Reviews
![Rear Shock 330mm [HYBRID Series]](https://img.webike-cdn.net/catalogue/14758/cub16-hb-330r_TS.jpg)
Fits: HONDA monkey, HONDA Benly CD90, HONDA Super Cub 90, HONDA Super Cub 50, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA Benly CD90, HONDA Super Cub 90, HONDA Super Cub 50, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
I bought it just for the color.
I won't know for sure until I ride it for a while, but I bought it just for the color, so I am not particular about its performance. View detail
Fits: YAMAHA BW'S125, YAMAHA NMAX125, YAMAHA NMAX155, YAMAHA CYGNUSGRYPHUS, YAMAHA NMAX155
not bad
It takes a lot of time and effort to replace them, but I think it's good to feel a reasonable change.
There was an increase in vibration during Idling, but I didn't mind it so much myself.
View detail
Replacement from OEM suspension
The OEM suspension was completely worn out, so we decided to replace it with an external one...
Well, there is only one YSS or KN, but I happened to find KN Sus on sale at a discount, so I bought this one.
However, there is no Instruction Manual for handling, so without basic knowledge of rear shock, it will be very difficult.
The installation is also a little bit larger than OEM. (If you are not confident, you can ask for help or have a store do it for you.
.
We have tried various pre-roads, but basically, it is best to leave them as they are shipped. If you feel it is too soft, try turning it a little at a time to find just the right place.
Be careful not to turn the Spring more than half a turn, as this will stiffen the Spring and adversely affect the buttocks.
The damping adjustment should be adjusted to suit your preference.
The pre-road adjustment part is anodized, so the paint peels off easily, and it is necessary to wrap rubber around the hook on the wrench side to protect it, etc.
The O-ring on the collar breaks off easily. This can be solved by being careful when installing the collar, but when the collar comes off and is put back on properly, it will soon break off.
.
I can't say for sure since I just installed it, but I think a suspension with an adjustment mechanism will be useful in many situations. (Luggage, Tandemetc.)
I don't think it will break unless you tighten the pre-road abnormally or try to turn the damping adjustment beyond the limit.
It is not something to brag about like OHLINS, NITRON or YSS, but it is high performance enough.
It is better to choose this rather than to buy some Large-type suspension diversion, used OEM or low-priced version in auctions, so you will not make a mistake. I can assure you this much.
And if you look closely at this suspension, it looks like it's just a YSS suspension turned upside down... (my imagination
View detail
Fits: HONDA DIO (2Cycle), HONDA LIVE DIO, HONDA ZOOMER, HONDA SUPER DIO
It's changed.
The suspension that was on was worn out, and the thrust from the bottom was severe. View detail
Fits: YAMAHA SMAX, YAMAHA MAJESTYS
I think I'll enjoy Setting.
Removal and installation was easy.
The bolt that the suspension is attached to is so clean that it is hard to believe that it belongs to a motorcycle that has been used for 7 years.
Spring is a different thickness and length than Manufacturer's...
I'm sure they're making the ride more comfortable here, and it looks like the sag is adjustable.
I thought it was pretty good, but it doesn't come with Manual... What are the factory standard values? It was.
My impression of the actual ride is...
Seat height was raised just a little bit (Spring length was adjusted and installed, so it is almost the same as NORMAL).
When you ride up on the Gap, there is still a Shock, no difference between Normal and Large.
Rising up and launching Zero. They push you forward." It's fun to have a sense of what's going on.
It's my first day on board, so here's what I have to say.
I have to sag out and I don't know the standard value...
The only way to do this is by setting it up based on the feeling of the ride, but that could be fun too.
It may take a long time, but it may be the only way.
The colors seemed to be moving toward manufacturing convergence and only Blue remained.
Orange would have been nice, but oh well.
View detail
Fits: HONDA DIO, HONDA SUPER DIO, HONDA DIO FIT, HONDA LIVE DIO, HONDA SMART DIO, HONDA CREA SCOOPY, HONDA ZOOMER
Nice quality front fork
This machined aluminum front fork works fantastic on a Honda NPS50. They are of good quality and look nice. Do better than the original front fork. -------------------------------------------------- -------- This edited aluminum fork is fantastic on a Honda NPS50. Are of good quality and look nice. Do better than the original fork. Powered by Google Translator View detail
Fits: YAMAHA SMAX, YAMAHA SMAX, YAMAHA FORCE 155, YAMAHA Majesty S, YAMAHA Majesty S, YAMAHA BW'S R, YAMAHA BW'S 125, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X
All the OEM Parts you need are included.
It is better than ordering by parts Single Item, because it contains the parts you need. View detail
YSS better absorber
About quality and texture: SUPPERB quality absorber than factory About the feeling of use: VERY stable when riding Products to buy together: FOLLOW the preference wrench Difficulty of installation: USE profesional workshop Cost performance and comparison with other products: WORTH money to buy About shipping and packaging: WELL pack good with box Any concerns, cautions, or advice when purchasing: THIS spring bigger than original View detail
Purchased for MOTOCOMPO
During the restoration process, I was concerned about the rust on the rear suspension, so I checked outside the company.
