Reviews
Fits: YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400
SR.
I changed it because I was concerned about the vibration of the footpeg.
The Left Side cannot be replaced without removing the Swing Arm.
After replacement, vibration was reduced.
View detail
Fits: HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA CROSS CUB50
ShininglyMaterial:Stainless Steel
The screw thread of the Chain Adjuster was stretched and felt stuck, so I purchased a Posh product from Other Brand Product instead of OEM.
Adjuster part is longer than OEM, but it is easy to replace.
Shiningly shining Stainless Steel is a nice touch.
Chain is small, so check it often and tighten it at the proper torque.
View detail
Fits: HONDA SUPER CUB 110, HONDA CROSS CUB, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA CROSS CUB 110
The price is reasonable and it is worth trying it on.
I have just installed it, so I need to run it for a while to see if it is an actual effect or just the Brush-bo effect, but it sure seems to be able to change tightly. It is not expensive, so I think it is worth trying.
Installation is easy
View detail
Pretty good
Installed on Z900RSNormal swing arm.
This is a good choice for those who want to black out their feet while keeping the normal swing arm. (,,> <,,)
It's not a complete blackification since ASKULShaft and Hub bolt are Silver, but if you look closely Oh!" I am very satisfied with the quality of the food.
View detail
Fits: HONDA SUPER CUB 110, HONDA CROSS CUB, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA CROSS CUB 110
Change rodSupport
There was also an Installation Instruction Manual, so I think this is a friendly product. It took about 20 minutes to complete the work.
My impression of its use is not good.
There is a sense of being able to firmly Shift change.
I think it could be a little cheaper.
View detail
Fits: HONDA SUPER CUB 110, HONDA CROSS CUB, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA CROSS CUB 110
I feel the effect.
The CUB has a long change rod, and we were concerned about damage to the oil seal caused by the change.
An 8mm box is sufficient for the work, but a Universal joint might be useful since the footpeg gets in the way. I forced myself to turn it with Extension.
I also put some grease on it to prevent some of the wear.
View detail
Fits: YAMAHA TZM50, YAMAHA RZ50, HONDA NS-1, HONDA NSR50, HONDA NSR80, HONDA NS-1, HONDA NSR50, HONDA NSR80
You can make it as long as you like.
It can be adjusted to the desired length.
The rubber part of the Shift is a little hard and slippery, so if you are used to OEM rubber or do not like the slippery feeling, you should take countermeasures.
View detail
Fits: HONDA SUPER CUB110, HONDA SUPER CUB 110, HONDA SUPER CUB110, HONDA CROSS CUB, HONDA CROSSCUB110
Satisfied
Installation was not difficult and only took a little time to adjust the position of the removed pedal. Is the effect self-satisfying? I think it's more solid than the original. The price is reasonable and I am glad I bought this product. I am satisfied with the beautiful workmanship. View detail
Fits: HONDA SUPER CUB110, HONDA SUPER CUB 110, HONDA SUPER CUB110, HONDA CROSS CUB, HONDA CROSSCUB110
For GEAR loss prevention
I bought this to prevent the GEAR from slipping out, which is a common problem with CUBs. If you have a Ratchet deep socket, you can install it right away. View detail
Exactly！！
I bought this for my SUPER CUB 50, it is a replacement because the OEM broke, but I think this one is better. View detail
Minimoto's CircuitSpec.
I used it to turn my DR-Z70 into a mini circuit, and of course it works with the DR-Z50 from KidsforRace.
For GCraft's MONKEY/GORILLA Footpeg Agaru-kun The combination of the two. It is about 30mm above and 30mm behind and is Exactly as Rear Sets. footpeg is basically gone. It is good.
View detail
Fits: HONDA SUPER CUB 110, HONDA CROSS CUB, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA CROSS CUB 110
Dramatic exchange to Smooth GyaChange
Installed on a 2016 CROSS CUBJA10 model.
After adjusting the clutch by myself, I found that the gear was too heavy to enter and I had to adjust it many times, but sometimes it became hard, so I bought Change rodSupport.
Although I have only been driving for one day after installing the Change rodSupport, frequent gear change operations in town driving are so nice that I feel as if I have never been in the car before.
The support was installed by loosening the 4 bolts on the main stand and lowering the stand to loosen and tighten the bolts in the DriverBox.
I think the effect of this Change rodSupport is immensely Large.
View detail
Fits: HONDA SUPER CUB110, HONDA SUPER CUB 110, HONDA SUPER CUB110, HONDA CROSS CUB, HONDA CROSSCUB110
Very good feeling
It inhance supercub's gear shift feeling and stability a lot. Easy and quick installation. I super recommand this parts to every supercub110 riders. View detail
Necessary parts for minibike racing
MINI bike racing is booming around me right now, and I myself bought an NSR80. nsr80 is very complete in its original form, and I didn't feel that I needed to change any parts in particular. However, as I progressed, I began to rub the footpegs, so I purchased this product. The quality is sufficient for my needs. View detail
Fits: HONDA NS-1, HONDA NSR50, HONDA NSR50mini, HONDA NSR80, HONDA NS-1, HONDA NSR50, HONDA NSR50mini, HONDA NSR80
To prevent bending in a fall.
I bought this to protect my Change rod that I bent once in a fall.
And as an added bonus, better Shift feeling!
View detail
Fits: HONDA SUPER CUB110, HONDA SUPER CUB 110, HONDA SUPER CUB110, HONDA CROSS CUB, HONDA CROSSCUB110
Gear changing can be fun!
GEAR is now noticeably less likely to shoot blanks, and SHIFT UP after stopping in 4th gear often did not enter Neutral, but now it can almost always be changed.
Also, the sound and feel of the Gear changing has become solid, and the Downshift in particular is very comfortable. and especially Downshift is now very comfortable.
The cospa is quite good and I recommend it.
View detail
Fits: HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 70, HONDA Super Cub 90, HONDA little cub
Replaced with Tire Replacement
The Super Cub custom had over 60,000 km on it and at the last tire replacement, the dust seal was coiled, so the bearing was replaced as well. View detail
Fits: HONDA SUPER CUB110, HONDA SUPER CUB 110, HONDA SUPER CUB110, HONDA CROSS CUB, HONDA CROSSCUB110
better to have something than nothing
Just pull out the Shift Pedal and install it.
Parts that I even wish to have on OEM any longer.
Shift Pedal is not shaky, so the texture is improved at once.
I wanted Black, but only Gold was available, so I painted it myself.
Well, it's not in a position where I can usually see it.
View detail
Fits: HONDA SUPER CUB 110, HONDA CROSS CUB, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA CROSS CUB 110
The evaluation after installation of Change rodSupport
Change rodSupport was exactly what I expected. I am satisfied with the product. View detail
Fits: HONDA SUPER CUB110, HONDA SUPER CUB 110, HONDA SUPER CUB110, HONDA CROSS CUB, HONDA CROSSCUB110
good
Shift change of SUPER CUB is now Snap. View detail