Reviews
Filter part is pricey
If you want to put a Filter between the Fuel lines, it is difficult to bend the Hose if it is short, but if it is angled like this product, it will be neat. View detail
I like the way it looks.
The Fuel Hose is Black and invisible. I bought it because it seemed to have a good evaluation here to prevent foreign object contamination.
It is a good product because you can see inside and check the status, and it can be detached and disassembled for cleaning.
It is somewhat heavy, but is it reinforced to prevent damage? I thought so.
View detail
Be careful how you handle it or it will crush you.
I purchased this product for the installation of a Fuel Filter.
Because of its thin wall thickness, tight handling will cause the hose to collapse and reduce the flow of Gasoline.
I find it convenient to be able to visually see the flow of Gasoline due to its translucency.
It is not as durable as Rubber hose, but I think it is unlikely that you will run out of this one purchase.
View detail
For Sub tanks
I bought this because of the possibility of contamination of garbage when using a Sub tank without any Filter.
I have no complaints, but I found it a little confusing that there is no description of the direction of the Filter.
View detail
KIJIMAFuel Filter
I tried installing a cheap Filter before.
I purchased KIJIMA's Filter, which looks great this time!
It's a Glass type that allows you to see inside well and clean it, so it's a commendation!
View detail
Nylon meshL shape
There are many types of Fuel filters, but it is difficult and troublesome to know which one to buy at a glance.
I needed an L-shape for handling, but it was a hassle to find an L-shaped Gold genus Filter one, so I went with this one.
View detail
I bought a few different kinds.
I have been using PaperType so far, but I also bought Nylon mesh Type.
Nothing personal, but it is a little more compact, so handling in the vicinity of the carburetor is improved. The resistance is gone, but I am observing whether the Float chamber contains Garbage or not.
View detail
As a carburetor for RepairHose
The carburetor hose was ruined, so I purchased this product to replace it.
The vehicle model is Husqvarna 2016 TE250.
Hose with an inner diameter of 4φ×outer diameter of 7φ and a length of 1m.
Clip×Quantity:2pc. I am glad that it comes with Set.
It is not long enough to replace all of the hoses used on off-road motorcycle carburetors.
In this case, you need to check in advance how many meters you need and look for longer products or buy several of them.
View detail
Since durability is from now, it cannot say anything, but it is somehow good touch!
Since durability is from now, it cannot say anything, but it is somehow good touch! View detail
Easy to use
I use it to bleed air out of brake fluid and it is very convenient.
The length is 1 meter, so it can be cut to any length, making it easy to use.
I like that it is transparent so I can see what is inside.
View detail
Fuel Hose for old Scooter
When replacing the Fuel Hose on an old Scooter, I installed this Fuel Fliter to kill two birds with one stone, since bending the Fuel Hose to 90-degrees eliminates bending of the Hose. The fuel flow is also visible, so maintenance is easy. View detail
As a precautionary measure.
I used it on a MONKEY Fuel Tank that I had rusted off.
I had the tank rusted and the holes repaired, but I wasn't sure if the Garbage, Sludge, etc. were completely removed, so I put it on.
It certainly seemed to work, but as a result, the Filter itself became clogged with Gas and became unusable.
Thanks to you, there is no inflow of impurities into the carburetor and it works (laughs).
View detail
Larger than expected
If you have a car that doesn't have a space, you can install it, but it will be a bit messy and unparenthesis. Garbage removal performance is fine. The flow rate is also fine. View detail
good
The texture is good. It is stretchy and not troubling performance as Hose.
In my case, I did not use it as Oil Resistant Hose, but I wanted to prevent scratches on the wiring part, so I used it as a tube through the wiring. In this way, it prevents scratches and makes it look a little better.
View detail
Sub tank.
I'm using it in a Sub tank I made myself with an oiler and some leftover fuel hose. I cleaned it before use, but I installed it so that dust from inside the Oiler and Hose would not go to the Carburetor as it is not used frequently. I can't say for sure how effective it is, but I use it just in case. View detail
for Replacement
I bought it because the product description said it was for Hose I.D. 8/9mm, but the Package of the actual product has a compatible Hose I.D. 8mm. I wanted to have Φ9 correspondence. At any rate, I put it on and will try to see, but it may be a little too small.
The thing is Compact and it doesn't look bad.
View detail
I chose the Magnet type.
I tried to remove the rust from the tank, but it was not done properly, and there was a clogging of the carburetor jets with fine iron powder.
It doesn't remove 100%, but I think it's more effective than just Mesh filterType.
However, the durability of the body is not good, and the insertion port broke from the root when removing and installing Hose in about one year.
View detail
Fuel Hose Replacement Spare Parts
The XL1200 Fuel Hose has deteriorated a bit, so I measured and purchased the size.
I haven't used the product yet, but considering the price of OEM parts, it's more affordable to buy this one.
View detail
it is normal
I use it for my hand made sub tanks used for maintenance I can now cut the fuel and it is very convenient I can use it normally View detail
~ Subtle
I installed it because Tank had Rust.
When decomposing, there are always so many Rusts in the Float room that are reasonably large.
I will make it a paper Filter.
View detail