It was out of stock at the time, so I used the in-stock notification feature.
I received an email that it would be in stock in a few days, so I ordered it right away, and it arrived and was installed in a few days.
The U-shaped width on the underside of the Shock is a little wide, so it does not fit well for installation.
It's an old vehicle, so I'm afraid I'll have to do as much good as I can to install it.
View detail
Fits: HONDA monkey, HONDA Benly CD90, HONDA Super Cub 90, HONDA Super Cub 50, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA Benly CD90, HONDA Super Cub 90, HONDA Super Cub 50, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Installed on MONKEY
The oil was leaking from a certain company's rear suspension that I had been using until then, and since I was scheduled to go touring in a few days, I decided to purchase this product because of its price and delivery time.
Can be installed on either MONKEY or CUB with or without the included collar. Damping force can be adjusted with the included special tool.
I think the cosmetics are good and the performance is fine.
I just wish there were several different colors.
View detail
![Forged Aluminum WheelFront and Rear Set[Type1]](https://img.webike-cdn.net/catalogue/images/105539/07122155_60ec3bbd77b53_TS.jpg)
Fits: SUZUKI ADDRESSV125, SUZUKI ADDRESSV125S
Forged Aluminum
I built it into a Tire that was sized up and it is lighter than OEM.
As one would expect from forged aluminum.
The dress-up effect is also very effective, and I was sure to get it.
View detail
![Shock Absorber [YSS]](https://img.webike-cdn.net/catalogue/images/105539/07180131_5b4e19cac16ec_TS.jpg)
KN shock absorber
About quality and texture Best quality than factory About the feeling of use Comfortable on the road Products to buy together Buy an extra nut Difficulty of installation Take out under seat is a must Cost performance and comparison with other products Value for money About shipping and packaging Nice in good box Any concerns, cautions, or advice when purchasing To use thin tyre because the spring bigger than original View detail
Fits: HONDA SMART DIOZ4, HONDA LIVE DIOZX, HONDA SUPER DIOZX, HONDA SUPER DIOXR, HONDA LIVE DIOSR, HONDA DIOSR, HONDA SUPER DIOSR, HONDA G DASH
Axle Color
Axle Color by kn project.
Slight weight reduction
View detail
YSS absorber special order color for KN project
I bought this absorber to replaced my original old Jog scooter rear suspension. It is easy to install. One of the best suspension with a fair price. This Black and Red color YSS are been made special order from KN project Japan. It's adjustable up to 5 level. The best thing are they came with wrench for the adjustment together with the nut from YSS. Value added for money! Sure I will review the performance after an installation. Very friendly service from Webike! View detail
![ชุดโช็ตหลัง [ปรับได้]](https://thimg-afcc.kxcdn.com/@wth-shop/assets/photos/review/16904475871690447587418.jpg)
สวยงามทนทาน สินค้าตรงตามที่สั่ง ระยะเวลาในการสั่ง กับระยะเวลาในการส่ง ถือว่าไวมากๆ ถูกใจตามความต้องการ สั่งมาร่วม 20 ครั้งแล้ว สินค้าไม่เคยมีปัญหาใดๆ จะสั่งต่อไปเรื่อยๆนะคับ ขอบคุณมากคับ View detail
Fits: HONDA monkey, HONDA Benly CD90, HONDA Super Cub 90, HONDA Super Cub 50, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA Benly CD90, HONDA Super Cub 90, HONDA Super Cub 50, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Mounted on MONKEY 16cm RONSUI
We found that oil was leaking from a certain company's rear suspension that had been installed until then. Since we were touring the following week, we hurriedly ordered a replacement suspension.
I am satisfied with both delivery time and cost performance.
However, I think the color doesn't match my motorcycle. I will ride with this suspension for a while.
View detail
I chose it for its price.
The price was a little over 2,000 yen for 4 pieces, so I chose Gold, the same color as the Wheel.
The quality of the actual product feels reasonable for the price.
In my case, I value price more than quality, so I am fully satisfied.
View detail
Fits: YAMAHA Jog 90, YAMAHA Axis 90, YAMAHA Jog 90, YAMAHA Axis 90
life prolonged
1994 CYGNUS XC125T The car has traveled 28,000 km.
While commuting to work, the engine suddenly started spinning out of control, and I thought the belt had snapped, but upon closer inspection, I found that the splined part of the wheel had been shaved off.
I was thinking it was time to part ways with Spline, but this hub has the same diameter as a fraction of Spline, and I thought it might work, so I ordered it.
I ordered wheels for the GYRO, thinking they would work, and although some modification was required, they were able to run. Tires only fit 110/60R12, DURO only.
View detail
Fits: HONDA monkey, HONDA Benly CD90, HONDA Super Cub 90, HONDA Super Cub 50, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA Benly CD90, HONDA Super Cub 90, HONDA Super Cub 50, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
I like the look of it!
Anyway, I bought it because Red was good.
I am sure that the performance aspect is normal,
View detail
It looks good at first glance.
I never put my feet up here when I ride lol.
I don't know, I've never ridden the Circuit on a Scooter, but I'm sure they let you ride it.
I bought it as dress-up parts, so this "looks good" is good enough for me.
View detail