Motorcycle Suspensions / Rearsets / Wheels / Swingarms Reviews

Filter

Write a review and get Webike Points!

Reviews

Suspensions / Rearsets / Wheels / Swingarms Clear all

SP Takegawa

17 Apr 2024

Rear Shock Absorber

Fits: HONDA MSX125SF, HONDA GROM, HONDA GROM, HONDA MSX GROM, HONDA MSX125

Japanese Webike user

5/5

To improve ride comfort

[How is it used?
Maximum one-way distance is about 200 km for city driving and touring.
Was the one you received as per Image?
Spring's paint and construction was solid.
Was the installation difficult?
The Exhaust System was removed and a hard plastic box was placed under the Engine to float the Swing Arm and suspend the Grab Bar by the Chain Block.
If you can lift the car body, it may not be a problem, but basically, it may be better to ask Shop to do it for you.
How was your experience with it?
The ride quality is very good. I don't know about the Others yet as I am still breaking it in.
[Included Parts:were they on?
Pre-road and ride-height adjustment tools were included.
[Was there anything that disappointed you?
nothing special
Other items that would be helpful
The OEM shock of point and hang JC92 is 240mm, so we shortened it to 245mm, which is 5mm higher than the original height. View detail

MONO LINE Rear Single Shock [MZ Series] MZ366

KOOD

17 Apr 2024

Front Axle Shaft

Fits: HONDA CT125 CT110 HUNTER CUB, HONDA CROSS CUB 110, HONDA CROSS CUB 50, HONDA SUPER CUB C125

Japanese Webike user

5/5

The difference is obvious.

I was considering SP Mukawa's Hollow Bolt, but after reading the impressions of this product, my heart was moved.
There was once a time when parts called Front Fork Stabilizer were popular.
Motorcycle front fork with upper and lower Three-Pronged Fork and Axle Shaft with Quantity:Pair (for Left and Right) are connected.
Quantity at the top of the bottom case between the bottom Three-Pronged Fork and the Axle Shaft, which is the longest distance.:Pair (for Left and Right) This is a Parts to increase the strength of the entire Front fork by connecting the
In the case of the CUB, the Three-Pronged Fork is only on the bottom, and the Front Fork is connected to the Three-Pronged Fork and the Axle Shaft in only two places, so it is obvious how much effect an increase in the strength of the Axle Shaft would have.
In addition, the precision of the product (i.e., as close to straight as possible) and the hard plating reduces rotational resistance.
Installation is simply a matter of replacing the OEMParts, so if you have the proper tools, it takes only 10 minutes.
From the moment the installation is complete and the Center Stand is lowered Ale?" I thought
The motorcycle moves forward as if it were on a downhill.
Clearly, the rotational resistance of the front wheels has been reduced.
The feeling of improved acceleration and fuel economy, or the feeling of sticking without Downshift on uphill roads, may be the Brush-bo effect.
While driving, the road surface conditions are now more palpable than before.
It may be that what was previously missed by Axle Shaft deflection is now being transmitted to Direct.
I like this feeling, but some may not like it.
Shaft1 pc is only 1000 yen for OEM parts and 3000 yen for SP Mukawa, while this is over 20,000 yen, and it is not a part that can be seen at a glance, so it is not considered by the dress-up crowd.
The high precision and finish of Parts can be seen just by holding it in one's hand.
I hate putting sticky Stickers on my car, but I was so impressed with how great this Axle Shaft is that I put the included Sticker on the Bottom case.
We recommend it to those who want to ride more comfortably and pursue the original Motorcycle riding style. View detail

Forged Aluminum Wheels M7RS Genesi Front and Rear Set

MARCHESINI

15 Apr 2024

Forged Aluminum Wheels M7RS Genesi Front and Rear Set

Fits: KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 (water-cooled)

Japanese Webike user

4/5

I bought it...

I finally got my hands on Wheel!
And in Marchesini!

