Reviews
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
There was a Gasoline leak.
Previously, I bought it from another company and it was leaking after about 5 years.
I have been driving MONKEY for about 13 years and this was the third time I had to replace it.
View detail
Fits: HONDA Shirley 50.
CHALY s Cook was broken.
CHALY I purchased this product because the Cook of Last time I had another CHALY I purchased this product in the first place and had no problems at all, so I purchased it again. View detail
Fits: HARLEY-DAVIDSON 1/2-inchesHose compatible
Used for Repair!
I replaced it because it was rusty and shabby; I've been using it for about a year now and I'm happy with it, especially since it hasn't rusted. View detail
Very convenient!
I purchased the Tank when reviving it after more than 10 years of neglect, as I had many opportunities to take it off and on.
In conclusion, when you detach and detach the hose of Gasoline, there is no dribble of Gasoline and no damage to the hose.
It is very convenient to remove Joint with one hand.
Motorcycles, which rarely have the opportunity to remove and install the tank, may also have hardened fuel hoses,
I am considering installing it on my other Motorcycle as it seems cost effective.
View detail
It's an old Motorcycle.
It is an old motorcycle so I installed it as a precaution. View detail
Used between Tank and FerCook in RENAISSA
The Lever is unexpectedly heavy, making it difficult to operate with one hand.
No fuel leaks or other problems have occurred, so it is ready for use.
View detail
![[Xess] (RZ250 / 350) Filter Set for Fuel Cock](https://img.webike-cdn.net/catalogue/images/2902/3-y-t_00017a_TS.jpg)
Fits: YAMAHA RZ250, YAMAHA RZ350, YAMAHA RZ250, YAMAHA RZ350
In reserve.
I think it is good that the length is adjustable! View detail
RZ250 Fuerre Hose replacement
When the RZ250's Fuel Hose routing was changed, the Hose was also replaced.
I have been using KIJIMA's Hose for some time.
The last time I replaced the hose, I used KITACO's hose because of its imechain and price, but the hose hardened unexpectedly quickly and was hard to work with when removing and reinstalling the hose.
I still value workability, so I returned to KIJIMA.
The hose is flexible and easy to work with. It is also nice that it does not harden easily.
Home center sells a similar Pink hose, but it is not similar to KIJIMA's.
I recommend KIJIMA's Hose, don't just jump on it because it is cheap.
The drawback is that it is too soft, and if the bending radius is too small or too much force is applied, the hose will bend.
Even if the motor is large and sturdy when installed, it may break due to vibration when the motorcycle is actually running, and if it does break, the fuel supply may not be able to keep up and the motor may stop without gas.
If you want to make small bends, you can use a two-layered black hose.
View detail
Used to replace Fuel Hose on GPZ900R.
The Hose connecting NINJA's Fuel Cock to the carburetor is hardened,
I started having trouble removing the Tank, so I replaced it.
The Fuel Hose that was originally attached was measured to be 7.5mm in inner diameter and 14mm in outer diameter.
Most of the Fuel Hose Spec. have an inner diameter of 8mm, and this product is the only one with an inner diameter of 7mm.
I was not sure, and when I checked the actual product at 0aps for the first time in a while, I found that the product Package
The GPZ900R was found in the list of compatible vehicles on the back.
I was relieved and exchanged this item for a new one.
I'm afraid there would be a lot of inconvenience if the standard and bore diameters were to change...
Yes, Hose clamp is a Quantity:2pc. Set included.
