Reviews
Filter part is pricey
If you want to put a Filter between the Fuel lines, it is difficult to bend the Hose if it is short, but if it is angled like this product, it will be neat. View detail
periodic replacement
I installed it to prevent foreign matter from entering the tank, and it is about time for regular replacement. The price is not that much, I can see how dirty it is, and it is easy to replace, so I think it is easy to use. View detail
Fits: HONDA MONKEY, HONDA MONKEY
The direction of removal is ….
[How is it used?
SpiDer125 OEMCook is broken and is on Replace
Since it is not easy to find a cook for M12 female thread installation….
Was the one you received as per Image?
main idea
Was the installation difficult?
There is nothing difficult about it, but you need to be careful around fuel.
How was your experience with it?
Phi;8 is Overspecified for SpiDer125
[Included Parts:were they on?
Hose and Clip with I.D.Φ8, StrainerNet was included, which could not be installed as it is because the diameter of the end does not match!
[Was there anything that disappointed you?
The panelParts on the front of the Cook are not Screws but Rivet?
The SpiDerOEM is right, whereas the SpiDerOEM is left, so the Fuel Hose is a little more difficult to handle.
When the transparent hose is turned around at a steep angle, it breaks, so I use a hose with an inner diameter of Φ8 and an outer diameter of Φ8 with an inner diameter of Φ5.
View detail
I like the way it looks.
The Fuel Hose is Black and invisible. I bought it because it seemed to have a good evaluation here to prevent foreign object contamination.
It is a good product because you can see inside and check the status, and it can be detached and disassembled for cleaning.
It is somewhat heavy, but is it reinforced to prevent damage? I thought so.
View detail
KN Planning Fuel Hose
I am satisfied that this Size can be used by OEMs without any problems
The 6MM is a little too large for me, so this is the best size for me.
View detail
Be careful how you handle it or it will crush you.
I purchased this product for the installation of a Fuel Filter.
Because of its thin wall thickness, tight handling will cause the hose to collapse and reduce the flow of Gasoline.
I find it convenient to be able to visually see the flow of Gasoline due to its translucency.
It is not as durable as Rubber hose, but I think it is unlikely that you will run out of this one purchase.
View detail
Fits: KAWASAKI Z1000 (air-cooled), KAWASAKI Z1000 (air-cooled), KAWASAKI Z750 (air-cooled), KAWASAKI Z750 (air-cooled), KAWASAKI Z750-D1 (KZ750D), KAWASAKI Z900 (KZ900), KAWASAKI Z1 (900SUPER4), KAWASAKI Z1000 MkII, KAWASAKI Z2 (750RS), KAWASAKI Z750FX, KAWASAKI Z1 (900SUPER4), KAWASAKI Z1000 MkII, KAWASAKI Z2 (750RS), KAWASAKI Z750FX
Will we know if it's good or bad after riding it for a while?
I put it between each Carburetor from the Fuel Cock, but the Filter itself is Slim, so it doesn't feel out of place.
I think it is a good product because it is transparent, making it easy to detect foreign objects.
View detail
cheapness is the name of the game
I think it is possible to find OEM parts, but the Breather Hose 650mm 6mm Diameter from the rear of the crankcase of CUB series engines was out of stock, so I substituted it with this one of the same size.
I don't want to be speculative, but this Hose in a different Size was falling apart after a year, so it might be better to buy it if you want it for now with the intention of replacing it frequently.
View detail
May be easy to loosen.
I bought it because it is a Pressure Resistant, Oil Resistant Hose.
Leather mesh inevitably tends to unravel at the edges.
Well, that is acceptable.
The problem is that the inside Hose might be easy to loosen.
I used Oil Resistant Hose from KIJIMA or DAYTONA without Clamp and it never came loose.
I wonder if that is Minus.
View detail
For Sub tanks
I bought this because of the possibility of contamination of garbage when using a Sub tank without any Filter.
I have no complaints, but I found it a little confusing that there is no description of the direction of the Filter.
