Reviews
useless
It is useless unless you use a filter. Moreover, if you use it for a long time, the fuel will not stop. Stable Chinese quality. View detail
KN Planning Fuel Hose
I am satisfied that this Size can be used by OEMs without any problems
The 6MM is a little too large for me, so this is the best size for me.
View detail
It was not Fuel Cock.
From the beginning, the fuel was unstoppable.
So I repurchased another company's product.
View detail
May be easy to loosen.
I bought it because it is a Pressure Resistant, Oil Resistant Hose.
Leather mesh inevitably tends to unravel at the edges.
Well, that is acceptable.
The problem is that the inside Hose might be easy to loosen.
I used Oil Resistant Hose from KIJIMA or DAYTONA without Clamp and it never came loose.
I wonder if that is Minus.
View detail
Filtration capacity is unknown but to prevent Rust contamination.
[How is it used?
TZr250R (3XV) It is used for
Although 10mmSize Filters are hard to find, we chose this product from Brand, which is one of the most inexpensive and reliable.
Was the one you received as per Image?
It is larger than expected and takes up rather a lot of space.
L-shaped would have been better,...
Was the installation difficult?
It is simple to interrupt the Fuel line.
There is a direction, so you need to make sure that you do not make that mistake.
How was your experience with it?
I am not sure if the Filter is working properly, but so far I have not had any problems.
The transparent body allows you to check the internal condition of the product.
How did it compare to other products?
I've also used Daytona's Filter, but I'm not sure of the filtration capabilities of either!
It is safe to put it on an old car for now.
[Points to note]
Only the mounting orientation must be taken care of.
Also, be careful of the size, as it is quite large.
【Review】
I don't know about filtration capacity, but I guess it's better than nothing. I think it is.
10mm filters are not so common, and not many manufacturers offer them, but we were glad to find them in the lineup.
View detail
It is a good item
No fuel leaks and very pleasant, it is painted in color and has a nice texture. View detail
OEM Product No. Due to Discontinuation
After warming up, start running and EngineStall.
The fire is not flying, so I replaced the CDI, but it does not hang Engine.
I did a fuel check and Gasoline was not coming.
I thought it was a fuel pump, so I replaced it.
When I re-button the Pump later, it catapulted.
When I saw the Filter when I was doing the Pump exchange.
Black with rust from Tank. perhaps a clogged Filter?
That's why I bought it. The middle one is the OEM Product that was replaced a year ago and has probably been without replacement for over 30 years (lol).
The one I used for the past year is not shown in the picture because I cleaned it and still use it since I didn't have any parts on hand (lol).
As you can see, it has the same shape as the OEM Product.
It is fastened with an elastic band, and the installation is secure.
OEM Product is probably discontinued, so thanks for the Large change.
By the way, a year ago, the fuel TubeQuantity:The Set also included a Filter, but it is already out of date.
I thought the rust on the tank was pretty much gone.
I had no idea it was still in Filter.
From now on, I'll be changing Filters regularly (laughs).
View detail
![[Motoforce]CollarFuel Hose](https://img.webike-cdn.net/catalogue/images/93333/07162058_60f17470d00f2_TS.jpg)
Cute! That's all!
Durability is unknown as time has not yet passed. The color is cute. Nothing more, nothing less. View detail
Temporary Fuel Tank Cook
I purchased this for replacement because of gasoline leakage from the cook of a temporary simple tank that is used when the fuel tank is removed for maintenance of the motorcycle and the engine is running. The cook can be switched smoothly without any hardness. The cook is a rubber part, so if the lever is left in place for a long period of time, the life of the cook will be shortened, so I think it is necessary to periodically move the lever and grease it up. View detail
Securing flow rate
Used for TMR; Tank is PinGelSingle Silencer with Quantity:This is the best hose I've ever used because it's reasonable. View detail
Available for Repair
The Filter section had a Gold Net in it....
No fuel leakage and fully usable.
I'm glad it was cheaper than OEM.
View detail
Safe feeling of the same etc. as HondaOEM Product
This is the Fuel Hose! This is the best choice. View detail
Installed on gsf1200
Note the heat near the Engine.
Curled …
I didn't even get a Paper-type stinker.
It was good, though.
View detail
KN Planning Fuel Filter 6mm
Great little filter, I prefer the paper filter because I think they filter finer material better than the screen type. Has a 6mm ID for small capacity fuel lines. Fits nicely because it is quite small - see the picture with a spark plug for scale. View detail
Rubber is hard.
Fuel Hose has deteriorated and has been replaced.
Made of KevlarMesh?
Therefore, even if the R (R) of the Hose placement is bent a little too steeply, it will still function without collapsing in the Hose.
It's solid for that and is stiff and painful to finger when inserting it into the Fuel Cock.
View detail
I think it's a good idea to put it on if it's before the tank wash.
With the maintenance of the immobilized car, the carburetor was given the highest priority before moving on to the tank cleaning, so it was before the dirt was removed from the tank at the time of the engine start confirmation.
Therefore, by adding this filter, I was able to confirm engine start-up even before Rust was dropped.
If the Rust gets clogged up after cleaning the carburetor, all your hard work will be for naught.
View detail
Easy to use but not very durable
I used it to change the Fuel Cock from the negative pressure type to the fall type.
The shape is Compact, and I had no trouble with the mounting location, but I installed it in January and replaced it in August because the Gasoline leaked.
View detail
As the secondary side of the fuel Pump Hoose
Purchased as a Hoose pumping Gasoline from Fuel Pump to Carburetor He Gasoline and The OEMHose has cured and partially unraveled cracks and meshes, and also has been damaged by Yamaha's We were having trouble finding OEM parts for this product This product has a moderate flexibility, and as a pressure resistant gasoline hose, it has the thickness and It was installed with no problems It is very flexible, and even if it is bent a little, the cross-sectional area of the hose can be secured, so the fuel passage can be secured It was only 20cm long, but it is long enough to be about 1m long I think I will replace it with the rest of the hose as soon as possible As for the durability, I will see how it works View detail
Gasoline leak after a few months of use
We bought it because it was cheaper than similar products from other companies, but after a few months of installation, the Cook Gasoline leaked from the Lever area and became unusable
It's like cheap and bad
View detail
Two-stage installation on Fuel Cock that won't stop leaking fuel
It is BETAtechno which was given by a relative, but packing of Fuel Cock deteriorates and the packing of the Fuel Cock is Fuel seems to flow to the cylinder even if the cylinder is turned off When the fuel doesn't stop, it is difficult to run the engine So I installed the Fuel Cock from KN Planning by Inline is not available
? What made you decide to buy? The price is low
? How was your experience with it? Definitely fuel stopping; the KICK is heavy, but it starts great
? Was it difficult to install? (In the case of hard parts) Just let them interrupt you with Inline
? What is the point or hang of installation (for hard parts)? It has a screw on it, but it was out of the groove when I bought it It needs to be checked
? How does it feel when you wear it and what is your height, weight, etc. (in the case of Apparel)? Any
? [Was there anything that disappointed you? Make sure the threads are in the grooves, otherwise they will not perform as they should
? Do you have any wishes or improvements you would like to make for the Manufacturer? None in particular
? [Do you have any products to compare it to? None
? [Others] Any
View detail