Reviews
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
There was a Gasoline leak.
Previously, I bought it from another company and it was leaking after about 5 years.
I have been driving MONKEY for about 13 years and this was the third time I had to replace it.
View detail
Fits: HONDA Shirley 50.
CHALY s Cook was broken.
CHALY I purchased this product because the Cook of Last time I had another CHALY I purchased this product in the first place and had no problems at all, so I purchased it again. View detail
Fits: HONDA MONKEY, HONDA MONKEY
The direction of removal is ….
[How is it used?
SpiDer125 OEMCook is broken and is on Replace
Since it is not easy to find a cook for M12 female thread installation….
Was the one you received as per Image?
main idea
Was the installation difficult?
There is nothing difficult about it, but you need to be careful around fuel.
How was your experience with it?
Phi;8 is Overspecified for SpiDer125
[Included Parts:were they on?
Hose and Clip with I.D.Φ8, StrainerNet was included, which could not be installed as it is because the diameter of the end does not match!
[Was there anything that disappointed you?
The panelParts on the front of the Cook are not Screws but Rivet?
The SpiDerOEM is right, whereas the SpiDerOEM is left, so the Fuel Hose is a little more difficult to handle.
When the transparent hose is turned around at a steep angle, it breaks, so I use a hose with an inner diameter of Φ8 and an outer diameter of Φ8 with an inner diameter of Φ5.
View detail
Fits: HONDA APE 100, HONDA APE 50, HONDA MONKEY, HONDA MONKEY, HONDA APE 100, HONDA BENLY50CD90, HONDA BENLY90 S, HONDA GORILLA, HONDA GORILLA, HONDA CUB-based Engine CL, HONDA CUB Engine CD
Fuel Cock M14
It is a product with good quality and texture information There is no difference in the feeling of use from the std products It's easy to install Cost performance and comparison with other products are cheaper than std products WeBike packaging is always great, arriving in a week for delivery and packaging Purchasing concerns, precautions, or advice The rubber packing may be damaged if tightened at too high torque. It should be tightened to meet specifications View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Pink Glamorous Fuel hose
I bought myself a pink transparent hose. I liked it because it is transparent and pink - you can control the availability of fuel in the system, and the pink color gives charm to the motorcycle. Hose dimensions: outer diameter 7 mm, inner diameter 4 mm. I bought myself a pink transparent hose. I liked it because it is transparent and pink - you can control the presence of fuel in the system, and the pink color gives charm to the motorcycle. Hose dimensions: outer diameter 7 mm, inner diameter 4 mm. View detail
MONKEYFuel Cock
I was not sure about the size of my cookie, but I am glad that it is Exactly. View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA
Way bigger than stock
When receiving this fuel petcock I had no idea how much bigger you could go until I seen it.flows more fuel and perfect for my zongshen 190cc engine View detail
Fits: HONDA APE 100, HONDA APE 50, HONDA MONKEY, HONDA MONKEY, HONDA APE 100, HONDA BENLY50CD90, HONDA BENLY90 S, HONDA GORILLA, HONDA GORILLA, HONDA CUB-based Engine CL, HONDA CUB Engine CD
tl50 isn't in the fit, but it's perfect!
I thought, "tl50 is not compatible, but it's a Honda, so if the screw diameter is right, it will fit! I half gambled and bought it!
The diameter of the Fuel Cock section of the tl50 is 14mm.
This is the same APE Tank I used to tinker with, so I knew it would probably get there!
If you measure the screw diameter with Caliper, I bet you can use it for the most part.
Motorcycles over 40 years old are amazing! The packing of the Fuel Cock is so chica like plastic and not even half of it is left!
Good thing Packing was planning to change everything.
I'm afraid of Gasoline leakage if I run like this.
It can't be!
Comparison with OEM
OEM is easy to understand because On, Off, and Reserve are written in letters.
I know this item, Off, because only one notation (circled) is different!
But On, is Reserve a pictorial notation? Pictographs?
I don't know what to look for in such a Дﾟ Mark…
You have to remember intuitively where the cook twists!
The plastic tube like a filter is attached to the top of the Fuel Cock. However, when I installed it on my tl50, it would not fit in the tank with this Filter attached, so I had to pull the Filter out and leave the tube inside!
View detail
Looks like they're improving. (^^) Used for 4lInitial Model
I didn't like the Cook on the bottom out and ended up here.
First. RES-OFF-ON." is strange! I have heard that the display of "☆" is strange, but it seems to have been improved, and the one I purchased had the characters in the display. The image is also before the replacement.
I had no problem installing and using it. The switching operation is also well done, and I personally do not feel that it is cheap, etc.
Incidentally, I did a rose before installation, and the internal packing is also in line with the OEM, so I am not worried about the after installation.
I was curious.
There is a BALI at the Cock outlet and the inside diameter is narrow. The intake port at the time of ON is narrow and it seems to be hard for fuel to fall out. The mesh part of the Strainer is high, so fuel may remain.
Right. Well, as far as the others' are concerned, I guess there is no problem….
