Reviews
No different than OEMs
Purchased due to leaking oil line. I am glad that the quality is the same as OEM and the price is lower. I will buy again when it breaks. View detail
Genuine Continental Fuel Hose
I do have a lot of bikes come in with really bad fuel lines for one reason or another and I always like to have some of this hanging around for just this reason. One bike in particular had the original stock line which was far from good and this bike was literally a few years old, 2020. Really rigid line was replaced with this. I do like Continental fuel hose as it is proven to work exactly as it should and not be too rigid but also has enough flex to be abnle to loop around weird placements. This was well priced from Webike and they also packed my order with great care so not to damage or bend this hose where it should not be bent. It came as a nice loop.The flexibility is excellent. A really nice fit to the clamp fitment too. Very pleased, thanks Webike. View detail
As fuel pump piping in Fuel Tank
I bought a battered 900SS (900SL) and am Restore.
DUCATI features a fuel pump built into the tank, and the rubber hose connects the fuel pump to the piping in the tank that goes to the fuel cock.
I was going to use AN-BU cloth-wrapped hose, but when I soaked it in Gasoline as an experiment, I discovered that the adhesive-like paint that holds the cloth in place was being attacked, so I decided to use this high-performance hose.
As you have already noted, the quality of the Hose is superior to other Hoses.
Fuel Hoses sold by top brands such as DAYTONA, KITACO, and Posh are of course safe to use and do not easily crack over time as inferior Hoses do.
Therefore, for ordinary use, those hoses that are easily available will suffice.
However, if they are used as they are for years, or if they are used in such harsh places as tight bending, passing through places with great heat, or constantly exposed to direct sunlight, they tend to become Pushing stiff.
When you go there, this Hose is different.
It is the same hose that EuropeManufacturer uses in the engine room of a car, and we know from experience that it does not lose its flexibility even in the toughest conditions.
In any case, the quality is not hampered.
I used AN-BU's cloth-wrapped hose for the parts visible through the gaps in the Frame for visual appeal, but if there is no such reason, it is best to use this hose for all of them.
At least the Trouble caused by Fuel Hose should be wiped out.
View detail
Fits: HARLEY-DAVIDSON OEMGas tanks for cars with -75:Various types of gas tanks with 3/8-NPTSize cook opening
It was nice!
For now, there are no Gasoline leaks!
I don't know how long it will last!
Feels good to use!
View detail
Fits: HARLEY-DAVIDSON Universal
Millimeter but dare InchHose
When I installed an oil cooler on my XR250 using a universal type hose, I used a cloth mesh hose that I had on hand and when I installed it, the hose on the side where the OEM pipe was cut slipped out and I had a terrible time.
So I looked into using a stainless mesh hose that is close to the exhaust pipe, heat resistant, low expansion, and reasonably priced.
The Hose is pretty tight to install, but I looked at it with Idling for 30 minutes and this time it was Large sturdy.
Now we will be able to go out for a real test run.
It also fits tightly into the M8Banjo.
If you measure and buy in the length you need, you can use it without waste.
View detail
Fits: HARLEY-DAVIDSON Mainly used for oil lines.
Fuel line, this is the only choice.
Don't use hose, which is quickly altered by UV light, heat, and fuel, and should be replaced when it leaves a clear mark on the clamp. It is still convenient, although there are few opportunities for immediate delivery at Webig due to the spec. on the order. View detail
Fuel fliter
I bought this because I frequently get Garbage in my carburetor and it clogs up frequently! 。
The installation was easy and the filtration was good.
View detail
Different sizes
I purchased a different size, but this is the only one I would choose for Fuel Hose.
Products less expensive than this have low weather resistance and may harden or tear, so if reliability is important, high-end products should be used.
This probably will not deteriorate and tear in about 10 years.
View detail
Thicker than OEM
Cannot pass through hole in Crankcase, making it unusable. View detail
Fits: HARLEY-DAVIDSON OEM gas tanks up to '75 (various gas tanks with 3/8-NPTSize cook opening)
It's upscale, but I think it's worth it.
Parts supply for Z-series OEM negative pressure cooks is no longer available, and Adapter for PinGel (Offset) It was installed together with
Seal tape for mounting (It is a Large thing how to roll and incorporate) and Liquid Gasket just in case. (It is a Large thing how to paint) The company also used a combination of the two.
