles while touring, but when I installed it myself, it had a strong presence and lifted my spirits.
View detail
Buy with Spec. change
Purchased because the Rear Sets were replaced by another company and the length of the existing ROD changed.
The coating is more solid than other companies' RODs, so it is hard to scratch even if Spanner is applied to it.
After all, Terra Moto is a trustworthy company.
View detail
As the name implies.
As the name suggests. It is a stunning Assist. The price is reasonable and the cosmetics are good. View detail
Fits: SUZUKI KATANA, SUZUKI GSX-S1000, SUZUKI GSX-S1000F
Easily change Position
Used for GSX-S1000GT.
It is a recommendation to try it out because it is much cheaper than other Rear Sets Kit.
The footpeg, which used to be stuck in the calf when stopping, now moves backward so that the foot can naturally land on the foot.
When driving, the hip joint area is comfortable even in the Race ish position sitting behind the Seat.
Installation is also easy as it can be done with only 4 Bolt.
Quantity after installation:Pair (for Left and Right) Do not forget to adjust the vertical position of Pedal.
View detail
Attachment feeling
Frankly, I don't see much effect.
I guess it's like an apparent Attachment.
View detail
It's still Over.
[How is it used?
Rear Sets were introduced because the Normal step hits the calf when the foot is lowered and makes it difficult to get a good footing.
Was the one you received as per Image?
As per Image, Over's products have a good texture.
Was the installation difficult?
Installed with reference to the Installation Manual and YouTube. The troublesome Brake Side was installed without any problems.
I felt the shift rod was a little short.
How was your experience with it?
No more calf hitting the ground when lowering the foot. The rigidity while driving has also increased.
However, it is not Foldable, so when I was taking my foot off the footpeg at low speeds, my toe caught and I suffered a LargeDamage to my calf. Be careful. ←Just my own fault....
View detail