Reviews
Fits: KAWASAKI 750SS MACHIV H2 , KAWASAKI 750SS MACHIV H2 [Mach].
Required when PinGel is installed
Required when attaching PinGelCook
We used it for MACH.
Use less-used water tapes for installation
Buy at Home center.
View detail
carrying out workability good by moderate softness -- it is
carrying out workability good by moderate softness -- it is View detail
Purchased for Restore for my old car.
The OEM parts were missing, so we used the alternative parts, but we are satisfied with the included clips. View detail
I utilized it on my old car!
The Hose Band was also included, which was a big help to us. View detail
First GSHose replacement in 7 years
The Fuel Hose of GB250 CLUBMAN has deteriorated and we decided to replace it.
We all know that regular replacement is a must, but we keep putting it off...!
I think this product is kind because it comes with a hose clip. I feel more satisfied with the elasticity of the new one than with the rigid and deteriorated one.
I know that deterioration of Rubber is inevitable, but since it is a double-layered structure, I expect it to be durable.
View detail
Can be visualized
I have had no problems without using Fuel Filter until now.
However, I saw someone I know wearing it and bought it to try it out because I could visualize the iron dust-like substance being removed.
Installation takes only a few minutes with no problems. I recommend it to anyone who cares to visualize it.
View detail
Fits: HONDA CUB-based Engine (CD), HONDA CUB-based Engine (CL), HONDA BENLY90 S, HONDA BENLY50CD90, HONDA MONKEY, HONDA APE 50, HONDA MONKEY, HONDA GORILLA, HONDA APE 100 TypeD, HONDA GORILLA, HONDA APE 100
pe24
While installing SP TAKEGAWA S STAGE BOREUP 115cc and SP takegawa KEIHIN PE24 Carburettor, I installed the SP Takegawa Tank High Flow Fuel Cock to supply stable gasoline. Easy to install and no problem in operation View detail
As per Spec. It looks thick and sturdy!
It was used for the modification to organize the tank to filter to carburetor. The outer diameter is as per the spec. and seems to be sturdy, but it is very difficult to handle. The attached fixed clip doesn't work at all. Even if it was made by another company, it wouldn't work. (Lol) View detail
Easy to use
The ZOOMER OEM fuel hose has a 4.5mm inner diameter, so I could not find the same system in Other Brand Products. I used this product and a conversion joint to install it. The product is inexpensive and easy to purchase, but it is difficult to know if the installation is good or bad without actually assembling such a product. View detail
Temporary Fuel Tank Cook
I purchased this for replacement because of gasoline leakage from the cook of a temporary simple tank that is used when the fuel tank is removed for maintenance of the motorcycle and the engine is running. The cook can be switched smoothly without any hardness. The cook is a rubber part, so if the lever is left in place for a long period of time, the life of the cook will be shortened, so I think it is necessary to periodically move the lever and grease it up. View detail
Easy to use
It has moderate flexibility and is easy to use. I've used it on old Breeder, Fuel Hose, etc.
The translucent design made it easy to check the condition of the inside.
View detail
Solid for the price.
The KSR80 from Tank to Carburetor is exactly this delicate size. To be honest, it is so long that it does not need to be this long.
The included Clip is almost useless as it does not spread out.
View detail
Fits: KAWASAKI 500SS Mach III (H1), KAWASAKI 750SS Mach IV (H2), KAWASAKI Z1 (900SUPER4), KAWASAKI Z1000, KAWASAKI Z2 (750RS), KAWASAKI Z750, KAWASAKI Z900 (KZ900), KAWASAKI 500SS Mach III (H1), KAWASAKI 750SS Mach IV (H2), KAWASAKI Z1 (900SUPER4), KAWASAKI Z1000, KAWASAKI Z2 (750RS), KAWASAKI Z750, KAWASAKI Z900 (KZ900)
I think this Size is for Large body Drain type.
Used for Drain hose on TM-MJN24.
I think the Oil Resistant Hose sold at home centers is fine, but most of the ones sold at home centers are pink, and the long hose does not look good, so I bought it even though it is expensive.
I wish it were a little cheaper, but it's oil-resistant and long, so I'm satisfied.
View detail
Fits: HARLEY-DAVIDSON all models of vehicles
Cheaper than OEM
It's cheaper than OEM and can be used as usual. I'm very grateful to have such a product in my line up. View detail
Fall TypeCook fits into OEM Side cover
Replaced carburetor with PWK28.
It's a little closer to the top of the left side, but it fits in the hole of the side cover without any problem.
It would be better if it had an OEM look, but the location is inconspicuous, so it's perfectly fine.
One thing I'd like to see improved is that the Yamaha OEMs at the time were lower ⇒ later ⇒ upper, but this one is lower ⇒ front ⇒ upper, which is a bit confusing to the senses.
View detail
Available for Repair
The Filter section had a Gold Net in it....
No fuel leakage and fully usable.
I'm glad it was cheaper than OEM.
View detail
Prevention of Fuel Hose Bending
I think the main purpose is to Catch rust and Garbage with Filter, but I bought 90-degreesType to solve the bending of Hose.
A little more compact would be even better.
View detail
To prevent foreign objects from entering
[How is it used?
I used it on my TZr250R.
We do have rust removal on the Fuel Tank and of course the Cook has a Filter, but we use it as an insurance policy to prevent as much rust and Garbage from flowing away.
Was the one you received as per Image?
If you have a vehicle with limited space, it's a good idea to check the installation position beforehand.
How was your experience with it?
Hose inner diameter is φ8mm, so I cut off the tip part with Cutter and then installed it.
I've only run the engine a little bit since installation, but so far the flow rate seems fine.
I can't confirm the visible foreign body etc. at the moment, but it seems to catch it well.
[Points to note]
If you just look at the Body, you'll want to put it on backwards, but the orientation is as shown in the picture.
I don't think it's a problem because it's in the description, but you need to check the mounting direction.
How did it compare to other products?
This is my first time installing a Filter, so I don't know about other products, but it's good that it can be used for both φ6 and φ8m, so it can be used in any car model.
【Review】
You don't have to measure every Hose inner diameter, but you can be sure to buy this product.
It seems that only Gasoline flow rate may be a problem, so you need to be careful there.
View detail
A must have for old cars
This is a must have for old cars, I used it on my CRcarburetor. I used it on my CRcarburetor. It looks good and is transparent so you can see inside.
But once I put the Hose on and tried to take it off again, it broke ….
Well, it's a cheap Parts, so what can I do?
View detail
It's also highly universal.
I bought this for my SJ13 RMX250S, although it was not listed as a compatible model, and I found it when I was looking for something to replace the OEM Product's quote, which was a horrible price (as is the case with older SEA BASS models). If it is the Off car which there is room in the space originally, there is no sense of discomfort especially though the handling and the length do not go as far as Exactly. I am grateful to be able to buy a new product for about 1/5 of the OEM product when compared to buying a mid-range product with an unknown identity and disassembling and cleaning it at NetOaktion. View detail