Reviews
Shift feeling is better.
I purchased this product to adjust the position of the shift lever on my MONKEY125. The quality of the product is not so good? I would say that the Pillow ball had a little rust on it, so I polished it. As written in other reviewers, it is longer than OEM even at the shortest length. 。 I think it is possible to adjust it by shifting one of the Lever's source as shown in the Instruction Manual. We only need to be able to adjust it!
After installation, my impression is that the fee rings are better because there is less rattling. I think the fee rings are better.
It's affordable, so I think it's worth buying.
View detail
GCraft Swing Arm Triple Square
As long as you have a Jack, you can easily replace it.
It has not been driven yet, so the effect is unknown.
I think we were able to reduce weight from OEM.
I hope it will last for a long time.
View detail
Parts found in the "I wish I had..." section
I was not used to the Seesaw Pedal on the Nokla Dax125 during the break-in period, and I was also stubbing my toe on the Downshift,
I thought, "I don't need Sisowo Pedal for this," but then I casually looked at Webike and found a front-only Pedal!
So I quickly ordered it.
It's a regular SteelChange Pedal, but OEM-like? It was a normal clean textured and finished Pedal.
The feel is fine, but if you have two CBs with regular Return, you can use Positive Shift and Reverse Shift (or something like that?). and sometimes
Change mistakes are often made;
Maybe it's good for old Riders like me to prevent blurriness?
Still, Other Brand Products are expensive;
View detail
Well made but looks dull.
The detail and rim construction was good.
I would have liked to have had a little more surface sharpening.
View detail
Buy just in case
I bought it to use when the balance is bad and vibration occurs because it is a Tire hand gummy, but I don't care about the vibration with Mini circuit because the speed is low, so I don't use it for now. View detail
Easy installation
I think the smooth surface will reduce drag. It is hard to tell which is more effective by replacing them at the same time, but I think the front one is more effective. View detail
Fits: YAMAHA DT200WR, YAMAHA DT230LANZA, YAMAHA TRICKER, YAMAHA TT250R, YAMAHA TT250R RAID, YAMAHA WR155R, YAMAHA XTZ125, YAMAHA XT250, YAMAHA SEROW250
TTR125LWE It's true, but...
Referring to other people's IMPRESSION
‘23I bought this for my TTR125LWE!
The product workmanship and installation itself,
It is a very good product with no problems at all!
It is not for TTR125.
it can't be helped
The width of the Brake Side from the vehicle body.
3 to 4 cm increase
Enduro, G650 XCOUNTRYetc.
We'll see if you care.
Not until I've used it.
In the absence of dedicated products,
Think of it as a Universal Product.
It's like, "Oh, well, that's okay.
View detail
It looks great but ………….
The plastic parts that receive the screws are not strong enough. I tightened the screws very carefully, but one of the plastic parts became stupid and kept turning round and round. It would be better if at least one screw and one spare part were included. I was also concerned about the fact that rainwater can get in much more than with the Normal packing. View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS
Less effective than Front
It is hard to feel the effect as much as Front.
So it would be more difficult to be a pivod.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS
The price is low, but...
The price is low, but I could see the effect as far as Front is concerned.
The Bearing contact surface of the surface plating was dented when I removed it.
I replaced it with a surface carbide-treated one instead of Plating.
That one has much better performance.
Rear also put vito on it but I can't see the effect.
View detail
Fits: HONDA SUPER CUB 50, HONDA MONKEY125, HONDA SUPER CUB110, HONDA SUPER CUBC125, HONDA glom, HONDA DAX125, HONDA SUPER CUBC125
Periodic replacement parts.
This is a replacement in conjunction with Sprocket replacement.
It is a recommendation because it is much cheaper than OEM and the quality is the same as OEM.
View detail
Fits: KAWASAKI Z1000 (water-cooled), KAWASAKI NINJA 1000
OHLINSRear suspension KA010
Immediately after purchase, the oil leaked (about 300 kg). I sent the defective product back for replacement, but it was only repaired. I asked them to exchange it for a new one if I had the same symptoms again, but they said that the quality was better than a new one and that the finish was reliable. I had the feeling that they were selling a long-term stock or an inferior product at a low price. I drove the car about 200 kilometers after that and had no problems. I felt that Webig is not a very good company to deal with. View detail
Fits: YAMAHA YZF-R25, YAMAHA MT-07, YAMAHA MT-25, YAMAHA MT03
Addition of adjustment functions
I purchased this product to add pre-road adjustment to my MT07.