At first I was thinking about GALE SPEED or OZ RACING.
Over the past year, Wheel has gone up in price considerably and Gale has lost its value for money.
OZ RACING has become more expensive than Marchesini
470,000 yen for standard Anodized Color, 550,000 yen for Paint
Too expensive.
Marchesini the King in his own value system, the nobleman OZ
I felt like a commoner GALE SPEED.
If they undercut that and the price exceeds Marchesini's, I'd choose Marchesini.
And GALE SPEED's Brand power is inevitably weak compared to other niManufacturers.
Add $140,000 to Gail's GP1S and you'll be promoted to Marchesini.
That Marchesini didn't like 7 Spokes at first and shunned it.
See, 360 degrees around the circle is not divisible by 7.
This means that somewhere out of the seven, there is a disproportionate etc.
It's kind of creepy, isn't it?
The price and design lightly erase such thoughts, a lack of conviction.
As a result, I chose Marchesini's M7RS over Gale and OZ.

Review from here
I knew it was lightweight, but when you actually ride it, it changes more than you can imagine.
The forging and thin Rim make the GYRO effect much weaker.
It feels like the head goes in and falls down without the action of bending it.
It's so light that I'm afraid it's going to fall over as it is.
To be honest, I've seen a lot of these reviews and sometimes I wondered how they could change like that.
I can feel the difference when I feel it. Even I, an insensitive person, can feel the difference so far, so I guess normal people can see the difference, can't they?
There's Merit, of course, but there's also the downside of the lighter weight and reduced GYRO effect.
First of all, straight line stability is reduced, if not to the point of dizzying.
I get the sense that there's something unsettling about it.
I wonder if it is noticeable when the speed exceeds 100 km/h.
Also, Small Gap is transmitted as vibration.
This is thought to be due to the fact that the lighter weight is not fully absorbed and transmitted.
Maybe once you get used to this area, you won't mind.

Also, I've seen a few reviews here and there that say it's often springy.
I think I can solve the Large one by setting up the suspension.
The place where the Wheel was installed has various know-hows and
I didn't have the feeling that I'd be hosed if they did the Setup for now.
It looks good, performs well, and you won't regret buying it.
I myself bought it 80% on looks, so it's unlikely to be effective.
I think it is very effective Large for people who drive fast and furious on mountain roads. View detail

YSS

15 Apr 2024

MONO LINE Rear Single Shock [MZ Series] MZ366

Fits: YAMAHA TW225E

Japanese Webike user

3/5

Large things are not explained! It is much shorter than OEM!

Caution before performance crap! This suspension. It's short. (Angry)
It is listed as TW200/225 compatible, and since there is no explanation, I thought it would be the same size, but it is much shorter than the OEM suspension.
If it wasn't the same size, I would have hoped there would have been an explanation. If I had known it was short, I would never have purchased it!

Seeing things, Once I don't have a ShacoTan in my off car. I paid high gold to buy Garbage. I was disappointed.
I doubt the designer's Sense, even if it's the old fashioned Ska tune type Custom. no Sense!

However, I paid a good amount of gold for it, and since it has been sitting for about six months after purchase, I would not be able to return it......so I am in an atrocious mood,
Since it has a coilover function, I extended it to the limit and installed it. Still, it is a little shorter than OEM. Too bad.
Comparing the appearance before installation, the damper section looks thinner and poorer than the OEM.
Pre-road is installed as shipped. Attenuation is at its lowest.
The front side is equipped with a Cartridge emulator and pre-road is also applied.

When installed, the suspension itself is shorter, but the spring rate is higher from the beginning and the sag is reduced, so the Rear ride height is higher at 1G's ride. (The optical axis is lowered.)
This is not the kind of thing I wanted, but I feel ・・・・ indescribable・・・・
Normally I wouldn't want to give it even 1 star, but after riding it... not bad ・・・・
Things are not bad.
It's very well controlled and of high quality. It is clearly different.
Completely stiffer for on road use. The front end tends to cut into the road as the vehicle's ass rises higher than the OEM during cruising.
It picks up fine Gap and has a lumpy feel. However, when stepping on the Gap or swell while turning, it becomes a crisp and snappy leg without wobbling. It is honestly easy to ride.
I think this will increase the risk of cocking up when going off-road, and I don't think it will be a comfortable ride...
It is intended for long-distance travel with luggage, so maybe a harder taste that is not as heavy is not a bad thing...
Supple in the beginning, stiff in the back. Stroke is up if you want....