View detail
I appreciate the ReserveCook.
There is no Reserve in RigidMONKEY or 4LMONKEY's Normal cook.
In the past, I had to go to the trouble of replacing the cook's mounting part with M14 to install a cook with reserve, but this cook can be installed as is, which is a big help.
Especially in the case of 4L, the normal cook is downstream, so if the carburetor is PC20 etc., it will interfere with the cook.
However, this Cook is a Right out, so I'm going to make that point. [Color] You can Clear.
I don't have any problems with installation or usability, but I don't like the fact that Packing is so poor.
Gasoline may leak if it is tightened a little too much.
Nevertheless, I appreciate ReserveCook.
View detail
Fits: HONDA BENLY50CD50, HONDA APE 50, HONDA MONKEY
Caution.
Purchased for HISATank for nsr50. At first it was good with no initial defects, but I took it off and stored it to repaint the tank. I asked a friend of mine who is familiar with motorcycles to take a look at it, and he said that the rubber packing inside was deflated by the gasoline when it was first used. I asked a friend who knows about motorcycles to look into it, and he said that the rubber packing inside had probably swelled up with gasoline when it was first used, and when it was removed and stored, it shrank more than when it was shipped. I ended up having to buy a new one. This was the first time I had ever had a cook that became unusable once the Gasoline was removed. View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Gasoline Hose
About quality and texture be well-organized Hose and clip About the feeling of use Takegawa High Flow Fuel Cock does not fit well with standard products, but the hose did not feel durable Products to buy together hose clip Difficulty of installation easy , simple Cost performance and comparison with other products It feels similar compared to other hoses. It's not much different, but it's cost-effective About shipping and packaging It took a week and the packaging is great Any concerns, cautions, or advice when purchasing I tried to change the hose line because the oil tank was old and foreign substances came out, but the internal diameter of the SPTAKEGAWA High Flow Fuel Cock did not fit, so I will leave it as a spare and use it to replace the vaporizer hose View detail
Installed on CL50!
Installed on a CL50.
I was looking for a hose inner diameter of 4mm and found the Minimoto Fuel Filter, so I bought it.
The size was also small, so the installation went well.
It would have been better if the Hose Band was included.
I am satisfied with the low price.
View detail
There is a fatal flaw.
Do not buy this product.
[How is it used?
I bought this for the purpose of using only the inside rubber packing on my old Restore car.
Was the one you received as per Image?
The dimensions were exactly as I expected.
However, the casting surface is quite dirty, so it looks like they are still using very old molds.
How was your experience with it?
When we disassembled it to remove the packing, we found a protrusion in the Cook's channel switching area due to a chipped mold, which prevented the packing from working and allowed gasoline to leak out.
Since it is not a Wound but a chipped mold, it is assumed that all items manufactured with this mold are defective.
If used unnoticed, gasoline may leak and cause a vehicle fire.
I'm sorry, but you can't buy it.
For the Manufacturer
I thought it would be a good idea to have a minimum level of quality control.
If a vehicle fire were to occur, it would be a disaster.
View detail
Small is good.
I installed it on my CUB and it was very small so it didn't take up much space.
The Filter is now installed and I feel more secure.
View detail
Fits: HONDA APE 100, HONDA APE 50, HONDA MONKEY, HONDA MONKEY, HONDA APE 100, HONDA BENLY50CD90, HONDA BENLY90 S, HONDA GORILLA, HONDA GORILLA, HONDA CUB-based Engine CL, HONDA CUB Engine CD
Enough if you don't care about OEM.
If you don't mind that, you can buy it for 1/3 of the price of OEM Parts. It's not leaking and it's very durable, but it's not as good as the OEM Cook Parts. View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
It leaked.
It started leaking 2 months after purchase. If it is bad, it will be a vehicle fire. I would like to have it replaced or returned Gold. View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
It feels good!
I drove 3000km and the durability seems to be good. View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
It'll turn off properly.
I decided to replace the Cook on my Chinese Tank for GORILLA (Modern XX) because it was leaking fuel little by little even in the OFF position.
I chose this product because my Chinese Tank was an M16Pitch 1.5 Screw.
After installation, I was pleased to find that no fuel came out with it off, no oozing or leaking.
View detail
Fits: HONDA Scar CUB LITTLE CUB
Simultaneous installation with PC20
[How is it used?
MINIMOTO's PC20 same SizeCarburetor (https://www.webike.net/sd/23872858/) I installed it at the same time as here.
This product is required because the CUB Cook is an integral part of the carburetor.
Was the one you received as per Image?
It's exactly what I thought it would be. It's just Bracket and Cook lol.
Was the installation difficult?
If you have 8mm Wrench, you can install it.
The Fuel Hose was also new at the same time. It had become stiff and the distance was slightly insufficient.
How was your experience with it?
The carburetor and Cook outlet interfere slightly, so I mounted it at an angle.
[Included Parts:were they on?
It comes with a hole and Tie Wrap. I think it's very clever.
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I think the item you should buy with it is Fuel Hose, let's Refresh it!
View detail