I purchased the Black and after a few installations, I was able to get it to work.
The Anodized peeling will reveal the underlying Silver.
I think Silver is a safe bet.
By the way, it is a little larger than OEM caps.
Pre-road hangs about 3mm even if it is installed as is.
View detail
Fits: YAMAHA XSR900, YAMAHA MT-09 Tracer, YAMAHA TRACER900, YAMAHA TRACER900
Easy install, must have addition - however mine was faulty
About quality and texture - Great OEM product About the feeling of use - Works as expected. Products to buy together - none Difficulty of installation - very easy max 30 min Cost performance and comparison with other products - Reliability issues / faulty after 4 months use About shipping and packaging - shipping was perfect. installed this July last year, the install was smooth and easy. The quickshifter is great, although a bit "janky" at certain rev ranges. All in a all a great addition to the bike, A must have in my opinion. Although before entering winter storage last year I started getting intermittent failures. (where the quickshift function stopped working) After a week or so with this issue, the actual quickshift function stopped working completely, even though it's displayed in the dashboard. Read online the gyroscope/sensor in the unit has a tendency to be a bit sensitive to water. I ride in all conditions except during winter months. I tried initiating RMA process, but I've given up. and will most likely end up just ordering a new unit. View detail
Fits: HONDA CRF250L, HONDA CRF250L S, HONDA CRF250RALLY, HONDA CRF250RALLY S
Easy to use
A little pricey, but it seems solid!
I'm afraid I'll fall off-road and break it, but it does look better! Installation was a breeze, even for a novice!
View detail
Front wheel
Used as front wheel on my MONKEY, and I love that I don't even have to Center it out with GCraft's Disc Hub!
But color-wise, it doesn't have the shine of the Anodized? I'm thinking of taking the plunge and Buffing it up later…
View detail
Fits: HONDA SUPER CUBC125, HONDA CROSSCUB110, HONDA CT125CT110 HUNTER CUB, HONDA SUPER CUBC125
CT125for Front as
I replaced it somehow.
I can't feel the effect when driving, but I guess it's a matter of feeling.
The color is black, so it is recommended for dress-up purposes.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS CAFE
no problem
I am not satisfied because the upper is MORIWAKI. If possible, I would like to use the same brand. View detail
Fits: HONDA CB400SF Revo, HONDA CB400Super BOLDOR Revo
There are some concerns, but Fashion Fat at One Point
What I received was just like the Image!
One point as listed and good in Fashion.
I would recommend this product to others. However, I do have some concerns.
I'm personally satisfied with K-FAC's Parts, but...
When I opened the package to install it, I was surprised to find large scratches and unevenness. I installed it in a place where I couldn't see it.
I like the Manufacturer and plan to buy from them in the future, but I am wondering if there is any inspection before shipping? I am very worried and anxious.
Well, it is not expensive, so it is unavoidable.
View detail
Fits: YAMAHA Drag Star (DRUG STAR), YAMAHA TRICKER (XG250 TRICKER), YAMAHA Drag Star (DRUG STAR), YAMAHA TRICKER (XG250 TRICKER), YAMAHA TRICKER (XG250 TRICKER), YAMAHA SEROW250 (SEROW), YAMAHA SEROW250 (SEROW), YAMAHA XT250X, YAMAHA TRICKER (XG250 TRICKER), YAMAHA Drag Star (DRUG STAR), YAMAHA TRICKER (XG250 TRICKER), YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SEROW250 (SEROW), YAMAHA SR400, YAMAHA Drag Star (DRUG STAR), YAMAHA XT250X, YAMAHA Drag Star (DRUG STAR)
Works fine.
OEM looks SMART and effective, but modestly priced.
This one is not as good as it looks, but it serves as a Dust Seal, so I don't think it's a problem.
It seems to be rather durable as well.
There is only one, so you need to buy two.
View detail