I didn't get what I wanted due to the lack of explanation, but things are good from a different perspective and well, this is what I got.... It was the Rear Suspension that made me feel indescribable.
I don't like even 1 star if it's just for the emotion. But considering the performance of the product, it's not bad at all, in fact, it's rather admirable. I rated it as 3 Stars because of this.
It is very good for on road driving....
Whatever the case may be, I would have liked to have seen a better description of the product.

This would be good for those who are customizing for on road or want to lower the ride height.
The stiffer design may be suitable for heavier people or those who carry a lot of luggage.

Sorry for the poem. View detail

YSS

14 Apr 2024

MONO LINE Rear Single Shock [MZ Series] MZ366

Fits: SUZUKI GSX-R 125, SUZUKI GSX-R 150

Japanese Webike user

5/5

GSX-S (R) The 125 can really come into its own & Comfort is also increased.

[How is it used?
Normal shock is not affected by my pre-road ^^^; I still had to buy a new one even though the price went up due to the recent depreciation of the yen.

Was the one you received as per Image?
YSS is the third one including other cars? It's Quality with no problems.

Was the installation difficult?
It was installed inexpensively by Shop at the time of delivery. Thank you very much.

How was your experience with it?
It is normal. The suspension does its job normally and allows you to ride comfortably and according to your will in all situations. It also complements the shortcomings of PonhangSeat to a great extent.

[Included Parts:were they on?
It may have had a stick for adjusting the Initial (I vaguely remember). (I vaguely remember.) However, as you can see in the picture, it is quite tight, so I don't know if it would be useful.

[Was there anything that disappointed you?
Nothing special in terms of performance. I have not looked at the damping, but it looks like it is too large. I haven't looked at the damping, but it seems to be as large as it is... It would be nice to have a separate adjustable damping for the advanced VERSION.

GSX-S (R) The Shock is hard (both front and back). It is more expensive, but it will be normal just by changing to this one (or another Replace product). If you ride for a long time, I would recommend it. View detail

ACERBIS

14 Apr 2024

Chain Guide Block 2.0

Fits: KAWASAKI KX 250, KAWASAKI KX 250X, KAWASAKI KX 450, KAWASAKI KX 450X, KAWASAKI KX 250F, KAWASAKI KX 450F

Japanese Webike user

5/5

To protect Chain.

Product Name
ACERBIS ACERBIS Chain Guide Block2.0

Item Number
AC-17950BK

Vehicles
Honda CRF125F 2024 MODEL

Number of man-hours
20 min.

Required Tools
Torque wrench, hexagon socket, Hexagon socket, Extension bar, Combination wrench, -Driver, Hammer, Pliers, etc. would be perfect.

Why did you choose this product?
I chose this one because CRF125F does not have a solid Chain Slider. I also chose it because it was recommended by others.

Was the one you received as per Image?
It was just as Image.

Was the installation difficult?
It is difficult for an amateur to get it on the CRF125F because you have to weld it on. A welder is required.

How was your experience with it?
It is solidly built and Enduro will be able to do so without worry.

[Included Parts:were they on?
None in particular.

[Was there anything that disappointed you?
None in particular.

Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer View detail

KITACO

14 Apr 2024

Front Fork Top Bolt SET

Fits: HONDA glom, HONDA DAX125, HONDA MONKEY125

NO NAME

5/5

They sure do increase the appeal when fitted to a set of red forks on the Monkey 125

About quality and texture - The front fork top bolt set from Kitaco is made from billet aluminum with detailed machining and a red anodized surface finish, the quality from the overall fit and finish is perfect. About the feeling of use - This top bolt set serve no purpose other then to increase the appeal on the Monkey 125 and they sure do achieve that when fitted to a set of red forks. Products to buy together - A key product to purchase when working on the front forks would be a set heavier set of springs as the original ones need upgrading for just about everyone that ride a Monkey 125. Difficulty of installation - The installation of the front fork top bolt set is an advanced task that took 1 hour complete due to the unloading of the front forks and loosen of numerous fasteners allowing for access. Mechanical aptitude and the use of basic hand tools is what is required to secure top bolt set to the front fork tubes. Cost performance and comparison with other products - I find the cost of all the products Kitaco sell to great value when compared to what most other companies sell their products for and the front fork top bolt set is no different. About shipping and packaging - With there being no cost difference between sea freight and EMS for the front fork top bolt set, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing. View detail