I waited overnight for it to dry, put in Gasoline, and I think it installed perfectly with no seepage.
The Cook is a Small Type and does not interfere with the CRcarburetor, and the Fuel Hose with a 7 pi inside diameter was just right.
The click feeling of the Snap function at On, Off, and Reserve is unique and easy to understand, even when driving.
I chose Brass, which has no surface treatment, but it will shine if polished, and I think I can enjoy the change over time as it is.
The Instruction Manual included an exploded view, but I could not figure out how to disassemble it, and it would be helpful to have a supply of consumable parts.
View detail
Fits: HARLEY-DAVIDSON Various types of Gas tanks with 1/4-NPTSize Cook mounting opening
ได้รับแล้วนะครับ ถูกต้องครบถ้วนตรงตามที่สั่ง สินค้า ดีและมีคุณภาพ คุ้มค่าคุ้มราคาครับผม การให้บริการ จากร้านค้าดี โอกาสหน้าจะมาซื้ออีกครับ View detail
Durable
Vinyl is thick and has excellent oil and heat resistance, so it can be used in a variety of ways.
I use it for the fuel line and I can see the gasoline flowing into the rear hose and feel like I am customizing it. [Color] I'm glad it was Clear.
View detail
Durability.
The vinyl is thick and has excellent oil and heat resistance, so it can be used in a variety of ways. [Color] It was a good decision to go with Clear. View detail
I'm happy with the way it looks.
The price is very reasonable, but it looks very good, and when you put on the Filter, the custom feeling goes up considerably. [Color] Clear's Fuel hose and Skeleton's Fuel filter Matching are my personal favorites. View detail
Fits: HARLEY-DAVIDSON Cars with OEMTank 75- (excludes Injection vehicles):Various Gas tanks with 21mm Nut connection type of Cook attachment opening
It feels good.
Snap and stop at each position of on off res, the operation feeling is very good. View detail
It can be disassembled and cleaned so it can be used repeatedly.
Until now, Material:I used Plastic's Disposable Type.
The size of the Filter is Compact, so I was able to install it with CRcarburetor and K&N Filter without any trouble. I disassembled the filter to check the water penetration after driving in the rain, but it was a good feeling because the structure is simple.
View detail
Fits: HARLEY-DAVIDSON OEM gas tanks up to the '75 model year (except for various gas tanks with a 22mm Nut connection type Cook attachment opening *Injection cars)
It's got a Retro feel to it.
This Fuel Cock has a very nice atmosphere and Retro feel with the look and feel of the texture and dull color. The quality is good and safe to use and the Lever is easy to use and has a good SnapSnap and a solid sense of moderation. View detail
Fits: HARLEY-DAVIDSON Cars with OEMTank 75- (excludes Injection vehicles):Various Gas tanks with 21mm Nut connection type of Cook attachment opening
The operation feeling is good.
The operation feeling is comfortable because it stops with Snap in each position. What about the durability?
This is the effect from ShovelOEM, but it is Simple and looks good!
View detail
Fits: HARLEY-DAVIDSON Mainly used for oil lines.
Reasonably flexible, easy to use!
I used it for the line of Oil cooler, and it has moderate flexibility.
Some of the hoes in the USA are hard, and some of the hoes in the US are large and odd to get around.
I will. I don't know how durable it is yet, but I'm hoping it's a manufacturer's product.
ContiNeBarrel is a GermanyManufacturer. It is a little expensive...
View detail
Fits: HARLEY-DAVIDSON Universal
Used to replace the Reservoir Tank Hose on the EvoFLSTC HERITAGE SOFTAIL CLASSIC Rear master
I used this Hose to replace the Reservoir Tank Hose of Harley's EvoFLSTC HERITAGE SOFTAIL CLASSIC and Rear master. fluid was seeping from the joint of the Reserver tank and Hose, and I thought about retightening the Band, but Because I thought that the Hose was also aging, I used this Hose and exchanged it. When the Hose was too soft, it was crushed when it was bent, but this Hose was moderately hard and it was convenient for the purpose of this use. The hose clamp is also NeoFACTORY's product (item number:003032). I bought 50cm clamp to have enough room, but 40cm was enough for my car. View detail