Reviews
Ride quality has changed drastically!
I was tired of the fluffy ride characteristic of OEM and finally replaced them with new ones! I am smiling to myself in the helmet because I can turn the curves on the mountain pass with a good feeling every time I make a turn! Once you install it, you will never go back to OEM suspension! View detail
Fits: HONDA SUPER CUB70, HONDA SUPER CUB 50, HONDA SUPER CUB 90, HONDA CUB PRESS, HONDA LITTLE CUB
Ride is hard
Used with HA02 SUPER CUB 90. The ride is firm, adjustable in 5 levels, and even at the weakest setting, the damper is effective and picks up bumps on the road surface. The Spring setting is firmer than the OEM, but I think it is standard. However, I have lower back pain and it came back after only a few kilometers. Therefore, I prefer the softer OEM setting for my lower back.
The OEM has no offset between the Upper Mount and Lower Mount, but BlackShock has the Lower Mount offset inward by a little less than 1 cm. Therefore, the Rubber Bush inside the Mount absorbs some of the distortion and is used for mounting.
View detail
Fits: HONDA SUPER CUB70, HONDA SUPER CUB 50, HONDA SUPER CUB 90, HONDA CUB PRESS, HONDA LITTLE CUB
Better than expected.
Purchased to eliminate bottoming out and fluffiness of Normal suspension.
I am satisfied with the fast convergence of the behavior when passing through the Gap, while it holds firm at the Corner.
View detail
Significantly more effective when loaded
I bought this because the OEM Rear suspension on my JA45 bounces around with the slightest gap. I bought it because the OEM rear suspension was bouncing around with a little bit of gap.
When tested in city driving with an empty load, the damping is clearly more effective than OEM, and the bouncing is easily contained. I also feel that the ride height is slightly higher, making it easier to ride.
The true value is when loaded with a large amount of gear. When we went mountaineering and camping touring to remote islands, we drove more than 350 km one way with a full load of climbing and camping gear. In comparison, with this suspension (at the hardest pre-road setting), the rear wheels felt stable with almost no sinkage, and the car was very nimble without feeling the weight of the luggage. It is well worth buying.
View detail
Fits: HONDA SUPER CUB70, HONDA SUPER CUB 50, HONDA SUPER CUB 90, HONDA CUB PRESS, HONDA LITTLE CUB
HA06 SUPER CUB 100 (CUB100 THAI)
I was able to go with a HA06 SUPER CUB 100 with a pontoon.
I also used the impressions here to help me with my purchase, so I'm posting to return the favor. I believe the free length is 330mm and the top and bottom collars are M14. Compared to the NORMAL, I feel that the road-following and comfort performance is much better. The 5-step Pre-road is also available.
View detail
Fits: HONDA Super Cub 50 Custom, HONDA Super Cub 70, HONDA Super Cub 70, HONDA Super Cub 90, HONDA Super Cub 90, HONDA Super Cub 50 Custom, HONDA little cub, HONDA Super Cub 50 Custom, HONDA little cub
It is easy to operate.
Easy to install and easy to operate. This is my second order. It is inexpensive and very helpful. View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB110
Normal good
I rode Motorcycle NORMAL and I am a beginner, so I don't really know how it rides. I have been looking for a hard one for a tandem, and I found that a hard one is better, so I decided to go with this one that I can adjust.
I am glad I installed it because it is easy to replace and adjust.
Since Front is NORMAL, I can't help but wonder if I should change this one too!
I don't know about durability yet, but I hope it will be helpful.
View detail
Fits: HONDA CROSSCUB [Crosscub]., HONDA CROSSCUB [Crosscub].
It is not attached to JA60.
[How is it used?
It could not be installed on the current CROSS CUB due to lack of confirmation.
Was the one you received as per Image?
It's a shame because I was looking forward to it.
Was the installation difficult?
Bolt one replacement is possible with a single Bolt.
How was your experience with it?
It didn't work. (Lol)
I ended up installing Endurance's EM247K88A1.
The heel side is missing, so it is a toe-only operation, but this was a good thing because it looks clean.
View detail
Fits: HONDA CROSSCUB [Crosscub]., HONDA CROSSCUB [Crosscub].
CROSS CUBSportsPedal
Installed on a JA10CROSS CUB. Installation is easy by removing the footpeg.
I have been running for a while, and I can go up and down with just my toes, so I cut off the back half of the shoe and use it.
As a result, the foot can be changed without shifting the foot from the foot, allowing for a stable ride.
The Touring is now more comfortable than ever, and I'm glad I made the change.
The reason I cut the back side is because it hits the heel of the shoe while running.
It was in the way.
View detail
Fits: HONDA CROSSCUB [Crosscub]., HONDA CROSSCUB [Crosscub].
The method of operation changes
Downshift can be done by lifting the toes instead of Downshifting with the heel.