View detail
KIJIMAFuel Filter
I tried installing a cheap Filter before.
I purchased KIJIMA's Filter, which looks great this time!
It's a Glass type that allows you to see inside well and clean it, so it's a commendation!
View detail
Nylon meshL shape
There are many types of Fuel filters, but it is difficult and troublesome to know which one to buy at a glance.
I needed an L-shape for handling, but it was a hassle to find an L-shaped Gold genus Filter one, so I went with this one.
View detail
I bought a few different kinds.
I have been using PaperType so far, but I also bought Nylon mesh Type.
Nothing personal, but it is a little more compact, so handling in the vicinity of the carburetor is improved. The resistance is gone, but I am observing whether the Float chamber contains Garbage or not.
View detail
Fits: KAWASAKI 500SS Mach III (H1), KAWASAKI 750SS Mach IV (H2), KAWASAKI Z1 (900SUPER4), KAWASAKI Z1000, KAWASAKI Z2 (750RS), KAWASAKI Z750, KAWASAKI Z900 (KZ900), KAWASAKI 500SS Mach III (H1), KAWASAKI 750SS Mach IV (H2), KAWASAKI Z1 (900SUPER4), KAWASAKI Z1000, KAWASAKI Z2 (750RS), KAWASAKI Z750, KAWASAKI Z900 (KZ900)
Used for Z750four
I purchased this to change the location of the Overflow hose that was previously attached.
I had previously purchased and installed a PMC one, but it seemed somewhat thin and meager in comparison.
There are no problems with installation or use.
The price is low, so this is sufficient for those who only need it for the time being.
The look and texture was not great.
I thought PMC's would be next.
View detail
As a carburetor for RepairHose
The carburetor hose was ruined, so I purchased this product to replace it.
The vehicle model is Husqvarna 2016 TE250.
Hose with an inner diameter of 4φ×outer diameter of 7φ and a length of 1m.
Clip×Quantity:2pc. I am glad that it comes with Set.
It is not long enough to replace all of the hoses used on off-road motorcycle carburetors.
In this case, you need to check in advance how many meters you need and look for longer products or buy several of them.
View detail
Small Type
Small type as a fuel fliter, and since it is a paper base, it is the one that you should be most careful about in terms of narrowing down the flow rate.
However, because it is a Small Type, there are many cases that are convenient for placement.
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Gasoline Hose
About quality and texture be well-organized Hose and clip About the feeling of use Takegawa High Flow Fuel Cock does not fit well with standard products, but the hose did not feel durable Products to buy together hose clip Difficulty of installation easy , simple Cost performance and comparison with other products It feels similar compared to other hoses. It's not much different, but it's cost-effective About shipping and packaging It took a week and the packaging is great Any concerns, cautions, or advice when purchasing I tried to change the hose line because the oil tank was old and foreign substances came out, but the internal diameter of the SPTAKEGAWA High Flow Fuel Cock did not fit, so I will leave it as a spare and use it to replace the vaporizer hose View detail
I'd like to see more detailed Specifications.
Used for Repair of Fuel Hose of LIVE DIO.
Description. Its double-layer construction makes it highly resistant to oil." I would like to see other specifications written in detail, since it is a Fuel Hose, so it is natural that it has excellent oil resistance.
The DAYTONA's hose says "Inside:00, outside:△ △ △, heat resistant temperature:? The temperature resistance is 0.5 to 1 degree Celsius.
I'm not saying that NTB's stuff is bad, but it would be easier for buyers to choose if you wrote down the details.
I chose NTB because they had a good size, price, and reliability.
Maybe this will be Large sturdy until I let it go.
View detail
Since durability is from now, it cannot say anything, but it is somehow good touch!
Since durability is from now, it cannot say anything, but it is somehow good touch! View detail
Fits: HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY
It purchased to repair of the [Webike-monitor] original manufacturer's product. Since it was cheaper than brand-name parts, it was good.
It purchased to repair of the [Webike-monitor] original manufacturer's product.
Since it was cheaper than brand-name parts, it was good.
View detail