View detail
Fits: HONDA APE 100, HONDA APE 50, HONDA MONKEY, HONDA MONKEY, HONDA APE 100, HONDA BENLY50CD90, HONDA BENLY90 S, HONDA GORILLA, HONDA GORILLA, HONDA CUB-based Engine CL, HONDA CUB Engine CD
Fuel Cock M14
It is a product with good quality and texture information There is no difference in the feeling of use from the std products It's easy to install Cost performance and comparison with other products are cheaper than std products WeBike packaging is always great, arriving in a week for delivery and packaging Purchasing concerns, precautions, or advice The rubber packing may be damaged if tightened at too high torque. It should be tightened to meet specifications View detail
Fits: HONDA CUB-based Engine (CD), HONDA CUB-based Engine (CL), HONDA BENLY90 S, HONDA BENLY50CD90, HONDA MONKEY, HONDA APE 50, HONDA MONKEY, HONDA GORILLA, HONDA APE 100 TypeD, HONDA GORILLA, HONDA APE 100
Big Bore Carburetor (PC20)
Quality and texture information larger than std products big carbreter is definitely fuelled for its sense of use HOSELINE FOR PRODUCTS TO BUY WITH It's easy to install It provides a lot of fuel because it is larger than the cost performance and comparison with other products WeBike packaging is always great, arriving in a week for delivery and packaging When purchasing, it is recommended to make sure that the big carbreter is right for you in the items of concern, precautions, or advice. However, fuel efficiency may not be good because of too much fuel injection. The pc20/pe24 carbreter was not fuel efficient View detail
It is made by KIJIMA, so it is better than nothing.
[How is it used?
Used for Af09.
Was the one you received as per Image?
Yes
How was your experience with it?
It is made by KIJIMA, so it is better than nothing.
[Points to note]
I would recommend checking the Φnumber of Hose before purchasing.
How did it compare to other products?
Variation is also abundant, so I thought it should be made by KIJIMA….
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR)
Good and close to OEM. Would buy again.
Good and close to OEM. Would buy again. View detail
It is soft and easy to use.
It is a little thicker than Kawasaki OEM parts, but I felt no discomfort in wearing it. The length is different between No.1 and No.4. View detail
Foreign objects can be visually identified.
There was a sign of rust inside the Fuel Tank, so I installed it to check.
The high transparency and clear view of the interior made it easy to check for foreign objects.
I was worried about deformation due to heat, but there were no problems even after running around all day in mid-summer.
View detail
Convenient to have
I bought Repeat because I lost it when I caught it on a tree while driving in Woods. There are short ones that do not use the Stem hole, but I use this one because I do not have to worry about where to put the cap when refueling and it does not get dirty. View detail
PinGelCook！
fcr33πI changed to PinGel to install the carburetor because of the Gasoline flow rate, even though the OEMCook does not interfere with it. The main purpose of this project is for appearance, but… I think it's a good idea.
As other reviewers have mentioned, the hole on the tank side has to be cut down a little to make it larger.
I have wrapped a couple of rolls of seal tape around it and I am happy with it, no gasoline leaks and better parenthesis. If it were a little cheaper, I would have no complaints.
View detail
Fine rust powder passes through.
Take it for a spin on the Hose from the Fuel Cock to the Carburetor. It is better than nothing. By the way, the rust powder of Tank passes through and enters the carburetor. Plastic deteriorates quickly over time, so we keep some in stock in case it breaks down. Replacing the fuel Pipe is quite tricky as it seems to be a simple but important part. View detail
Fits: HONDA CUB-based Engine (CD), HONDA CUB-based Engine (CL), HONDA BENLY90 S, HONDA BENLY50CD90, HONDA MONKEY, HONDA APE 50, HONDA MONKEY, HONDA GORILLA, HONDA APE 100 TypeD, HONDA GORILLA, HONDA APE 100
Used in MONKEY
In this case, we are using 88? but it is also sufficient to supply 115? Motorcycle.
If you bore up, this is safer than OEM.
View detail
Super fuel hose set I.D.Φ3×1m
Used for carburetor overflow hose
I bought Pink last time but 1m was not enough so I bought more.
I decided to use a two-tone color anyway, so I went with Green this time. It is now easier to visually inspect each cylinder.
Now we can also verify which one is more durable. v
Compared to Pink, which is squishy and easy to handle, Large is harder. It is almost as hard as a normal Vinyl type.
Pink is easier to handle (it is soft and stretchy, so you can get a little bit of mouthfuls in the SizeOver area), but either is fine for Overflow.
Green is recommended for use in areas with tight bends, where the pipe is not easily crushed.
As a side note, I always reserve KITACO's Package (plastic) because of the above etc.
It can be used to make a washer for the gap between the clutch lever and holder when there is more play between the clutch lever and holder, or to make a collar to prevent sticking between the accelerator grip and switch holder. And it's free.
View detail