The Lever on the front side is a little longer, so there is more Stroke when shifting GEAR.
The rear side is shortened on the forehead, which makes the operation with the heel reasonably heavy, and the operation with the heel is also subtle because it is closer to the body side. It was easier to operate with the toes.
When replacing, loosen the footpeg until it rattles.
I set mine 1Notch higher and installed it.
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB110
I think it's good.
I replaced my JA44 OEM suspension with this one, and it feels a bit softer than the OEM one, which I didn't like the lumpy thrust of the OEM one. It is not so much a drastic change, but I am happy with the replacement. View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB110
It tightens up the suspension!
I bought it after reading your Review and youtube video.
I didn't have high expectations because of the low price, but when I installed it and tried it out, I felt unintentionally good as soon as I sat down.
I weigh 78 kg and I have adjusted the weight from the softest to the hardest side.
The rear damping is now working and the ride quality is great, and touring with friends is a lot of fun.
View detail
It was also attached to JA10CROSS CUB.
This product was attached to JA10CROSS CUB.
This time, it was installed on a JA55 CT125.
The length is about 1 cm longer than the CT125 OEMRear suspension.
The ride is very comfortable.
Long distance is easy.
Sticky and stable on forest roads, etc.
There are few launches.
We recommend it cosmetically.
View detail
Black is cool.
I bought it because it had a good rating.
It looks cool in Black.
The ride can also be adjusted, so it is a recommendation.
It was the right thing to buy
View detail
Fits: HONDA LITTLE CUB, HONDA SUPER CUB 90 CM, HONDA SUPER CUB 90 DX, HONDA SUPER CUB 90 STD, HONDA SUPER CUB70 CM, HONDA SUPER CUB70 DX, HONDA SUPER CUB70 STD, HONDA CUB PRESS, HONDA SUPER CUB 50 CM, HONDA SUPER CUB 50 DX, HONDA SUPER CUB 50 STD
Rear Shock Full Plated tokyodo
He bought the Honda Little Cub. I wasn't comfortable with the situation at the factory stands:
1) sipping - initially the small clearance became even smaller when boarding the moped;
2) swing - in motion the moped was very unstable.
Tokyodo stands enjoyed their quality, the presence of a key for adjustment and the most enjoyable moment - an excellent price. Installation and setup took 15 minutes. The presence of the key helped expose the necessary rigidity at once. Unfortunately, there is no possibility to test in traffic at the moment due to the bad weather, but in static everything is already very good. Definitely recommend!
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB110
Cheap but good performance
Since GORILLA has Long Swing Arm, I replaced it with a used rear suspension for CUB, and the size is just right and the ride quality has improved! The design looks good from a distance, but up close, the plastic part looks cheap. Adjusting the damping by twisting the suspension body is easy. Just insert the rod into the hole and turn it. I set it to the hardest setting, and it has a good bite. View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUB 50
It will be attached to JA59.
I wasn't sure if it would fit, but I was able to install it on my JA59.
As you say, OEM feet get fluffy…
With this Shock, I think I finally have a normal suspension. It is neither too sporty nor too soft. It is neither too sporty nor too soft.
It is inexpensive and the installation only requires attaching and detaching four Nuts, so if you are concerned about OEMs, give it a try.
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB110
Improved ride quality
Replaced to deal with OEM fluffiness.
I think the ride quality and stability have increased.
View detail
Fits: HONDA SUPER CUB70, HONDA SUPER CUB 50, HONDA SUPER CUB 90, HONDA CUB PRESS, HONDA LITTLE CUB
Also available in Race
[How is it used?
I bought it because the rear shock of my SUPER CUB, which goes out to Race on snow, was disconnected.
Was the one you received as per Image?
It was more solid than I expected.
Was the installation difficult?
It's not difficult.
Can be installed by anyone who can loosen and tighten Nut
How was your experience with it?
I would like to have more Stroke when I think about using it in Race, but I think the costuming is very good.
A light Jump would be flyable.
I can't say for sure since it is a replacement from the missing suspension, but I have the impression that SlideControl has become easier.
[Included Parts:were they on?
Hook wrench for pre-road adjustment, Instruction Manual, and Sticker were included.
[Was there anything that disappointed you?
That it was broken after only 2Race when it was rammed by another Motorcycle.
I know this is unexpected from Manufacturer's point of view, lol.
View detail
Driving will change.
I use a CUB110 (JA07) for commuting to work, but even on seemingly flat paved roads, it would bob up and down, and at intersections and other turns, it felt like it was going to fall apart, so I switched to a Tokyo Do rear shock, which is MAJOR for a CUB.
I have not made any settings, but the behavior has clearly changed.
I will make adjustments as I go along and change it to my liking.
Installation is easy, just remove the OEM and pop it on.
JA07 don't forget to put in the two washers that come with it!
View detail